NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

board: Add Vyasa RK3288 board support

Browse Source 
Add Vyasa board, from rk3288 family SOC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
Jagan Teki 2018-01-30 13:03:53 +01:00 committed by Peter Korsgaard
parent 30daaed193
commit cdbb96e0b1
8 changed files with 117 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitlab-ci.yml
View File

@ -67,6 +67,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig
acmesystems_aria_g25_256mb_defconfig: *defconfig acmesystems_aria_g25_256mb_defconfig: *defconfig
acmesystems_arietta_g25_128mb_defconfig: *defconfig acmesystems_arietta_g25_128mb_defconfig: *defconfig
acmesystems_arietta_g25_256mb_defconfig: *defconfig acmesystems_arietta_g25_256mb_defconfig: *defconfig
amarula_vyasa_rk3288_defconfig: *defconfig
arcturus_ucp1020_defconfig: *defconfig arcturus_ucp1020_defconfig: *defconfig
arm_foundationv8_defconfig: *defconfig arm_foundationv8_defconfig: *defconfig
arm_juno_defconfig: *defconfig arm_juno_defconfig: *defconfig

2
DEVELOPERS
View File

@ -782,8 +782,10 @@ N: Ismael Luceno <ismael@iodev.co.uk>
F: package/axel/ F: package/axel/
N: Jagan Teki <jagan@amarulasolutions.com> N: Jagan Teki <jagan@amarulasolutions.com>
F: board/amarula/
F: board/bananapi/ F: board/bananapi/
F: board/engicam/ F: board/engicam/
F: configs/amarula_vyasa_rk3288_defconfig
F: board/friendlyarm/nanopi-a64/ F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/ F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/ F: board/olimex/a64-olinuxino/

4
board/amarula/vyasa/extlinux.conf Normal file
View File

@ -0,0 +1,4 @@
label Vyasa linux-next
kernel /boot/uImage
devicetree /boot/rk3288-vyasa.dtb
append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait

21
board/amarula/vyasa/genimage.cfg Normal file
View File

@ -0,0 +1,21 @@
image sdcard.img {
hdimage {
}
partition u-boot-tpl-spl-dtb {
in-partition-table = "no"
image = "u-boot-tpl-spl-dtb.img"
offset = 32K
}
partition u-boot-dtb {
in-partition-table = "no"
image = "u-boot-dtb.img"
offset = 8M
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

3
board/amarula/vyasa/linux_gmac.fragment Normal file
View File

@ -0,0 +1,3 @@
# Currently mainline kernel exhibits issues when running rockchip gmac
# on the board, so enable it as loadable module and insert it later
CONFIG_DWMAC_ROCKCHIP=m

9
board/amarula/vyasa/post-build.sh Executable file
View File

@ -0,0 +1,9 @@
#!/bin/sh
MKIMAGE=$HOST_DIR/bin/mkimage
BOARD_DIR="$(dirname $0)"
$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

31
board/amarula/vyasa/readme.txt Normal file
View File

@ -0,0 +1,31 @@
Vyasa RK3288
============
Vyasa is RK3288 based Single board computer with fully supported opensource software.
https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288
How to build it
===============
$ make amarula_vyasa_rk3288_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build rootfs image:
$ make
Prepare your SDCard
===================
Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):
$ sudo dd if=output/images/sdcard.img of=/dev/xxx
$ sudo sync
Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.

46
configs/amarula_vyasa_rk3288_defconfig Normal file
View File

@ -0,0 +1,46 @@
# Architecture
BR2_arm=y
BR2_cortex_a17=y
BR2_ARM_FPU_NEON_VFPV4=y
# Linux headers same as kernel, a 4.14 series
BR2_KERNEL_HEADERS_4_14=y
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/openedev/linux-openedev"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d127129e85a020879f334154300ddd3f7ec21c1e"
BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment"
# Filesystem
BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288"
BR2_TARGET_GENERIC_ISSUE="Welcome to VYASA RK3288!"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/vyasa/post-build.sh"