Add support for the Calao-systems TNY-A9G20-LPW
[Peter: lock kernel/headers version to 3.9.4, use devtmpfs, add comments] Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit is contained in:
Gregory Hermant
Peter Korsgaard
parent
1ba51d2fbd
commit
3e681d9465
551
board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch
Normal file
551
board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch
Normal file
@ -0,0 +1,551 @@
|
||||
From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
|
||||
From: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
Date: Mon, 13 Aug 2012 11:26:10 +0200
|
||||
Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
|
||||
|
||||
|
||||
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
|
||||
---
|
||||
board/tny_a9g20_lpw/nandflash/Makefile | 121 ++++++++++++
|
||||
board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h | 114 ++++++++++++
|
||||
board/tny_a9g20_lpw/tny_a9g20_lpw.c | 243 +++++++++++++++++++++++++
|
||||
crt0_gnu.S | 6 +
|
||||
include/part.h | 6 +-
|
||||
5 files changed, 489 insertions(+), 1 deletion(-)
|
||||
create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
|
||||
create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
|
||||
diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
|
||||
new file mode 100644
|
||||
index 0000000..7efbea7
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/nandflash/Makefile
|
||||
@@ -0,0 +1,121 @@
|
||||
+# TODO: set this appropriately for your local toolchain
|
||||
+ifndef ERASE_FCT
|
||||
+ERASE_FCT=rm -f
|
||||
+endif
|
||||
+ifndef CROSS_COMPILE
|
||||
+CROSS_COMPILE=arm-elf-
|
||||
+endif
|
||||
+
|
||||
+TOOLCHAIN=gcc
|
||||
+
|
||||
+BOOTSTRAP_PATH=../../..
|
||||
+
|
||||
+# NandFlashBoot Configuration for AT91SAM9260EK
|
||||
+
|
||||
+# Target name (case sensitive!!!)
|
||||
+TARGET=AT91SAM9G20
|
||||
+# Board name (case sensitive!!!)
|
||||
+BOARD=tny_a9g20_lpw
|
||||
+# Link Address and Top_of_Memory
|
||||
+LINK_ADDR=0x200000
|
||||
+TOP_OF_MEMORY=0x301000
|
||||
+# Name of current directory
|
||||
+PROJECT=nandflash
|
||||
+
|
||||
+ifndef BOOT_NAME
|
||||
+BOOT_NAME=$(PROJECT)_$(BOARD)
|
||||
+endif
|
||||
+
|
||||
+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+
|
||||
+AS=$(CROSS_COMPILE)gcc
|
||||
+CC=$(CROSS_COMPILE)gcc
|
||||
+LD=$(CROSS_COMPILE)gcc
|
||||
+NM= $(CROSS_COMPILE)nm
|
||||
+SIZE=$(CROSS_COMPILE)size
|
||||
+OBJCOPY=$(CROSS_COMPILE)objcopy
|
||||
+OBJDUMP=$(CROSS_COMPILE)objdump
|
||||
+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
|
||||
+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
|
||||
+
|
||||
+# Linker flags.
|
||||
+# -Wl,...: tell GCC to pass this to linker.
|
||||
+# -Map: create map file
|
||||
+# --cref: add cross reference to map file
|
||||
+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
|
||||
+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
|
||||
+OBJS=crt0_gnu.o
|
||||
+
|
||||
+endif
|
||||
+
|
||||
+OBJS+=\
|
||||
+ $(BOARD).o \
|
||||
+ main.o \
|
||||
+ gpio.o \
|
||||
+ pmc.o \
|
||||
+ debug.o \
|
||||
+ sdramc.o \
|
||||
+ nandflash.o \
|
||||
+ _udivsi3.o \
|
||||
+ _umodsi3.o \
|
||||
+ div0.o \
|
||||
+ udiv.o \
|
||||
+ string.o
|
||||
+
|
||||
+rebuild: clean all
|
||||
+
|
||||
+all: $(BOOT_NAME)
|
||||
+
|
||||
+ifeq ($(TOOLCHAIN), gcc)
|
||||
+$(BOOT_NAME): $(OBJS)
|
||||
+ $(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
|
||||
+ $(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
|
||||
+endif
|
||||
+
|
||||
+
|
||||
+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
|
||||
+
|
||||
+main.o: $(BOOTSTRAP_PATH)/main.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
|
||||
+
|
||||
+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
|
||||
+
|
||||
+pmc.o: $(BOOTSTRAP_PATH)/driver/pmc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
|
||||
+
|
||||
+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
|
||||
+
|
||||
+sdramc.o: $(BOOTSTRAP_PATH)/driver/sdramc.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
|
||||
+
|
||||
+dataflash.o: $(BOOTSTRAP_PATH)/driver/dataflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
|
||||
+
|
||||
+nandflash.o: $(BOOTSTRAP_PATH)/driver/nandflash.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
|
||||
+
|
||||
+crt0_gnu.o: $(BOOTSTRAP_PATH)/crt0_gnu.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
|
||||
+
|
||||
+div0.o: $(BOOTSTRAP_PATH)/lib/div0.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
|
||||
+
|
||||
+string.o: $(BOOTSTRAP_PATH)/lib/string.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
|
||||
+
