2014-07-07 23:07:53 +02:00
|
|
|
Technologic Systems TS-5x00 SBCs
|
|
|
|
|
================================
|
|
|
|
|
|
|
|
|
|
This document explains how to set up a basic Buildroot system for the
|
|
|
|
|
Technologic Systems TS-5x00 serie of x86-based Single Board Computers.
|
|
|
|
|
|
|
|
|
|
TS-5x00 Single Board Computers are based on the AMD Elan520 processor. For more
|
2022-03-07 22:14:55 +01:00
|
|
|
information please have a look at https://docs.embeddedTS.com/Documentation_Home#AMD
|
2014-07-07 23:07:53 +02:00
|
|
|
|
|
|
|
|
The kernel configuration works for any AMD Elan520-based SBCs, but the support
|
|
|
|
|
is enhanced for the TS-5500 and TS-5400 models (on-board devices registration
|
|
|
|
|
and additional sysfs attributes under /sys/devices/platform/).
|
|
|
|
|
|
|
|
|
|
To build the default configuration you only have to:
|
|
|
|
|
|
2018-03-05 18:15:04 +01:00
|
|
|
$ make ts5500_defconfig
|
2014-07-07 23:07:53 +02:00
|
|
|
$ make
|
|
|
|
|
|
|
|
|
|
You will need a Compact Flash card of sufficient size and the first or only
|
|
|
|
|
partition configured as Linux type, with the bootable flag.
|
|
|
|
|
|
|
|
|
|
You can transfer the system on the partition then optionally resize it with:
|
|
|
|
|
|
|
|
|
|
# dd if=output/images/rootfs.ext4 of=/dev/sdX1
|
|
|
|
|
# resize2fs /dev/sdX1
|
|
|
|
|
|
|
|
|
|
Or you can just extract the root filesystem to the partition with:
|
|
|
|
|
|
|
|
|
|
# mount /dev/sdX1 /mnt
|
|
|
|
|
# tar -pxf output/images/rootfs.tar -C /mnt
|
|
|
|
|
# umount /mnt
|
|
|
|
|
|
|
|
|
|
To install the bootloader, you will need to copy the MBR:
|
|
|
|
|
|
|
|
|
|
# cat output/images/syslinux/mbr.bin > /dev/sdX
|
|
|
|
|
|
|
|
|
|
Then install SYSLINUX in the mounted partition:
|
|
|
|
|
|
|
|
|
|
# mount /dev/sdX1 /mnt
|
|
|
|
|
# output/host/sbin/extlinux --install /mnt/boot/syslinux
|
|
|
|
|
# umount /mnt
|
|
|
|
|
|
|
|
|
|
IMPORTANT: In order for the board to boot the Compact Flash with a recent
|
|
|
|
|
config, the BIOS must use Logical Block Addressing (LBA). You can do it by
|
|
|
|
|
choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
|
2014-12-23 16:24:56 +01:00
|
|
|
Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
|
|
|
|
|
flag on partition 1. For details about the CMOS setup, please see:
|
2022-03-07 22:14:55 +01:00
|
|
|
https://docs.embeddedts.com/TS-5500#System_BIOS_Setup_Screens
|
2014-07-07 23:07:53 +02:00
|
|
|
|
|
|
|
|
Connect a terminal program to the rs232 connector marked "COM2"
|
|
|
|
|
with baudrate set to 115200, insert the Compact Flash card into the socket,
|
|
|
|
|
power up the board, and enjoy.
|
