diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 43423e543a..91b4972109 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -226,6 +226,7 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig } mx6udoo_defconfig: { extends: .defconfig } nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } nanopi_r1_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index f94d3e4faf..c831d9d2d1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1606,6 +1606,8 @@ F: utils/config F: utils/diffconfig N: Marek Belisko +F: board/friendlyarm/nanopi-m4/ +F: configs/nanopi_neo4_defconfig F: package/libatasmart/ F: package/polkit/ F: package/sg3_utils/ diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf new file mode 100644 index 0000000000..91eef67fb9 --- /dev/null +++ b/board/friendlyarm/nanopi-neo4/extlinux.conf @@ -0,0 +1,4 @@ +label NanoPi Neo4 linux + kernel /boot/Image + devicetree /boot/rk3399-nanopi-neo4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg new file mode 100644 index 0000000000..966c869273 --- /dev/null +++ b/board/friendlyarm/nanopi-neo4/genimage.cfg @@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "idbloader.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh new file mode 100755 index 0000000000..1f5ff6a611 --- /dev/null +++ b/board/friendlyarm/nanopi-neo4/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt new file mode 100644 index 0000000000..07e3491459 --- /dev/null +++ b/board/friendlyarm/nanopi-neo4/readme.txt @@ -0,0 +1,53 @@ +Intro +===== + +NanoPi Neo4 is a RK3399 SoC based ARM64 board. + + +Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4 +Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html + +Build +===== + +Run NanoPi Neo4 configuration + + $ make nanopi_neo4_defconfig + +To build, run make comamnd. + + $ make + +Files created in output directory +================================= + +output/images + +├── bl31.bin +├── bl31.elf +├── Image +├── rk3399-nanopi-neo4.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +├── u-boot.itb +├── u-boot-spl-dtb.bin +├── u-boot-tpl-dtb.bin +├── u-boot-tpl-dtb.img +└── u-boot-tpl-spl-dtb.img + +Creating bootable SD card: +========================= + +Simply invoke (as root) + + # dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- + +Baudrate for this board is 1500000 diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig new file mode 100644 index 0000000000..6e507235cf --- /dev/null +++ b/configs/nanopi_neo4_defconfig @@ -0,0 +1,56 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.18" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4" +BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="70M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"