55 lines
1.2 KiB
Plaintext
55 lines
1.2 KiB
Plaintext
|
******************************************
|
||
|
|
Xilinx VCK190 board - Versal
|
||
|
|
******************************************
|
||
|
|
|
||
|
|
This document describes the Buildroot support for the VCK190
|
||
|
|
board by Xilinx, based on Versal. It has been tested with the
|
||
|
|
VCK190 production board.
|
||
|
|
|
||
|
|
Evaluation board features can be found here with the link below.
|
||
|
|
|
||
|
|
VCK190:
|
||
|
|
https://www.xilinx.com/products/boards-and-kits/vck190.html
|
||
|
|
|
||
|
|
|
||
|
|
How to build it
|
||
|
|
===============
|
||
|
|
|
||
|
|
Configure Buildroot:
|
||
|
|
|
||
|
|
$ make versal_vck190_defconfig
|
||
|
|
|
||
|
|
Compile everything and build the rootfs image:
|
||
|
|
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Result of the build
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
After building, you should get a tree like this:
|
||
|
|
|
||
|
|
output/images/
|
||
|
|
+-- boot.bin
|
||
|
|
+-- boot.vfat
|
||
|
|
+-- Image
|
||
|
|
+-- rootfs.ext2
|
||
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
||
|
|
+-- sdcard.img
|
||
|
|
+-- system.dtb -> versal-vck190-rev1.1.dtb
|
||
|
|
`-- versal-vck190-rev1.1.dtb
|
||
|
|
|
||
|
|
How to write the SD card
|
||
|
|
========================
|
||
|
|
|
||
|
|
WARNING! This will destroy all the card content. Use with care!
|
||
|
|
|
||
|
|
The sdcard.img file is a complete bootable image ready to be written
|
||
|
|
on the boot medium. To install it, simply copy the image to an SD
|
||
|
|
card:
|
||
|
|
|
||
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
||
|
|
|
||
|
|
Where 'sdX' is the device node of the SD.
|
||
|
|
|
||
|
|
Eject the SD card, insert it in the board, and power it up.
|