Add Gnublin board support with fixed kernel header version
[Peter: misc white space fixup] Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit is contained in:
parent
381c4646c5
commit
19a537fef7
48
board/gnublin/README
Normal file
48
board/gnublin/README
Normal file
@ -0,0 +1,48 @@
|
||||
This the Buildroot support for the LPC3131 based Gnublin board (see here:
|
||||
http://en.gnublin.org/) and to the Elektor Linux board
|
||||
(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.
|
||||
lynkx)
|
||||
|
||||
Unfortunately currently the AD and the pwm modules are not supported, i'm about
|
||||
to add also those drivers as well to the current kernel later.
|
||||
|
||||
Base kernel version: 3.7 (available here:
|
||||
https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-
|
||||
support)
|
||||
|
||||
U-boot version: 2009.11 (available here:
|
||||
https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
|
||||
|
||||
|
||||
Steps to create a bootable SD card (with the given config you need an at least
|
||||
500 MB SD card):
|
||||
|
||||
1.Config buildroot with the gnublin_defconfig:
|
||||
|
||||
$ make gnublin_defconfig
|
||||
|
||||
2.Tweak the config for your needs:
|
||||
|
||||
$ make menuconfig
|
||||
|
||||
3.Build:
|
||||
|
||||
$ make
|
||||
|
||||
4.Create two partitions on your SD card, one with type of BootIt (fdisk ID: df),
|
||||
the size should be around 1M, and another partition with all of the left space
|
||||
on the card, and with the type of normal DOS partition.
|
||||
|
||||
5.From the output/images directory dump the u-boot image to the BootIt partition
|
||||
(probably you have to modify the output /dev files according to your system):
|
||||
|
||||
$ dd if=output/images/u-boot.bin of=/dev/sdc1
|
||||
|
||||
6.Dump the root fs image as well:
|
||||
|
||||
$ dd if=output/images/rootfs.ext2 of=/dev/sdc2
|
||||
|
||||
7.Insert the SD card into the board's slot, and your board should boot up with
|
||||
your newly created system.
|
||||
|
||||
Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com
|
27
configs/gnublin_defconfig
Normal file
27
configs/gnublin_defconfig
Normal file
@ -0,0 +1,27 @@
|
||||
# Architecture
|
||||
BR2_arm=y
|
||||
BR2_arm926t=y
|
||||
|
||||
# System
|
||||
BR2_KERNEL_HEADERS_VERSION=y
|
||||
BR2_DEFAULT_KERNEL_VERSION="3.7"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Gnublin"
|
||||
|
||||
# Filesystem
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_BLOCKS=475000
|
||||
|
||||
# Bootloader
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BOARDNAME="GNUBLIN"
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="2009.11_gnublin_support_v2"
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="v3.7-gnublin-2"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="gnublin"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
Loading…
Reference in New Issue
Block a user