2013-06-07 12:13:46 +02:00
|
|
|
################################################################################
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
#
|
2011-07-11 22:46:07 +02:00
|
|
|
# Linux kernel target
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
#
|
2013-06-07 12:13:46 +02:00
|
|
|
################################################################################
|
2013-06-06 01:53:25 +02:00
|
|
|
|
2013-07-20 08:52:43 +02:00
|
|
|
LINUX_VERSION = $(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
|
2012-05-17 19:33:09 +02:00
|
|
|
LINUX_LICENSE = GPLv2
|
|
|
|
|
LINUX_LICENSE_FILES = COPYING
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2011-07-11 22:46:07 +02:00
|
|
|
# Compute LINUX_SOURCE and LINUX_SITE from the configuration
|
|
|
|
|
ifeq ($(LINUX_VERSION),custom)
|
2011-07-11 22:46:08 +02:00
|
|
|
LINUX_TARBALL = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
|
2013-01-09 13:12:44 +01:00
|
|
|
LINUX_SITE = $(patsubst %/,%,$(dir $(LINUX_TARBALL)))
|
2011-07-11 22:46:08 +02:00
|
|
|
LINUX_SOURCE = $(notdir $(LINUX_TARBALL))
|
2011-07-11 22:46:11 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_GIT),y)
|
2013-09-02 22:07:54 +02:00
|
|
|
LINUX_SITE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_REPO_URL))
|
2011-07-11 22:46:11 +02:00
|
|
|
LINUX_SITE_METHOD = git
|
2013-09-02 22:07:54 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_HG),y)
|
|
|
|
|
LINUX_SITE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_REPO_URL))
|
|
|
|
|
LINUX_SITE_METHOD = hg
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
else
|
2013-05-11 03:40:36 +02:00
|
|
|
LINUX_SOURCE = linux-$(LINUX_VERSION).tar.xz
|
2011-07-11 22:46:16 +02:00
|
|
|
# In X.Y.Z, get X and Y. We replace dots and dashes by spaces in order
|
|
|
|
|
# to use the $(word) function. We support versions such as 3.1,
|
|
|
|
|
# 2.6.32, 2.6.32-rc1, 3.0-rc6, etc.
|
2011-10-24 16:54:03 +02:00
|
|
|
ifeq ($(findstring x2.6.,x$(LINUX_VERSION)),x2.6.)
|
|
|
|
|
LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/v2.6/
|
|
|
|
|
else
|
|
|
|
|
LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/v3.x/
|
|
|
|
|
endif
|
2011-07-11 22:46:16 +02:00
|
|
|
# release candidates are in testing/ subdir
|
|
|
|
|
ifneq ($(findstring -rc,$(LINUX_VERSION)),)
|
2011-07-14 16:38:07 +02:00
|
|
|
LINUX_SITE := $(LINUX_SITE)testing/
|
2011-07-11 22:46:16 +02:00
|
|
|
endif # -rc
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
endif
|
|
|
|
|
|
2011-07-11 22:46:08 +02:00
|
|
|
LINUX_PATCHES = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
|
|
|
|
|
|
|
|
|
|
LINUX_INSTALL_IMAGES = YES
|
2013-08-27 19:28:33 +02:00
|
|
|
LINUX_DEPENDENCIES += host-kmod host-lzop
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2012-07-30 14:32:46 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_UBOOT_IMAGE),y)
