From 3f7c3c3c25eccb4392a9a9cd26593adcc12f18ae Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Sun, 12 Jun 2016 11:38:04 +0300 Subject: [PATCH] configs: add support for LinkSprite pcDuino Add basic support for LinkSprite pcDuino board series including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi. Tested on pcDuino-Lite-WiFi. Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- board/linksprite/pcduino/boot.cmd | 8 +++ board/linksprite/pcduino/genimage.cfg | 41 +++++++++++++ board/linksprite/pcduino/linux-extras.config | 16 +++++ board/linksprite/pcduino/post-build.sh | 11 ++++ board/linksprite/pcduino/post-image.sh | 16 +++++ board/linksprite/pcduino/readme.txt | 42 +++++++++++++ configs/linksprite_pcduino_defconfig | 62 ++++++++++++++++++++ 7 files changed, 196 insertions(+) create mode 100644 board/linksprite/pcduino/boot.cmd create mode 100644 board/linksprite/pcduino/genimage.cfg create mode 100644 board/linksprite/pcduino/linux-extras.config create mode 100755 board/linksprite/pcduino/post-build.sh create mode 100755 board/linksprite/pcduino/post-image.sh create mode 100644 board/linksprite/pcduino/readme.txt create mode 100644 configs/linksprite_pcduino_defconfig diff --git a/board/linksprite/pcduino/boot.cmd b/board/linksprite/pcduino/boot.cmd new file mode 100644 index 0000000000..0db8363599 --- /dev/null +++ b/board/linksprite/pcduino/boot.cmd @@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 console=tty1 earlyprintk root=/dev/mmcblk0p2 rootwait panic=10 ${extra} + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun4i-a10-pcduino.dtb + +bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/linksprite/pcduino/genimage.cfg b/board/linksprite/pcduino/genimage.cfg new file mode 100644 index 0000000000..0ff043415c --- /dev/null +++ b/board/linksprite/pcduino/genimage.cfg @@ -0,0 +1,41 @@ +# +# Minimal SD card image for the pcDuino +# + +image boot.vfat { + vfat { + files = { + "zImage", + "sun4i-a10-pcduino.dtb", + "boot.scr" + } + } + size = 16M +} + +# +# Note: u-boot environment is stored between u-boot and boot partitions +# + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 1M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/linksprite/pcduino/linux-extras.config b/board/linksprite/pcduino/linux-extras.config new file mode 100644 index 0000000000..670f83fa61 --- /dev/null +++ b/board/linksprite/pcduino/linux-extras.config @@ -0,0 +1,16 @@ +# spidev +CONFIG_SPI_SPIDEV=y + +# wireless core +CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=m + +# wireless drivers +CONFIG_WLAN=y +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_USB=m +CONFIG_RTLWIFI_DEBUG=y +CONFIG_RTL8192C_COMMON=m diff --git a/board/linksprite/pcduino/post-build.sh b/board/linksprite/pcduino/post-build.sh new file mode 100755 index 0000000000..268c107193 --- /dev/null +++ b/board/linksprite/pcduino/post-build.sh @@ -0,0 +1,11 @@ +#!/bin/sh +# post-build.sh for pcDuino taken from OrangePi post-build.sh +# 2013, Carlo Caione + +BOARD_DIR="$(dirname $0)" +MKIMAGE=$HOST_DIR/usr/bin/mkimage +BOOT_CMD=$BOARD_DIR/boot.cmd +BOOT_CMD_H=$BINARIES_DIR/boot.scr + +# U-Boot script +$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H diff --git a/board/linksprite/pcduino/post-image.sh b/board/linksprite/pcduino/post-image.sh new file mode 100755 index 0000000000..c82b189f9c --- /dev/null +++ b/board/linksprite/pcduino/post-image.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + +exit $? diff --git a/board/linksprite/pcduino/readme.txt b/board/linksprite/pcduino/readme.txt new file mode 100644 index 0000000000..08f380fbcb --- /dev/null +++ b/board/linksprite/pcduino/readme.txt @@ -0,0 +1,42 @@ +pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino) + +Intro +===== + +This default configuration will allow you to start experimenting +with the buildroot environment for the LinkSprite pcDuino v1 board +including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the +current configuration it will bring-up the board and allow access +through the serial console as well as ethernet and wireless +network interfaces. + +How to build it +=============== + +Configure Buildroot: + + $ make linksprite_pcduino_defconfig + +Modify configuration if needed, e.g. add more packages to target: + + $ make menuconfig + +Compile everything and build the SD card image: + + $ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image +called "sdcard.img" in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + +How to boot new image +===================== + +Insert SD card and reset the board. By default pcDuino board +boots from SD card. diff --git a/configs/linksprite_pcduino_defconfig b/configs/linksprite_pcduino_defconfig new file mode 100644 index 0000000000..45de3c1bb1 --- /dev/null +++ b/configs/linksprite_pcduino_defconfig @@ -0,0 +1,62 @@ +# Architecture +BR2_arm=y +BR2_cortex_a8=y + +# System settings +BR2_TARGET_GENERIC_HOSTNAME="pcduino" +BR2_TARGET_GENERIC_ISSUE="pcDuino buildroot is ready" + +# Serial port config +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# SD image scripts +BR2_ROOTFS_POST_BUILD_SCRIPT="board/linksprite/pcduino/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/linksprite/pcduino/post-image.sh" + +# For kernel modules autoloading +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y + +# Linux headers same as kernel, a 4.6 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun4i-a10-pcduino" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/linksprite/pcduino/linux-extras.config" + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y + +# U-Boot +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05" +BR2_TARGET_UBOOT_USE_DEFCONFIG=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Linksprite_pcDuino" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" + +# Host packages +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y + +# Target packages: wireless support for pcduino-lite-wifi +BR2_PACKAGE_IW=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y +BR2_PACKAGE_LINUX_FIRMWARE=y +BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y