|
||||
+udiv.o: $(BOOTSTRAP_PATH)/lib/udiv.c
|
||||
+ $(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
|
||||
+
|
||||
+_udivsi3.o: $(BOOTSTRAP_PATH)/lib/_udivsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
|
||||
+
|
||||
+_umodsi3.o: $(BOOTSTRAP_PATH)/lib/_umodsi3.S
|
||||
+ $(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
|
||||
+
|
||||
+clean:
|
||||
+ $(ERASE_FCT) *.o *.bin *.elf *.map
|
||||
diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
new file mode 100644
|
||||
index 0000000..b1f8a1d
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
|
||||
@@ -0,0 +1,114 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : tny-a9g20-lpw.h
|
||||
+ * Object :
|
||||
+ * Creation : GH August 13th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#ifndef _TNY_A9G20_LPW_H
|
||||
+#define _TNY_A9G20_LPW_H
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* PMC Settings */
|
||||
+/* */
|
||||
+/* The main oscillator is enabled as soon as possible in the c_startup */
|
||||
+/* and MCK is switched on the main oscillator. */
|
||||
+/* PLL initialization is done later in the hw_init() function */
|
||||
+/* ******************************************************************* */
|
||||
+#define MASTER_CLOCK (100000000)
|
||||
+#define PLL_LOCK_TIMEOUT 1000000
|
||||
+
|
||||
+/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
|
||||
+#define PLLA_SETTINGS 0x20C73F03
|
||||
+#define PLLB_SETTINGS 0x100F3F02
|
||||
+
|
||||
+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
|
||||
+/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
|
||||
+/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
|
||||
+/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
|
||||
+#define MCKR_SETTINGS 0x0204
|
||||
+#define MCKR_CSS_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* NandFlash Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define AT91C_SMARTMEDIA_BASE 0x40000000
|
||||
+
|
||||
+#define AT91_SMART_MEDIA_ALE (1 << 21) /* our ALE is AD21 */
|
||||
+#define AT91_SMART_MEDIA_CLE (1 << 22) /* our CLE is AD22 */
|
||||
+
|
||||
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
|
||||
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
|
||||
+
|
||||
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
|
||||
+
|
||||
+
|
||||
+/* ******************************************************************** */
|
||||
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
|
||||
+/* Please refer to SMC section in AT91SAM9 datasheet to learn how */
|
||||
+/* to generate these values. */
|
||||
+/* ******************************************************************** */
|
||||
+#define AT91C_SM_NWE_SETUP (1 << 0)
|
||||
+#define AT91C_SM_NCS_WR_SETUP (0 << 8)
|
||||
+#define AT91C_SM_NRD_SETUP (1 << 16)
|
||||
+#define AT91C_SM_NCS_RD_SETUP (0 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_PULSE (3 << 0)
|
||||
+#define AT91C_SM_NCS_WR_PULSE (3 << 8)
|
||||
+#define AT91C_SM_NRD_PULSE (3 << 16)
|
||||
+#define AT91C_SM_NCS_RD_PULSE (3 << 24)
|
||||
+
|
||||
+#define AT91C_SM_NWE_CYCLE (5 << 0)
|
||||
+#define AT91C_SM_NRD_CYCLE (5 << 16)
|
||||
+
|
||||
+#define AT91C_SM_TDF (2 << 16)
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* BootStrap Settings */
|
||||
+/* */
|
||||
+/* ******************************************************************* */
|
||||
+#define IMG_ADDRESS 0x20000 /* Image Address in NandFlash */
|
||||
+#define IMG_SIZE 0x40000 /* Image Size in NandFlash */
|
||||
+
|
||||
+#define MACH_TYPE 0x80B /* TNY-A9G20 */
|
||||
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
|
||||
+
|
||||
+/* ******************************************************************* */
|
||||
+/* Application Settings */
|
||||
+/* ******************************************************************* */
|
||||
+#undef CFG_DEBUG
|
||||
+#undef CFG_DATAFLASH
|
||||
+
|
||||
+#define CFG_NANDFLASH
|
||||
+#undef NANDFLASH_SMALL_BLOCKS /* NANDFLASH_LARGE_BLOCKS used instead */
|
||||
+
|
||||
+#define CFG_SDRAM
|
||||
+#define CFG_HW_INIT
|
||||
+
|
||||
+#endif /* _TNY_A9G20_LPW_H */
|
||||
diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
new file mode 100644
|
||||
index 0000000..cef9055
|
||||
--- /dev/null
|
||||
+++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
|
||||
@@ -0,0 +1,243 @@
|
||||
+/* ----------------------------------------------------------------------------
|
||||
+ * ATMEL Microcontroller Software Support - ROUSSET -
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * Copyright (c) 2008, Atmel Corporation
|
||||
+
|
||||
+ * All rights reserved.
