44 lines
1.3 KiB
Plaintext
44 lines
1.3 KiB
Plaintext
|
Intro
|
||
|
|
=====
|
||
|
|
|
||
|
|
The instructions herein are valid for the FriendlyARM NanoPi NEO,
|
||
|
|
both the 256MiB and 512MiB versions. They should also work the the
|
||
|
|
NanoPi NEO Air, but this is untested so far.
|
||
|
|
|
||
|
|
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
|
||
|
|
- quad-core Cortex-A7 @1.2GHz
|
||
|
|
- 256 or 512MiB of DDR
|
||
|
|
- uSDCard as only storage option
|
||
|
|
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
|
||
|
|
- 1x USB 2.0 OTG (also used as power source)
|
||
|
|
- 10/100 ethernet MAC
|
||
|
|
- GPIOs, SPI, I2c...
|
||
|
|
|
||
|
|
Support for the Nanopi NEO in U-Boot and Linux is very recent, so
|
||
|
|
much so that we have to use an -rc tag for U-Boot and a special
|
||
|
|
Linux tree.
|
||
|
|
|
||
|
|
Unfortunately, support for the ethernet MAC and the USB OTG are not
|
||
|
|
yet upstream, but are being actively worked on.
|
||
|
|
|
||
|
|
|
||
|
|
How to build
|
||
|
|
============
|
||
|
|
|
||
|
|
$ make nanopi_neo_defconfig
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Note: you will need access to the internet to download the required
|
||
|
|
sources.
|
||
|
|
|
||
|
|
You will then obtain an image ready to be written to your micro SDcard:
|
||
|
|
|
||
|
|
$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
|
||
|
|
|
||
|
|
Notes:
|
||
|
|
- replace 'sdX' with the actual device with your micro SDcard,
|
||
|
|
- you may need to be root to do that (use 'sudo').
|
||
|
|
|
||
|
|
Insert the micro SDcard in your NanoPi NEO and power it up. The console
|
||
|
|
is on the serial line, 115200 8N1.
|