diff --git a/DEVELOPERS b/DEVELOPERS index e89149cea0..55fd9344ef 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1068,7 +1068,9 @@ F: configs/qemu_* N: Gilles Talis F: board/freescale/imx8mmevk/ +F: board/friendlyarm/nanopi-r2s/ F: configs/freescale_imx8mmevk_defconfig +F: configs/friendlyarm_nanopi_r2s_defconfig F: package/cctz/ F: package/faad2/ F: package/fdk-aac/ diff --git a/board/friendlyarm/nanopi-r2s/extlinux.conf b/board/friendlyarm/nanopi-r2s/extlinux.conf new file mode 100644 index 0000000000..1ea0cdd8a5 --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/extlinux.conf @@ -0,0 +1,4 @@ +label NanoPi R2S linux + kernel /boot/Image + devicetree /boot/rk3328-nanopi-r2s.dtb + append root=/dev/mmcblk0p1 rw rootwait diff --git a/board/friendlyarm/nanopi-r2s/genimage.cfg b/board/friendlyarm/nanopi-r2s/genimage.cfg new file mode 100644 index 0000000000..a686b4f14e --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/genimage.cfg @@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "idbloader.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + offset = 16M + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-r2s/post-build.sh b/board/friendlyarm/nanopi-r2s/post-build.sh new file mode 100755 index 0000000000..1f5ff6a611 --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopi-r2s/readme.txt b/board/friendlyarm/nanopi-r2s/readme.txt new file mode 100644 index 0000000000..6d291cdd60 --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/readme.txt @@ -0,0 +1,57 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Nanopi R2S. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Nanopi R2S link: +https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282 + +This configuration uses ATF, U-Boot mainline and kernel mainline. + +How to build +============ + + $ make friendlyarm_nanopi_r2s_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +Files created in output directory +================================= + +output/images + +├── bl31.elf +├── boot.vfat +├── extlinux +├── idbloader.img +├── Image +├── rk3328-nanopi-r2s.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +└── u-boot.itb + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Nanopi R2S and power it up. The console +is on the serial line, 1500000 8N1. + +Notes +===== + +This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board. diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig new file mode 100644 index 0000000000..818c847f4b --- /dev/null +++ b/configs/friendlyarm_nanopi_r2s_defconfig @@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y