|
|
|
|
|
LINUX_DEPENDENCIES += host-uboot-tools
|
|
|
|
|
endif
|
|
|
|
|
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_MAKE_FLAGS = \
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
HOSTCC="$(HOSTCC)" \
|
|
|
|
|
HOSTCFLAGS="$(HOSTCFLAGS)" \
|
|
|
|
|
ARCH=$(KERNEL_ARCH) \
|
|
|
|
|
INSTALL_MOD_PATH=$(TARGET_DIR) \
|
2011-02-01 18:13:00 +01:00
|
|
|
CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
|
2013-09-10 21:54:59 +02:00
|
|
|
DEPMOD=$(HOST_DIR)/sbin/depmod
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
|
|
|
|
# Get the real Linux version, which tells us where kernel modules are
|
|
|
|
|
# going to be installed in the target filesystem.
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_VERSION_PROBED = $(shell $(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease)
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2012-07-30 14:32:45 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_USE_INTREE_DTS),y)
|
2012-12-21 08:39:14 +01:00
|
|
|
KERNEL_DTS_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_INTREE_DTS_NAME))
|
2012-07-30 14:32:45 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),y)
|
2013-06-05 08:21:09 +02:00
|
|
|
KERNEL_DTS_NAME = $(basename $(notdir $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH))))
|
2012-07-30 14:32:45 +02:00
|
|
|
endif
|
|
|
|
|
|
2013-04-15 08:55:53 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT)$(KERNEL_DTS_NAME),y)
|
|
|
|
|
$(error No kernel device tree source specified, check your \
|
|
|
|
|
BR2_LINUX_KERNEL_USE_INTREE_DTS / BR2_LINUX_KERNEL_USE_CUSTOM_DTS settings)
|
|
|
|
|
endif
|
|
|
|
|
|
2012-07-30 14:32:47 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
|
|
|
|
|
ifneq ($(words $(KERNEL_DTS_NAME)),1)
|
|
|
|
|
$(error Kernel with appended device tree needs exactly one DTS source.\
|
|
|
|
|
Check BR2_LINUX_KERNEL_INTREE_DTS_NAME or BR2_LINUX_KERNEL_CUSTOM_DTS_PATH.)
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
2012-12-21 08:39:14 +01:00
|
|
|
KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
|
|
|
|
|
|
2011-03-21 18:39:43 +01:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=$(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
|
2011-03-21 18:39:43 +01:00
|
|
|
else
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=uImage
|
2012-07-30 14:32:47 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
|
|
|
|
|
LINUX_IMAGE_NAME=uImage
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=bzImage
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=zImage
|
2012-07-30 14:32:47 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_APPENDED_ZIMAGE),y)
|
|
|
|
|
LINUX_IMAGE_NAME=zImage
|
2012-07-30 14:32:48 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_CUIMAGE),y)
|
|
|
|
|
LINUX_IMAGE_NAME=cuImage.$(KERNEL_DTS_NAME)
|
|
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
|
|
|
|
|
LINUX_IMAGE_NAME=simpleImage.$(KERNEL_DTS_NAME)
|
|
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_LINUX_BIN),y)
|
|
|
|
|
LINUX_IMAGE_NAME=linux.bin
|
2010-09-01 15:26:24 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX_BIN),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=vmlinux.bin
|
2010-12-05 21:53:23 +01:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_NAME=vmlinux
|
2011-09-20 11:01:26 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
|
|
|
|
|
LINUX_IMAGE_NAME=vmlinuz
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
endif
|
2011-03-21 18:39:43 +01:00
|
|
|
endif
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2013-03-13 12:13:24 +01:00
|
|
|
LINUX_KERNEL_UIMAGE_LOADADDR=$(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
|
|
|
|
|
ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
|
|
|
|
|
LINUX_MAKE_FLAGS+=LOADADDR="$(LINUX_KERNEL_UIMAGE_LOADADDR)"
