kumquat-buildroot/board/minnowboard/readme.txt

33 lines
701 B
Plaintext
Raw Normal View History

How to get started with the MinnowBoard (MAX)
=============================================
1. Build
Apply the defconfig:
$ make minnowboard_defconfig
Or, for the Minnowboard MAX board:
$ make minnowboard_max_defconfig
Add any additional packages required and build:
$ make
2. Write the SD card
The build process will create a SD card image in output/images.
Write the image to an mSD card, insert into the MinnowBoard
and power the board on.
$ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync
The system starts two consoles: one on the serial port
and one on HDMI.
3. Enjoy
Additional information about this board can be found at
http://www.minnowboard.org/.