|
||||
+ *
|
||||
+ * Redistribution and use in source and binary forms, with or without
|
||||
+ * modification, are permitted provided that the following conditions are met:
|
||||
+ *
|
||||
+ * - Redistributions of source code must retain the above copyright notice,
|
||||
+ * this list of conditions and the disclaimer below.
|
||||
+ *
|
||||
+ * Atmel's name may not be used to endorse or promote products derived from
|
||||
+ * this software without specific prior written permission.
|
||||
+ *
|
||||
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ * ----------------------------------------------------------------------------
|
||||
+ * File Name : tny_a9g20_lpw.c
|
||||
+ * Object :
|
||||
+ * Creation : GH August 13th 2012
|
||||
+ *-----------------------------------------------------------------------------
|
||||
+ */
|
||||
+#include "../../include/part.h"
|
||||
+#include "../../include/gpio.h"
|
||||
+#include "../../include/pmc.h"
|
||||
+#include "../../include/debug.h"
|
||||
+#include "../../include/sdramc.h"
|
||||
+#include "../../include/main.h"
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+#include "../../include/nandflash.h"
|
||||
+#endif
|
||||
+
|
||||
+static inline unsigned int get_cp15(void)
|
||||
+{
|
||||
+ unsigned int value;
|
||||
+ __asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
|
||||
+ return value;
|
||||
+}
|
||||
+
|
||||
+static inline void set_cp15(unsigned int value)
|
||||
+{
|
||||
+ __asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
|
||||
+}
|
||||
+
|
||||
+#ifdef CFG_HW_INIT
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+/* \fn hw_init */
|
||||
+/* \brief This function performs very low level HW initialization */
|
||||
+/* This function is invoked as soon as possible during the c_startup */
|
||||
+/* The bss segment must be initialized */
|
||||
+/*----------------------------------------------------------------------------*/
|
||||
+void hw_init(void)
|
||||
+{
|
||||
+ unsigned int cp15;
|
||||
+
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc hw_pio[] = {
|
||||
+#ifdef CFG_DEBUG
|
||||
+ {"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+#endif
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Disable watchdog */
|
||||
+ writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
|
||||
+
|
||||
+ /* At this stage the main oscillator is supposed to be enabled
|
||||
+ * PCK = MCK = MOSC */
|
||||
+ writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
|
||||
+
|
||||
+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
|
||||
+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* PCK = PLLA/2 = 3 * MCK */
|
||||
+ pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+ /* Switch MCK on PLLA output */
|
||||
+ pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure PLLB */
|
||||
+ pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
|
||||
+
|
||||
+ /* Configure CP15 */
|
||||
+ cp15 = get_cp15();
|
||||
+ cp15 |= I_CACHE;
|
||||
+ set_cp15(cp15);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ pio_setup(hw_pio);
|
||||
+
|
||||
+ /* Configure the EBI Slave Slot Cycle to 64 */
|
||||
+ writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
|
||||
+
|
||||
+#ifdef CFG_DEBUG
|
||||
+ /* Enable Debug messages on the DBGU */
|
||||
+ dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
|
||||
+
|
||||
+ dbg_print("Start AT91Bootstrap...\n\r");
|
||||
+#endif /* CFG_DEBUG */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+ /* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
|
||||
+ writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SDRAM Controller */
|
||||
+ sdram_init( AT91C_SDRAMC_NC_9 |
|
||||
+ AT91C_SDRAMC_NR_13 |
|
||||
+ AT91C_SDRAMC_CAS_3 |
|
||||
+ AT91C_SDRAMC_NB_4_BANKS |
|
||||
+ AT91C_SDRAMC_DBW_32_BITS |
|
||||
+ AT91C_SDRAMC_TWR_2 |
|
||||
+ AT91C_SDRAMC_TRC_7 |
|
||||
+ AT91C_SDRAMC_TRP_2 |
|
||||
+ AT91C_SDRAMC_TRCD_2 |
|
||||
+ AT91C_SDRAMC_TRAS_5 |