|
|
|
|
|
endif
|
|
|
|
|
|
2010-12-05 21:53:26 +01:00
|
|
|
# Compute the arch path, since i386 and x86_64 are in arch/x86 and not
|
|
|
|
|
# in arch/$(KERNEL_ARCH). Even if the kernel creates symbolic links
|
|
|
|
|
# for bzImage, arch/i386 and arch/x86_64 do not exist when copying the
|
|
|
|
|
# defconfig file.
|
|
|
|
|
ifeq ($(KERNEL_ARCH),i386)
|
2011-07-11 22:46:07 +02:00
|
|
|
KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/x86
|
2010-12-05 21:53:26 +01:00
|
|
|
else ifeq ($(KERNEL_ARCH),x86_64)
|
2011-07-11 22:46:07 +02:00
|
|
|
KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/x86
|
2010-12-05 21:53:26 +01:00
|
|
|
else
|
2011-07-11 22:46:07 +02:00
|
|
|
KERNEL_ARCH_PATH=$(LINUX_DIR)/arch/$(KERNEL_ARCH)
|
2010-12-05 21:53:26 +01:00
|
|
|
endif
|
|
|
|
|
|
2010-12-05 21:53:23 +01:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_PATH=$(LINUX_DIR)/$(LINUX_IMAGE_NAME)
|
2011-09-20 11:01:26 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
|
|
|
|
|
LINUX_IMAGE_PATH=$(LINUX_DIR)/$(LINUX_IMAGE_NAME)
|
2010-12-05 21:53:23 +01:00
|
|
|
else
|
2010-09-07 15:08:07 +02:00
|
|
|
ifeq ($(KERNEL_ARCH),avr32)
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/images/$(LINUX_IMAGE_NAME)
|
2010-09-07 15:08:07 +02:00
|
|
|
else
|
2011-07-11 22:46:07 +02:00
|
|
|
LINUX_IMAGE_PATH=$(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
|
2010-09-07 15:08:07 +02:00
|
|
|
endif
|
2010-12-05 21:53:23 +01:00
|
|
|
endif # BR2_LINUX_KERNEL_VMLINUX
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2011-07-11 22:46:08 +02:00
|
|
|
define LINUX_DOWNLOAD_PATCHES
|
|
|
|
|
$(if $(LINUX_PATCHES),
|
|
|
|
|
@$(call MESSAGE,"Download additional patches"))
|
|
|
|
|
$(foreach patch,$(filter ftp://% http://%,$(LINUX_PATCHES)),\
|
2012-03-16 14:42:53 +01:00
|
|
|
$(call DOWNLOAD,$(patch))$(sep))
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
LINUX_POST_DOWNLOAD_HOOKS += LINUX_DOWNLOAD_PATCHES
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2011-07-11 22:46:08 +02:00
|
|
|
define LINUX_APPLY_PATCHES
|
|
|
|
|
for p in $(LINUX_PATCHES) ; do \
|
2010-12-05 21:53:18 +01:00
|
|
|
if echo $$p | grep -q -E "^ftp://|^http://" ; then \
|
2011-08-31 23:35:04 +02:00
|
|
|
support/scripts/apply-patches.sh $(@D) $(DL_DIR) `basename $$p` ; \
|
2010-12-05 21:53:18 +01:00
|
|
|
elif test -d $$p ; then \
|
2011-08-31 23:35:04 +02:00
|
|
|
support/scripts/apply-patches.sh $(@D) $$p linux-\*.patch ; \
|
2010-12-05 21:53:18 +01:00
|
|
|
else \
|
2011-08-31 23:35:04 +02:00
|
|
|
support/scripts/apply-patches.sh $(@D) `dirname $$p` `basename $$p` ; \
|
2010-12-05 21:53:18 +01:00
|
|
|
fi \
|
|
|
|
|
done
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
LINUX_POST_PATCH_HOOKS += LINUX_APPLY_PATCHES
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
|
2011-07-11 22:46:08 +02:00
|
|
|
KERNEL_SOURCE_CONFIG = $(KERNEL_ARCH_PATH)/configs/$(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
|
2011-07-11 22:46:08 +02:00
|
|
|
KERNEL_SOURCE_CONFIG = $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
define LINUX_CONFIGURE_CMDS
|
|
|
|
|
cp $(KERNEL_SOURCE_CONFIG) $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
|
2011-07-11 22:46:07 +02:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) buildroot_defconfig
|
2010-12-05 21:53:26 +01:00
|
|
|
rm $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig
|
2013-07-14 00:27:30 +02:00
|
|
|
$(if $(BR2_arm)$(BR2_armeb),
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config))
