From 7a0c134e7cebac125ebacaf52d5105ffe45cfe25 Mon Sep 17 00:00:00 2001 From: "Yann E. MORIN" Date: Tue, 24 Feb 2015 23:42:22 +0100 Subject: [PATCH] boards/raspberrypi: update instructions for Raspberry Pi 2 The instructions for the Raspberry Pi 2 (aka model B2) are the same as the ones for the Raspberry Pi, so: - state so in the existing readme - create a symlink raspberrypi2 -> raspberrypi Also fix typo in spelling of "Raspberry Pi" (two words, not one). Signed-off-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard --- board/raspberrypi/readme.txt | 11 ++++++++--- board/raspberrypi2 | 1 + 2 files changed, 9 insertions(+), 3 deletions(-) create mode 120000 board/raspberrypi2 diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt index ead9227a11..9bab374b67 100644 --- a/board/raspberrypi/readme.txt +++ b/board/raspberrypi/readme.txt @@ -1,9 +1,14 @@ -RaspberryPi +Raspberry Pi Intro ===== -To be able to use your RaspberryPi board with the images generated by +These instructions apply to all models of the Raspberry Pi: + - the original models A and B, + - the "enhanced" models A+ and B+, + - the model B2 (aka Raspberry Pi 2). + +To be able to use your Raspberry Pi board with the images generated by Buildroot, you have to choose whether you will use: * Volatile rootfs in RAM (the rootfs is an initramfs) or @@ -96,7 +101,7 @@ Mount the partitions (adjust 'sdX' to match your SDcard device): Install the binaries to the SDCard ---------------------------------- -At the root of the boot partition, the RaspberryPi must find the following +At the root of the boot partition, the Raspberry Pi must find the following files: * bcm2708-rpi-b.dtb [2] diff --git a/board/raspberrypi2 b/board/raspberrypi2 new file mode 120000 index 0000000000..fcdafc81ed --- /dev/null +++ b/board/raspberrypi2 @@ -0,0 +1 @@ +raspberrypi \ No newline at end of file