290 lines
8.6 KiB
Plaintext
290 lines
8.6 KiB
Plaintext
|
diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
|
||
|
index 0ec0b1c..3a58375 100644
|
||
|
--- a/sound/avr32/ac97c.c
|
||
|
+++ b/sound/avr32/ac97c.c
|
||
|
@@ -25,6 +25,8 @@
|
||
|
#include <sound/ac97_codec.h>
|
||
|
#include <sound/memalloc.h>
|
||
|
|
||
|
+#include <asm/gpio.h>
|
||
|
+#include <asm/arch/board.h>
|
||
|
#include <asm/dma-controller.h>
|
||
|
|
||
|
#include "ac97c.h"
|
||
|
@@ -37,6 +39,7 @@ struct atmel_ac97_dma_info {
|
||
|
struct dma_request_cyclic req_rx;
|
||
|
unsigned short rx_periph_id;
|
||
|
unsigned short tx_periph_id;
|
||
|
+ unsigned short controller;
|
||
|
};
|
||
|
|
||
|
struct atmel_ac97 {
|
||
|
@@ -51,6 +54,7 @@ struct atmel_ac97 {
|
||
|
struct snd_ac97_bus *ac97_bus;
|
||
|
int opened;
|
||
|
int period;
|
||
|
+ int reset_pin;
|
||
|
u64 cur_format;
|
||
|
unsigned int cur_rate;
|
||
|
struct clk *mck;
|
||
|
@@ -692,6 +696,12 @@ timed_out:
|
||
|
|
||
|
static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
|
||
|
{
|
||
|
+ if (chip->reset_pin >= 0) {
|
||
|
+ gpio_set_value(chip->reset_pin, 0);
|
||
|
+ udelay(5);
|
||
|
+ gpio_set_value(chip->reset_pin, 1);
|
||
|
+ }
|
||
|
+
|
||
|
ac97c_writel(chip, MR, AC97C_MR_WRST);
|
||
|
mdelay(1);
|
||
|
ac97c_writel(chip, MR, AC97C_MR_ENA);
|
||
|
@@ -727,6 +737,7 @@ static int __devinit snd_atmel_ac97_create(struct snd_card *card,
|
||
|
.read = snd_atmel_ac97_read,
|
||
|
};
|
||
|
struct atmel_ac97 *chip = get_chip(card);
|
||
|
+ struct ac97c_platform_data *pdata;
|
||
|
struct resource *regs;
|
||
|
struct clk *mck;
|
||
|
int err;
|
||
|
@@ -735,6 +746,29 @@ static int __devinit snd_atmel_ac97_create(struct snd_card *card,
|
||
|
if (!regs)
|
||
|
return -ENXIO;
|
||
|
|
||
|
+ pdata = pdev->dev.platform_data;
|
||
|
+ if (pdata) {
|
||
|
+ chip->reset_pin = pdata->reset_pin;
|
||
|
+
|
||
|
+ if (chip->reset_pin >= 0) {
|
||
|
+ if (gpio_request(chip->reset_pin,
|
||
|
+ chip->card->shortname)) {
|
||
|
+ dev_dbg(&pdev->dev,
|
||
|
+ "ac97: reset pin "
|
||
|
+ "not available\n");
|
||
|
+ chip->reset_pin = -1;
|
||
|
+ } else {
|
||
|
+ gpio_direction_output(chip->reset_pin, 1);
|
||
|
+ }
|
||
|
+ }
|
||
|
+
|
||
|
+ chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
|
||
|
+ chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
|
||
|
+ chip->dma.controller = pdata->dma_controller_id;
|
||
|
+ } else {
|
||
|
+ return -ENXIO;
|
||
|
+ }
|
||
|
+
|
||
|
mck = clk_get(&pdev->dev, "pclk");
|
||
|
if (IS_ERR(mck))
|
||
|
return PTR_ERR(mck);
|
||
|
@@ -789,23 +823,19 @@ static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
|
||
|
if (err)
|
||
|
goto out_free_card;
|
||
|
|
||
|
- /* TODO: Get this information from the platform device */
|
||
|
- chip->dma.req_tx.req.dmac = find_dma_controller(0);
|
||
|
+ chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
|
||
|
if (!chip->dma.req_tx.req.dmac) {
|
||
|
dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
|
||
|
err = -ENODEV;
|
||
|
goto out_free_card;
|
||
|
}
|
||
|
- chip->dma.req_rx.req.dmac = find_dma_controller(0);
|
||
|
+ chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
|
||
|
if (!chip->dma.req_rx.req.dmac) {
|
||
|
dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
|
||
|