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
# As the kernel gets compiled before root filesystems are
|
2011-09-06 23:16:09 +02:00
|
|
|
# built, we create a fake cpio file. It'll be
|
|
|
|
|
# replaced later by the real cpio archive, and the kernel will be
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
# rebuilt using the linux26-rebuild-with-initramfs target.
|
2011-07-11 22:46:08 +02:00
|
|
|
$(if $(BR2_TARGET_ROOTFS_INITRAMFS),
|
2011-09-06 23:16:09 +02:00
|
|
|
touch $(BINARIES_DIR)/rootfs.cpio
|
2011-07-11 22:46:08 +02:00
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config)
|
2011-09-06 23:16:09 +02:00
|
|
|
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,\"$(BINARIES_DIR)/rootfs.cpio\",$(@D)/.config)
|
2011-07-11 22:46:08 +02:00
|
|
|
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
|
linux: Do not force GZIP initramfs compression
Initramfs compression does not make much sense for the architectures
that support compressed kernel images because in this case the data
would be compressed twice. This will eventually result in a bigger
kernel image and time overhead when uncompressing it.
The only reason to use compressed initramfs is to reduce memory
usage when the kernel prepares rootfs, and both the unpacked
filesystem and initramfs.cpio are present in the memory.
Buildroot attempts to force GZIP compression for initramfs,
however it doesn't always work because initramfs compression mode
depends on RAM disk compression supported by the kernel.
Thus, CONFIG_INITRAMFS_COMPRESSION_GZIP depends on CONFIG_RD_GZIP.
If CONFIG_RD_GZIP is not set, setting GZIP initramfs compression
will have no effect.
Besides, the kernel also supports other compression methods,
like BZIP2, LZMA, XZ and LZO. Forcing the good old GZIP does not
really make much sense any more.
This removes initramfs compression settings from Buildroot,
so that the default value preset in the kernel config is used,
which is CONFIG_INITRAMFS_COMPRESSION_NONE.
If initramfs compression is still needed, it can be set
in the kernel config (using make linux-menuconfig)
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-10-10 01:34:56 +02:00
|
|
|
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config))
|
2011-07-11 22:46:08 +02:00
|
|
|
$(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config)
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.config))
|
|
|
|
|
$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),
|
|
|
|
|
$(call KCONFIG_SET_OPT,CONFIG_UEVENT_HELPER_PATH,\"/sbin/mdev\",$(@D)/.config))
|
2013-12-16 11:53:20 +01:00
|
|
|
$(if $(BR2_PACKAGE_KTAP),
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DEBUG_FS,$(@D)/.config)
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_EVENT_TRACING,$(@D)/.config)
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS,$(@D)/.config)
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_FUNCTION_TRACER,$(@D)/.config))
|
2012-03-23 16:49:53 +01:00
|
|
|
$(if $(BR2_PACKAGE_SYSTEMD),
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_CGROUPS,$(@D)/.config))