|
||||
+ AT91C_SDRAMC_TXSR_8, /* Control Register */
|
||||
+ (MASTER_CLOCK * 7)/1000000, /* Refresh Timer Register */
|
||||
+ AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power) */
|
||||
+
|
||||
+#endif /* CFG_SDRAM */
|
||||
+}
|
||||
+#endif /* CFG_HW_INIT */
|
||||
+
|
||||
+#ifdef CFG_SDRAM
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn sdramc_hw_init */
|
||||
+/* \brief This function performs SDRAMC HW initialization */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void sdramc_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+/* const struct pio_desc sdramc_pio[] = {
|
||||
+ {"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+*/
|
||||
+ /* Configure the SDRAMC PIO controller to output PCK0 */
|
||||
+/* pio_setup(sdramc_pio); */
|
||||
+
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
|
||||
+ writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
|
||||
+
|
||||
+}
|
||||
+#endif /* CFG_SDRAM */
|
||||
+
|
||||
+#ifdef CFG_NANDFLASH
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nand_recovery */
|
||||
+/* \brief This function erases NandFlash Block 0 if BP4 is pressed */
|
||||
+/* during boot sequence */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+static void nand_recovery(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc bp4_pio[] = {
|
||||
+ {"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(bp4_pio);
|
||||
+
|
||||
+ /* If BP4 is pressed during Boot sequence */
|
||||
+ /* Erase NandFlash block 0*/
|
||||
+ if (!pio_get_value(AT91C_PIN_PA(31)) )
|
||||
+ AT91F_NandEraseBlock0();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_hw_init */
|
||||
+/* \brief NandFlash HW init */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_hw_init(void)
|
||||
+{
|
||||
+ /* Configure PIOs */
|
||||
+ const struct pio_desc nand_pio[] = {
|
||||
+ {"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
|
||||
+ {"NANDCS", AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
|
||||
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
|
||||
+ };
|
||||
+
|
||||
+ /* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
|
||||
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
|
||||
+
|
||||
+ /* Configure SMC CS3 */
|
||||
+ writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
|
||||
+ writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
|
||||
+ writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE) , AT91C_BASE_SMC + SMC_CYCLE3);
|
||||
+ writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE |
|
||||
+ AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF) , AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+
|
||||
+ /* Configure the PIO controller */
|
||||
+ writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
|
||||
+ pio_setup(nand_pio);
|
||||
+
|
||||
+ nand_recovery();
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_16bits_dbw_init */
|
||||
+/* \brief Configure SMC in 16 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_16bits_dbw_init(void)
|
||||
+{
|
||||
+ writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+/* \fn nandflash_cfg_8bits_dbw_init */
|
||||
+/* \brief Configure SMC in 8 bits mode */
|
||||
+/*------------------------------------------------------------------------------*/
|
||||
+void nandflash_cfg_8bits_dbw_init(void)
|
||||
+{
|
||||
+ writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
|
||||
+}
|
||||
+
|
||||
+#endif /* #ifdef CFG_NANDFLASH */
|
||||
diff --git a/crt0_gnu.S b/crt0_gnu.S
|
||||
index 042b617..c6cd49d 100644
|
||||
--- a/crt0_gnu.S
|
||||
+++ b/crt0_gnu.S
|
||||
@@ -106,6 +106,12 @@ _relocate_to_sram:
|
||||
#endif /* CFG_NORFLASH */
|
||||
|
||||
_setup_clocks:
|
||||
+/* Test if main osc is bypassed */
|
||||
+ ldr r0,=AT91C_PMC_MOR
|
||||
+ ldr r1, [r0]
|
||||
+ ldr r2,=AT91C_CKGR_OSCBYPASS
|
||||
+ ands r1, r1, r2
|
||||
+ bne _init_data /* branch if OSCBYPASS=1 */
|
||||
/* Test if main oscillator is enabled */
|
||||
