board: add Orangepi Zero3 support
Add initial support for Orangepi Zero3 board: - U-Boot 2021.07 fork by Orangepi - Linux 6.1.31 fork by Orangepi - Default packages from buildroot Enable CONFIG_MFD_AC200 as it is used directly by other module, resulting in build failure when disabled. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is contained in:
parent
f71774feac
commit
68969dcbf0
@ -1963,8 +1963,10 @@ F: package/ecryptfs-utils/
|
||||
N: Marcin Niestroj <m.niestroj@grinn-global.com>
|
||||
F: board/grinn/
|
||||
F: board/orangepi/orangepi-zero-plus/
|
||||
F: board/orangepi/orangepi-zero3/
|
||||
F: configs/grinn_*
|
||||
F: configs/orangepi_zero_plus_defconfig
|
||||
F: configs/orangepi_zero3_defconfig
|
||||
F: package/argparse/
|
||||
F: package/dt-utils/
|
||||
F: package/easydbus/
|
||||
|
1
board/orangepi/orangepi-zero3/linux.config
Normal file
1
board/orangepi/orangepi-zero3/linux.config
Normal file
@ -0,0 +1 @@
|
||||
CONFIG_MFD_AC200=y
|
34
board/orangepi/orangepi-zero3/readme.txt
Normal file
34
board/orangepi/orangepi-zero3/readme.txt
Normal file
@ -0,0 +1,34 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Zero3. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Zero3 link:
|
||||
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
|
||||
|
||||
This configuration uses Orangepi's fork of U-Boot and Linux kernel.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_zero3_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
57
configs/orangepi_zero3_defconfig
Normal file
57
configs/orangepi_zero3_defconfig
Normal file
@ -0,0 +1,57 @@
|
||||
BR2_aarch64=y
|
||||
BR2_cortex_a53=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h616"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,u-boot-orangepi,6fe17fac388aad17490cf386578b7532975e567f)/u-boot-orangepi-6fe17fac388aad17490cf386578b7532975e567f.tar.gz"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero3"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
|
||||
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
|
||||
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,linux-orangepi,3495b5ee0594566c9fed930b96b1cae90600412e)/linux-orangepi-3495b5ee0594566c9fed930b96b1cae90600412e.tar.gz"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="linux_sunxi64"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h616-orangepi-zero3"
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero3/linux.config"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3"
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_ROOTFS_EXT2_SIZE="180M"
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
|
||||
# host tools
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
|
||||
# image scripts
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
|
Loading…
Reference in New Issue
Block a user