|
2012-07-30 14:32:47 +02:00
|
|
|
$(if $(BR2_LINUX_KERNEL_APPENDED_DTB),
|
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_APPENDED_DTB,$(@D)/.config))
|
2011-07-11 22:46:08 +02:00
|
|
|
yes '' | $(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) oldconfig
|
|
|
|
|
endef
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2012-07-30 14:32:45 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT),y)
|
2012-07-30 14:32:47 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT),)
|
2012-07-30 14:32:45 +02:00
|
|
|
define LINUX_BUILD_DTB
|
2012-12-21 08:39:14 +01:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DTBS)
|
2012-07-30 14:32:45 +02:00
|
|
|
endef
|
|
|
|
|
define LINUX_INSTALL_DTB
|
2013-04-14 19:31:30 +02:00
|
|
|
# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
|
2012-12-21 09:07:45 +01:00
|
|
|
cp $(addprefix \
|
|
|
|
|
$(KERNEL_ARCH_PATH)/boot/$(if $(wildcard \
|
|
|
|
|
$(addprefix $(KERNEL_ARCH_PATH)/boot/dts/,$(KERNEL_DTBS))),dts/),$(KERNEL_DTBS)) \
|
2012-12-19 23:48:09 +01:00
|
|
|
$(BINARIES_DIR)/
|
2012-07-30 14:32:45 +02:00
|
|
|
endef
|
2013-02-14 05:27:54 +01:00
|
|
|
define LINUX_INSTALL_DTB_TARGET
|
2013-04-14 19:31:30 +02:00
|
|
|
# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
|
2013-02-14 05:27:54 +01:00
|
|
|
cp $(addprefix \
|
|
|
|
|
$(KERNEL_ARCH_PATH)/boot/$(if $(wildcard \
|
|
|
|
|
$(addprefix $(KERNEL_ARCH_PATH)/boot/dts/,$(KERNEL_DTBS))),dts/),$(KERNEL_DTBS)) \
|
|
|
|
|
$(TARGET_DIR)/boot/
|
|
|
|
|
endef
|
2012-07-30 14:32:45 +02:00
|
|
|
endif
|
2012-07-30 14:32:47 +02:00
|
|
|
endif
|
|
|
|
|
|
2013-01-08 12:23:56 +01:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
|
|
|
|
|
# dtbs moved from arch/$ARCH/boot to arch/$ARCH/boot/dts since 3.8-rc1
|
2012-07-30 14:32:47 +02:00
|
|
|
define LINUX_APPEND_DTB
|
2013-01-08 12:23:56 +01:00
|
|
|
if [ -e $(KERNEL_ARCH_PATH)/boot/$(KERNEL_DTS_NAME).dtb ]; then \
|
|
|
|
|
cat $(KERNEL_ARCH_PATH)/boot/$(KERNEL_DTS_NAME).dtb; \
|
|
|
|
|
else \
|
|
|
|
|
cat $(KERNEL_ARCH_PATH)/boot/dts/$(KERNEL_DTS_NAME).dtb; \
|
|
|
|
|
fi >> $(KERNEL_ARCH_PATH)/boot/zImage
|
2012-07-30 14:32:47 +02:00
|
|
|
endef
|
2013-01-08 12:23:56 +01:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
|
2013-06-07 15:21:43 +02:00
|
|
|
# We need to generate a new u-boot image that takes into
|
|
|
|
|
# account the extra-size added by the device tree at the end
|
|
|
|
|
# of the image. To do so, we first need to retrieve both load
|
|
|
|
|
# address and entry point for the kernel from the already
|
|
|
|
|
# generate uboot image before using mkimage -l.
|
2013-11-07 00:12:35 +01:00
|
|
|
LINUX_APPEND_DTB += $(sep) MKIMAGE_ARGS=`$(MKIMAGE) -l $(LINUX_IMAGE_PATH) |\
|
2013-06-07 15:21:43 +02:00
|
|
|
sed -n -e 's/Image Name:[ ]*\(.*\)/-n \1/p' -e 's/Load Address:/-a/p' -e 's/Entry Point:/-e/p'`; \
|
2013-11-07 00:12:35 +01:00
|
|
|
$(MKIMAGE) -A $(MKIMAGE_ARCH) -O linux \
|
2013-06-07 15:21:43 +02:00
|
|
|
-T kernel -C none $${MKIMAGE_ARGS} \
|
|
|
|
|
-d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);