ldr r0,=AT91C_PMC_SR
|
||||
ldr r1, [r0]
|
||||
diff --git a/include/part.h b/include/part.h
|
||||
index ba5985a..ab79af1 100644
|
||||
--- a/include/part.h
|
||||
+++ b/include/part.h
|
||||
@@ -46,7 +46,11 @@
|
||||
|
||||
#ifdef AT91SAM9G20
|
||||
#include "AT91SAM9260_inc.h"
|
||||
-#include "at91sam9g20ek.h"
|
||||
+ #ifdef at91sam9g20ek
|
||||
+ #include "at91sam9g20ek.h"
|
||||
+ #elif tny_a9g20_lpw
|
||||
+ #include "tny-a9g20-lpw.h"
|
||||
+ #endif
|
||||
#endif
|
||||
|
||||
#ifdef AT91SAM9261
|
||||
--
|
||||
1.7.9.5
|
||||
|
||||
187
board/calao/tny-a9g20-lpw/linux-3.9.config
Normal file
187
board/calao/tny-a9g20-lpw/linux-3.9.config
Normal file
@ -0,0 +1,187 @@
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_LBDAF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SOC_AT91SAM9260=y
|
||||
CONFIG_SOC_AT91SAM9263=y
|
||||
CONFIG_SOC_AT91SAM9G45=y
|
||||
CONFIG_SOC_AT91SAM9X5=y
|
||||
CONFIG_SOC_AT91SAM9N12=y
|
||||
CONFIG_MACH_AT91SAM_DT=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AT91_TIMER_HZ=128
|
||||
CONFIG_AEABI=y
|
||||
# CONFIG_OABI_COMPAT is not set
|
||||
CONFIG_UACCESS_WITH_MEMCPY=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
CONFIG_IPV6=y
|
||||
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
||||
CONFIG_IPV6_SIT_6RD=y
|
||||
# CONFIG_WIRELESS is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=4
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_PWM=y
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_EEPROM_93CX6=m
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MACB=y
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
# CONFIG_WLAN is not set
|
||||
CONFIG_INPUT_POLLDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
|
||||
CONFIG_INPUT_JOYDEV=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_LEGACY_PTY_COUNT=4
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
CONFIG_SSB=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_ATMEL=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_ATMEL_LCDC=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_ACORN_8x8=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_AT91=m
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_CDC_COMPOSITE=m
|
||||
CONFIG_USB_G_ACM_MS=m
|
||||
CONFIG_USB_G_MULTI=m
|
||||
CONFIG_USB_G_MULTI_CDC=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ATMELMCI=y
|
||||
CONFIG_MMC_SPI=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_DMADEVICES=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_STRIP_ASM_SYMS=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_ARC4=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRYPTO_USER_API_HASH=m
|
||||
CONFIG_CRYPTO_USER_API_SKCIPHER=m
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_CRC_CCITT=m
|
||||
CONFIG_AVERAGE=y
|
||||
32
configs/calao_tny_a9g20_lpw_defconfig
Normal file
32
configs/calao_tny_a9g20_lpw_defconfig
Normal file
@ -0,0 +1,32 @@
|
||||
# architecture
|
||||
BR2_arm=y
|
||||
BR2_arm926t=y
|
||||
|
||||
# system
|
||||
BR2_PACKAGE_HOST_SAM_BA=y
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
|
||||
|
||||
# filesystem
|
||||
BR2_TARGET_ROOTFS_UBIFS=y
|
||||
|
||||
# lock down headers to avoid breaking with new defaults
|
||||
BR2_KERNEL_HEADERS_VERSION=y
|
||||
BR2_DEFAULT_KERNEL_VERSION="3.9.4"
|
||||
|
||||
# bootloaders
|
||||
BR2_TARGET_AT91BOOTSTRAP=y
|
||||
BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR="board/calao/tny-a9g20-lpw/"
|
||||
BR2_TARGET_AT91BOOTSTRAP_BOARD="tny_a9g20_lpw"
|
||||
BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
|
||||
BR2_TARGET_BAREBOX=y
|
||||
BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="tny_a9g20"
|
||||
|
||||
# linux
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.4"
|
||||
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/tny-a9g20-lpw/linux-3.9.config"
|
||||
BR2_LINUX_KERNEL_ZIMAGE=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="tny_a9g20"
|
||||
Loading…
Reference in New Issue
Block a user