diff --git a/DEVELOPERS b/DEVELOPERS index dc82bd6424..773cdd5576 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1867,6 +1867,8 @@ F: package/libavl/ N: Michał Łyszczek F: board/altera/socrates_cyclone5/ +F: board/pine64/rock64 +F: configs/rock64_defconfig F: configs/socrates_cyclone5_defconfig F: package/netifrc/ F: package/openrc/ diff --git a/board/pine64/rock64/extlinux.conf b/board/pine64/rock64/extlinux.conf new file mode 100644 index 0000000000..bf71982a9f --- /dev/null +++ b/board/pine64/rock64/extlinux.conf @@ -0,0 +1,4 @@ +label rock64-buildroot + kernel /boot/Image + devicetree /boot/rk3328-rock64.dtb + append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait diff --git a/board/pine64/rock64/genimage.cfg b/board/pine64/rock64/genimage.cfg new file mode 100644 index 0000000000..0b5a0d8804 --- /dev/null +++ b/board/pine64/rock64/genimage.cfg @@ -0,0 +1,23 @@ +image sdcard.img { + hdimage { + } + + partition uboot-spl { + in-partition-table = "no" + image = "u-boot-tpl-spl.img" + offset = 32768 # 512 * 0x40 from start of sd card + } + + partition uboot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 262144 # 512 * 0x200 from start of sd card + } + + partition rootfs { + partition-type = 0x83 + bootable = "yes" + image = "rootfs.ext2" + size = 500M + } +} diff --git a/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch new file mode 100644 index 0000000000..2d35b78daa --- /dev/null +++ b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch @@ -0,0 +1,32 @@ +From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= +Date: Tue, 5 Feb 2019 22:08:54 +0100 +Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Michał Łyszczek +--- + Makefile | 5 +++++ + 1 file changed, 5 insertions(+) + +diff --git a/Makefile b/Makefile +index 8086f3c93e..a6425b5b03 100644 +--- a/Makefile ++++ b/Makefile +@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),) + ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom + endif + ++# rk3328 needs itb image to boot properly ++ifeq ($(CONFIG_ROCKCHIP_RK3328),y) ++ALL-y += u-boot.itb ++endif ++ + # enable combined SPL/u-boot/dtb rules for tegra + ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) + ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin +-- +2.18.1 + diff --git a/board/pine64/rock64/post-build.sh b/board/pine64/rock64/post-build.sh new file mode 100755 index 0000000000..26b53cba8e --- /dev/null +++ b/board/pine64/rock64/post-build.sh @@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/pine64/rock64/readme.txt b/board/pine64/rock64/readme.txt new file mode 100644 index 0000000000..029c67641e --- /dev/null +++ b/board/pine64/rock64/readme.txt @@ -0,0 +1,95 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Rock64. With this default configuration you +can log in into board via uart and look around. + +Board homepage: https://www.pine64.org/?page_id=7147 + +Build +===== + +First, load rock64 config for buildroot + + $ make rock64_defconfig + +Optionally make changes to buildroot config (to install more programs) + + $ make menuconfig + +And then build everything + + $ make + +When completed, following files will be generated in output/images directory: + + . + ├── Image + ├── bl31.bin + ├── bl31.elf + ├── rk3328-rock64.dtb + ├── rootfs.ext2 + ├── rootfs.ext4 -> rootfs.ext2 + ├── rootfs.tar + ├── sdcard.img + ├── u-boot-spl.bin + ├── u-boot-tpl-spl.img + ├── u-boot-tpl.bin + ├── u-boot-tpl.img + ├── u-boot.bin + └── u-boot.itb + +Creating bootable SD card +========================= + +!!! THIS COMMAND MAY WIPE YOUR DISK! +!!! MAKE SURE YOU PASSED CORRECT DEVICE! +!!! OR IT THIS WILL WIPE YOUR DISK! + +Simply invoke (as root) + + # dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device (not partition), of= argument may also be +/dev/mmcblk0 if you are using built-in sd card reader. + +Runtime +======= + +Login +----- + +By default, buildroot has no password, just type 'root' as login user, and +you will be logged in. + +Serial console +-------------- + +Serial console needs to be connected to pins (into 40pin rpi compatible part) + +pin 6: gnd +pin 8: tx +pin 10: rx + +Pin numbers are printed on board. + +Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate +with standard 8n1. + +Ethernet +-------- + +To enable ethernet you need to load modules for it: + +# modprobe stmmac +# modprobe dwmac-rk + +and since by default there is no dhcp installed, you need to configure ip +address, remember to change address to fit your network. + +# ifconfig eth0 up +# ip addr add 10.1.1.180/24 dev eth0 +# ping 10.1.1.1 +PING 10.1.1.1 (10.1.1.1): 56 data bytes +64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms diff --git a/configs/rock64_defconfig b/configs/rock64_defconfig new file mode 100644 index 0000000000..a9d29a424d --- /dev/null +++ b/configs/rock64_defconfig @@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS2" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.2" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-mainline-u-boot.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="release-2020-07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin" +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y