|
2013-01-08 12:23:56 +01:00
|
|
|
endif
|
2012-07-30 14:32:47 +02:00
|
|
|
endif
|
2012-07-30 14:32:45 +02:00
|
|
|
|
2010-06-13 19:18:34 +02:00
|
|
|
# Compilation. We make sure the kernel gets rebuilt when the
|
|
|
|
|
# configuration has changed.
|
2011-07-11 22:46:08 +02:00
|
|
|
define LINUX_BUILD_CMDS
|
2012-07-30 14:32:45 +02:00
|
|
|
$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
|
|
|
|
|
cp $(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH) $(KERNEL_ARCH_PATH)/boot/dts/)
|
2013-06-07 15:21:43 +02:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
|
2011-07-07 23:40:09 +02:00
|
|
|
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
|
2011-07-11 22:46:07 +02:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
fi
|
2012-07-30 14:32:45 +02:00
|
|
|
$(LINUX_BUILD_DTB)
|
2012-07-30 14:32:47 +02:00
|
|
|
$(LINUX_APPEND_DTB)
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
|
|
|
|
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2011-07-05 21:53:54 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
|
2011-07-11 22:46:08 +02:00
|
|
|
define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
|
2011-07-11 22:46:07 +02:00
|
|
|
install -m 0644 -D $(LINUX_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX_IMAGE_NAME)
|
2013-02-14 05:27:54 +01:00
|
|
|
$(LINUX_INSTALL_DTB_TARGET)
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
2011-07-05 21:53:54 +02:00
|
|
|
endif
|
2011-07-11 22:46:08 +02:00
|
|
|
|
2012-05-15 10:18:25 +02:00
|
|
|
|
|
|
|
|
define LINUX_INSTALL_HOST_TOOLS
|
|
|
|
|
# Installing dtc (device tree compiler) as host tool, if selected
|
|
|
|
|
if grep -q "CONFIG_DTC=y" $(@D)/.config; then \
|
|
|
|
|
$(INSTALL) -D -m 0755 $(@D)/scripts/dtc/dtc $(HOST_DIR)/usr/bin/dtc ; \
|
|
|
|
|
fi
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
|
2011-07-11 22:46:08 +02:00
|
|
|
define LINUX_INSTALL_IMAGES_CMDS
|
2011-07-11 22:46:07 +02:00
|
|
|
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
|
2013-03-28 00:01:15 +01:00
|
|
|
$(LINUX_INSTALL_DTB)
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define LINUX_INSTALL_TARGET_CMDS
|
|
|
|
|
$(LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET)
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
# Install modules and remove symbolic links pointing to build
|
|
|
|
|
# directories, not relevant on the target
|
2011-07-07 23:40:09 +02:00
|
|
|
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
|
2013-09-11 13:21:53 +02:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) modules_install; \
|
2011-07-11 22:46:07 +02:00
|
|
|
rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ; \
|
|
|
|
|
rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ; \
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
fi
|
2012-05-15 10:18:25 +02:00
|
|
|
$(LINUX_INSTALL_HOST_TOOLS)
|
2011-07-11 22:46:08 +02:00
|
|
|
endef
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2013-09-03 10:45:41 +02:00
|
|
|
include $(sort $(wildcard linux/linux-ext-*.mk))
|
2011-09-17 22:22:51 +02:00
|
|
|
|
2012-07-03 00:07:32 +02:00
|
|
|
$(eval $(generic-package))
|
New, simpler, infrastructure for building the Linux kernel
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-03 18:46:46 +02:00
|
|
|
|
2012-05-04 07:40:53 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL),y)
|
|
|
|
|
linux-menuconfig linux-xconfig linux-gconfig linux-nconfig linux26-menuconfig linux26-xconfig linux26-gconfig linux26-nconfig: dirs linux-configure
|
2011-07-11 22:46:07 +02:00
|
|
|
$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
|
2010-12-27 22:50:18 +01:00
|
|
|
$(subst linux-,,$(subst linux26-,,$@))
|
2011-07-11 22:46:08 +02:00
|
|
|
rm -f $(LINUX_DIR)/.stamp_{built,target_installed,images_installed}
|
2010-06-13 19:18:34 +02:00
|
|
|
|
2012-05-04 07:40:53 +02:00
|
|
|
linux-savedefconfig linux26-savedefconfig: dirs linux-configure
|
2011-08-22 21:28:47 +02:00
|
|
|
$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) \
|
|
|
|
|
$(subst linux-,,$(subst linux26-,,$@))
|
|
|
|
|
|
2011-10-14 16:56:56 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
|
2012-05-04 07:40:53 +02:00
|
|
|
linux-update-config linux26-update-config: linux-configure $(LINUX_DIR)/.config
|
2011-10-14 16:56:56 +02:00
|
|
|
cp -f $(LINUX_DIR)/.config $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
|
|
|
|
|
|
|
|
|
|
linux-update-defconfig linux26-update-defconfig: linux-savedefconfig
|
|
|
|
|
cp -f $(LINUX_DIR)/defconfig $(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)
|
|
|
|
|
else
|
|
|
|
|
linux-update-config linux26-update-config: ;
|
|
|
|
|
linux-update-defconfig linux26-update-defconfig: ;
