NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

board: add Beelink GS1 support

Browse Source 
Signed-off-by: Clément Péron <peron.clem@gmail.com>
[Peter: explicitly use kernel 5.3.12]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
Clément Péron 2019-10-27 20:21:29 +01:00 committed by Peter Korsgaard
parent ecaede1d82
commit b68022c7cb
7 changed files with 404 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
DEVELOPERS
View File

@ -595,6 +595,10 @@ F: package/libsemanage/
F: package/libsepol/
F: package/policycoreutils/
N: Clément Péron <peron.clem@gmail.com>
F: board/beelink/gs1/
F: configs/beelink_gs1_defconfig
N: Corentin Guillevic <corentin.guillevic@smile.fr>
F: package/libloki/

4
board/beelink/gs1/extlinux.conf Normal file
View File

@ -0,0 +1,4 @@
label linux
kernel /Image
devicetree /sun50i-h6-beelink-gs1.dtb
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

33
board/beelink/gs1/genimage.cfg Normal file
View File

@ -0,0 +1,33 @@
image boot.vfat {
vfat {
files = {
"Image",
"sun50i-h6-beelink-gs1.dtb",
"extlinux"
}
}
size = 64M
}
image sdcard.img {
hdimage {
}
partition u-boot {
in-partition-table = "no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8192
size = 1040384 # 1MB - 8192
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

39
board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch Normal file
View File

@ -0,0 +1,39 @@
From 523ab5be1a84e9aa15fb62c3a15a6338b01d3961 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
Date: Tue, 9 Apr 2019 00:15:06 +0200
Subject: [PATCH] plat: allwinner: common: use r_wdog instead of wdog
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some Allwinner H6 has a broken watchdog that doesn't
make the soc reboot.
Use the R_WATCHDOG instead.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
---
plat/allwinner/common/sunxi_pm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/plat/allwinner/common/sunxi_pm.c b/plat/allwinner/common/sunxi_pm.c
index 1d2dc938..13e13532 100644
--- a/plat/allwinner/common/sunxi_pm.c
+++ b/plat/allwinner/common/sunxi_pm.c
@@ -20,9 +20,9 @@
#include <sunxi_mmap.h>
#include <sunxi_private.h>
-#define SUNXI_WDOG0_CTRL_REG (SUNXI_WDOG_BASE + 0x0010)
-#define SUNXI_WDOG0_CFG_REG (SUNXI_WDOG_BASE + 0x0014)
-#define SUNXI_WDOG0_MODE_REG (SUNXI_WDOG_BASE + 0x0018)
+#define SUNXI_WDOG0_CTRL_REG (SUNXI_R_WDOG_BASE + 0x0010)
+#define SUNXI_WDOG0_CFG_REG (SUNXI_R_WDOG_BASE + 0x0014)
+#define SUNXI_WDOG0_MODE_REG (SUNXI_R_WDOG_BASE + 0x0018)
#define mpidr_is_valid(mpidr) ( \
MPIDR_AFFLVL3_VAL(mpidr) == 0 && \
--
2.20.1

279
board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch Normal file
View File

@ -0,0 +1,279 @@
From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
Date: Sun, 11 Aug 2019 22:38:57 +0200
Subject: [PATCH] arm: dts: sync dts for Allwinner H6
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sync Kernel DTS for Allwinner H6 boards.
Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
commit <d45331b00ddb> Linux 5.3-rc4
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
arch/arm/dts/sun50i-h6-pine-h64.dts | 12 ++++
arch/arm/dts/sun50i-h6.dtsi | 46 +++++++++++++++-
3 files changed, 131 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 54b0882bed..0dc33c90dd 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -14,6 +14,7 @@
compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
@@ -21,6 +22,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -41,6 +53,40 @@
};
};
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_aldo2>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -57,6 +103,15 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_aldo1>;
+};
+
&r_i2c {
status = "okay";
@@ -177,8 +232,29 @@
};
};
+&r_pio {
+ /*
+ * PL0 and PL1 are used for PMIC I2C
+ * don't enable the pl-supply else
+ * it will fail at boot
+ *
+ * vcc-pl-supply = <&reg_aldo1>;
+ */
+ vcc-pm-supply = <&reg_aldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 4802902e12..1898345183 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_bldo2>;
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_aldo1>;
+};
+
&r_i2c {
status = "okay";
@@ -243,10 +249,16 @@
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
};
};
+&r_pio {
+ vcc-pm-supply = <&reg_aldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index e0dc4a05c1..a117f479ae 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -101,7 +101,7 @@
#size-cells = <1>;
ranges;
- display-engine@1000000 {
+ bus@1000000 {
compatible = "allwinner,sun50i-h6-de3",
"allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
@@ -203,11 +203,32 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
sid: sid@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
};
+ watchdog: watchdog@30090a0 {
+ compatible = "allwinner,sun50i-h6-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x030090a0 0x20>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ /* Broken on some H6 boards */
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -243,6 +264,18 @@
bias-pull-up;
};
+ /*
+ * /omit-if-no-ref/ isn't supported by U-boot
+ * keep this comment to avoid bad sync with Linux
+ */
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
@@ -294,6 +327,8 @@
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -445,7 +480,6 @@
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -457,7 +491,6 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
- phy-names = "usb";
status = "disabled";
};
@@ -613,6 +646,13 @@
#reset-cells = <1>;
};
+ r_watchdog: watchdog@7020400 {
+ compatible = "allwinner,sun50i-h6-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x07020400 0x20>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_intc: interrupt-controller@7021000 {
compatible = "allwinner,sun50i-h6-r-intc",
"allwinner,sun6i-a31-r-intc";
--
2.20.1

4
board/beelink/gs1/post-build.sh Executable file
View File

@ -0,0 +1,4 @@
#!/bin/sh
BOARD_DIR="$(dirname $0)"
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

41
configs/beelink_gs1_defconfig Normal file
View File

@ -0,0 +1,41 @@
# Architecture
BR2_aarch64=y
BR2_ARM_FPU_VFPV4=y
BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
# Kernel Linux headers same as kernel, a 5.3 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.12"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y