From 7b02ca842d5361253fe502747cdd380b67d94e47 Mon Sep 17 00:00:00 2001 From: Jan Havran Date: Sun, 21 Aug 2022 13:04:18 +0200 Subject: [PATCH] board/pine64/pinecube: new board Add support for PineCube with: - U-Boot 2022.04 - Linux 5.15.61 PineCube is a low-powered, open source IP camera with the following specs: - Allwinner S3 Cortex-A7 - 128 MiB DDR3 - 16 MiB SPI flash - 5 MPx OV5640 camera - MicroSD slot - 10/100M Ethernet with passive PoE - 802.11 b/g/n WiFi - Bluetooth 4.1 - USB 2.0 - 26 pins GPIO header - Microphone - IR LEDs for night vision Board homepage: https://www.pine64.org/cube/ Board wiki: https://wiki.pine64.org/wiki/PineCube Signed-off-by: Jan Havran Reviewed-by: Giulio Benetti Signed-off-by: Thomas Petazzoni --- DEVELOPERS | 4 +++ board/pine64/pinecube/extlinux.conf | 4 +++ board/pine64/pinecube/genimage.cfg | 34 ++++++++++++++++++++++ board/pine64/pinecube/post-build.sh | 5 ++++ board/pine64/pinecube/readme.txt | 31 ++++++++++++++++++++ configs/pine64_pinecube_defconfig | 45 +++++++++++++++++++++++++++++ 6 files changed, 123 insertions(+) create mode 100644 board/pine64/pinecube/extlinux.conf create mode 100644 board/pine64/pinecube/genimage.cfg create mode 100755 board/pine64/pinecube/post-build.sh create mode 100644 board/pine64/pinecube/readme.txt create mode 100644 configs/pine64_pinecube_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index f91c4e9a2b..241de082eb 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1494,6 +1494,10 @@ F: board/microchip/mpfs_icicle/ F: configs/microchip_mpfs_icicle_defconfig F: package/microchip-hss-payload-generator/ +N: Jan Havran +F: board/pine64/pinecube/ +F: configs/pine64_pinecube_defconfig + N: Jan Heylen F: package/opentracing-cpp/ diff --git a/board/pine64/pinecube/extlinux.conf b/board/pine64/pinecube/extlinux.conf new file mode 100644 index 0000000000..6a18d9a2cb --- /dev/null +++ b/board/pine64/pinecube/extlinux.conf @@ -0,0 +1,4 @@ +label buildroot + kernel /zImage + devicetree /sun8i-s3-pinecube.dtb + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait rw diff --git a/board/pine64/pinecube/genimage.cfg b/board/pine64/pinecube/genimage.cfg new file mode 100644 index 0000000000..398d45e2f7 --- /dev/null +++ b/board/pine64/pinecube/genimage.cfg @@ -0,0 +1,34 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-s3-pinecube.dtb", + "extlinux" + } + } + + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8K + size = 504K # 512KB - 8KB + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/pine64/pinecube/post-build.sh b/board/pine64/pinecube/post-build.sh new file mode 100755 index 0000000000..8dae08a47c --- /dev/null +++ b/board/pine64/pinecube/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf diff --git a/board/pine64/pinecube/readme.txt b/board/pine64/pinecube/readme.txt new file mode 100644 index 0000000000..4cf6df2110 --- /dev/null +++ b/board/pine64/pinecube/readme.txt @@ -0,0 +1,31 @@ +Intro +===== + +This directory contains a Buildroot configuration for building a +Pine64 PineCube. + +Board homepage: https://www.pine64.org/cube/ +Board wiki: https://wiki.pine64.org/wiki/PineCube + +How to build it +=============== + + $ make pine64_pinecube_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your PineCube and power it up. The console +is on the serial port 2, 115200 8N1 (check Wiki for board pinout). diff --git a/configs/pine64_pinecube_defconfig b/configs/pine64_pinecube_defconfig new file mode 100644 index 0000000000..8f60115f8f --- /dev/null +++ b/configs/pine64_pinecube_defconfig @@ -0,0 +1,45 @@ +# Target options +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y + +# Toolchain options +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y + +# System configuration +BR2_TARGET_GENERIC_HOSTNAME="pinecube" +BR2_TARGET_GENERIC_ISSUE="Welcome to Pine64 Pinecube" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/pinecube/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pinecube/genimage.cfg" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.61" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-s3-pinecube" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pinecube" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" + +# Required host utilities for building an SDCard image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y