|
|
|
|
|
endif
|
2012-05-04 07:40:53 +02:00
|
|
|
endif
|
2011-10-14 16:56:56 +02:00
|
|
|
|
2011-09-06 23:16:09 +02:00
|
|
|
# Support for rebuilding the kernel after the cpio archive has
|
|
|
|
|
# been generated in $(BINARIES_DIR)/rootfs.cpio.
|
|
|
|
|
$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.cpio
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
@$(call MESSAGE,"Rebuilding kernel with initramfs")
|
|
|
|
|
# Build the kernel.
|
2011-07-11 22:46:07 +02:00
|
|
|
$(TARGET_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_IMAGE_NAME)
|
2013-07-31 17:47:36 +02:00
|
|
|
$(LINUX_APPEND_DTB)
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
# Copy the kernel image to its final destination
|
2011-07-11 22:46:07 +02:00
|
|
|
cp $(LINUX_IMAGE_PATH) $(BINARIES_DIR)
|
2012-03-17 10:46:55 +01:00
|
|
|
# If there is a .ub file copy it to the final destination
|
2012-03-21 02:19:04 +01:00
|
|
|
test ! -f $(LINUX_IMAGE_PATH).ub || cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
$(Q)touch $@
|
|
|
|
|
|
|
|
|
|
# The initramfs building code must make sure this target gets called
|
|
|
|
|
# after it generated the initramfs list of files.
|
2011-07-11 22:46:07 +02:00
|
|
|
linux-rebuild-with-initramfs linux26-rebuild-with-initramfs: $(LINUX_DIR)/.stamp_initramfs_rebuilt
|
linux: add support for initramfs
In Buildroot, the kernel is built and installed *before* the root
filesystems are built. This allows the root filesystem to correctly
contain the kernel modules that have been installed.
However, in the initramfs case, the root filesystem is part of the
kernel. Therefore, the kernel should be built *after* the root
filesystem (which, in the initramfs case simply builds a text file
listing all files/directories/devices/symlinks that should be part of
the initramfs). However, this isn't possible as the initramfs text
file would lack all kernel modules.
So, the solution choosen here is to keep the normal order: kernel is
built before the root filesystem is generated, and to add a little
quirk to retrigger a kernel compilation after the root filesystem
generation.
To do so, we add a ROOTFS_$(FSTYPE)_POST_TARGETS variable to the
fs/common.mk infrastructure. This allows individual filesystems to set
a target name that we should depend on *after* generating the root
filesystem itself (contrary to normal ROOTFS_$(FSTYPE)_DEPENDENCIES,
on which we depend *before* generating the root filesystem).
The initramfs code in fs/initramfs/initramfs.mk uses this to add a
dependency on 'linux26-rebuild-with-initramfs'.
In linux/linux.mk, we do various things :
* If BR2_TARGET_ROOTFS_INITRAMFS is enabled (i.e if initramfs is
enabled as a root filesystem type), then we create an empty
rootfs.initramfs file (remember that at this point, the root
filesystem hasn't been generated) and we adjust the kernel
configuration to include an initramfs. Of course, in the initial
kernel build, this initramfs will be empty.
* In the linux26-rebuild-with-initramfs target, we retrigger a
compilation of the kernel image, after removing the initramfs in
the kernel sources to make sure it gets properly rebuilt (we've
experienced cases were modifying the rootfs.initramfs file wouldn't
retrigger the generation of the initramfs at the kernel level).
This is fairly quirky, but initramfs really is a special case, so in
one way or another, we need a little quirk to solve its specialness.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-13 19:19:38 +02:00
|
|
|
|
2010-07-29 15:40:28 +02:00
|
|
|
# Checks to give errors that the user can understand
|
2010-09-28 14:43:25 +02:00
|
|
|
ifeq ($(filter source,$(MAKECMDGOALS)),)
|
2010-07-29 15:40:28 +02:00
|
|
|
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
|
|
|
|
|
ifeq ($(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG)),)
|
|
|
|
|
$(error No kernel defconfig name specified, check your BR2_LINUX_KERNEL_DEFCONFIG setting)
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
|
|
|
|
|
ifeq ($(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE)),)
|
|
|
|
|
$(error No kernel configuration file specified, check your BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE setting)
|
|
|
|
|
endif
|
2010-09-28 14:43:25 +02:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
endif
|
