kumquat-buildroot/docs/manual/common-usage.txt

146 lines
4.8 KiB
Plaintext
Raw Normal View History

// -*- mode:doc; -*-
// vim: set syntax=asciidoc:
Daily use
---------
include::rebuilding-packages.txt[]
Offline builds
~~~~~~~~~~~~~~
If you intend to do an offline build and just want to download
all sources that you previously selected in the configurator
('menuconfig', 'nconfig', 'xconfig' or 'gconfig'), then issue:
--------------------
$ make source
--------------------
You can now disconnect or copy the content of your +dl+
directory to the build-host.
Building out-of-tree
~~~~~~~~~~~~~~~~~~~~
As default, everything built by Buildroot is stored in the directory
+output+ in the Buildroot tree.
Buildroot also supports building out of tree with a syntax similar to
the Linux kernel. To use it, add +O=<directory>+ to the make command
line:
--------------------
$ make O=/tmp/build
--------------------
Or:
--------------------
$ cd /tmp/build; make O=$PWD -C path/to/buildroot
--------------------
All the output files will be located under +/tmp/build+.
When using out-of-tree builds, the Buildroot +.config+ and temporary
files are also stored in the output directory. This means that you can
safely run multiple builds in parallel using the same source tree as
long as they use unique output directories.
For ease of use, Buildroot generates a Makefile wrapper in the output
directory - so after the first run, you no longer need to pass +O=..+
and +-C ..+, simply run (in the output directory):
--------------------
$ make <target>
--------------------
[[env-vars]]
Environment variables
~~~~~~~~~~~~~~~~~~~~~
Buildroot also honors some environment variables, when they are passed
to +make+ or set in the environment:
* +HOSTCXX+, the host C++ compiler to use
* +HOSTCC+, the host C compiler to use
* +UCLIBC_CONFIG_FILE=<path/to/.config>+, path to
the uClibc configuration file, used to compile uClibc, if an
internal toolchain is being built.
+
Note that the uClibc configuration file can also be set from the
configuration interface, so through the Buildroot +.config+ file; this
is the recommended way of setting it.
+
* +BUSYBOX_CONFIG_FILE=<path/to/.config>+, path to
the Busybox configuration file.
+
Note that the Busybox configuration file can also be set from the
configuration interface, so through the Buildroot +.config+ file; this
is the recommended way of setting it.
+
* +BR2_DL_DIR+ to override the directory in which
Buildroot stores/retrieves downloaded files
+
Note that the Buildroot download directory can also be set from the
configuration interface, so through the Buildroot +.config+ file; this
is the recommended way of setting it.
* +GRAPH_ALT+, if set and non-empty, to use an alternate color-scheme in
build-time graphs
* +GRAPH_OUT+ to set the filetype of generated graphs, either +pdf+ (the
default), or +png+.
An example that uses config files located in the toplevel directory and
in your $HOME:
--------------------
$ make UCLIBC_CONFIG_FILE=uClibc.config BUSYBOX_CONFIG_FILE=$HOME/bb.config
--------------------
If you want to use a compiler other than the default +gcc+
or +g+++ for building helper-binaries on your host, then do
--------------------
$ make HOSTCXX=g++-4.3-HEAD HOSTCC=gcc-4.3-HEAD
--------------------
Dealing efficiently with filesystem images
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Filesystem images can get pretty big, depending on the filesystem you choose,
the number of packages, whether you provisioned free space... Yet, some
locations in the filesystems images may just be _empty_ (eg. a long run of
'zeroes'); such a file is called a _sparse_ file.
Most tools can handle sparse files efficiently, and will only store or write
those parts of a sparse file that are not empty.
For example:
* +tar+ accepts the +-S+ option to tell it to only store non-zero blocks
of sparse files:
** +tar cf archive.tar -S [files...]+ will efficiently store sparse files
in a tarball
** +tar xf archive.tar -S+ will efficiently store sparse files extracted
from a tarball
* +cp+ accepts the +--sparse=WHEN+ option (+WHEN+ is one of +auto+,
+never+ or +always+):
** +cp --sparse=always source.file dest.file+ will make +dest.file+ a
sparse file if +source.file+ has long runs of zeroes
Other tools may have similar options. Please consult their respective man
pages.
You can use sparse files if you need to store the filesystem images (eg.
to transfer from one machine to another), of if you need to send them (eg.
to the Q&A team).
Note however that flashing a filesystem image to a device while using the
sparse mode of +dd+ may result in a broken filesystem (eg. the block bitmap
of an ext2 filesystem may be corrupted; or, if you have sparse files in
your filesystem, those parts may not be all-zeroes when read back). You
should only use sparse files when handling files on the build machine, not
when transferring them to an actual device that will be used on the target.