err = -ENODEV;
|
||
|
goto out_free_card;
|
||
|
}
|
||
|
|
||
|
- chip->dma.rx_periph_id = 3;
|
||
|
- chip->dma.tx_periph_id = 4;
|
||
|
-
|
||
|
ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
|
||
|
if (ch < 0) {
|
||
|
dev_dbg(&chip->pdev->dev,
|
||
|
--
|
||
|
1.5.2.5
|
||
|
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
|
||
|
index 06795d0..58f3841 100644
|
||
|
--- a/arch/avr32/mach-at32ap/at32ap700x.c
|
||
|
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
|
||
|
@@ -1552,12 +1552,15 @@ static struct clk atmel_ac97c0_pclk = {
|
||
|
.index = 10,
|
||
|
};
|
||
|
|
||
|
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
|
||
|
+struct platform_device *__init
|
||
|
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
|
||
|
{
|
||
|
struct platform_device *pdev;
|
||
|
|
||
|
if (id != 0)
|
||
|
return NULL;
|
||
|
+ if (!data)
|
||
|
+ return NULL;
|
||
|
|
||
|
pdev = platform_device_alloc("atmel_ac97c", id);
|
||
|
if (!pdev)
|
||
|
@@ -1567,10 +1570,17 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
|
||
|
ARRAY_SIZE(atmel_ac97c0_resource)))
|
||
|
goto err_add_resources;
|
||
|
|
||
|
- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
|
||
|
- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
|
||
|
- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
|
||
|
- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
|
||
|
+ if (platform_device_add_data(pdev, data,
|
||
|
+ sizeof(struct ac97c_platform_data)))
|
||
|
+ goto err_add_resources;
|
||
|
+
|
||
|
+ select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
|
||
|
+ select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
|
||
|
+ select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
|
||
|
+ select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
|
||
|
+
|
||
|
+ if (data->reset_pin != GPIO_PIN_NONE)
|
||
|
+ at32_select_gpio(data->reset_pin, 0);
|
||
|
|
||
|
atmel_ac97c0_pclk.dev = &pdev->dev;
|
||
|
|
||
|
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
|
||
|
index 8816b66..0386a0e 100644
|
||
|
--- a/include/asm-avr32/arch-at32ap/board.h
|
||
|
+++ b/include/asm-avr32/arch-at32ap/board.h
|
||
|
@@ -76,7 +76,16 @@ struct mci_platform_data {
|
||
|
};
|
||
|
struct platform_device *
|
||
|
at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
|
||
|
-struct platform_device *at32_add_device_ac97c(unsigned int id);
|
||
|
+
|
||
|
+struct ac97c_platform_data {
|
||
|
+ unsigned short dma_rx_periph_id;
|
||
|
+ unsigned short dma_tx_periph_id;
|
||
|
+ unsigned short dma_controller_id;
|
||
|
+ int reset_pin;
|
||
|
+};
|
||
|
+struct platform_device *
|
||
|
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
|
||
|
+
|
||
|
struct platform_device *at32_add_device_abdac(unsigned int id);
|
||
|
|
||
|
struct cf_platform_data {
|
||
|
--
|
||
|
1.5.2.5
|
||
|
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
|
||
|
index 90436fa..eba6f89 100644
|
||
|
--- a/arch/avr32/boards/atstk1000/atstk1002.c
|
||
|
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
|
||
|
@@ -151,6 +151,15 @@ static void __init set_hw_addr(struct platform_device *pdev)
|
||
|
clk_put(pclk);
|
||
|
}
|
||
|
|
||
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
+static struct ac97c_platform_data __initdata ac97c0_data = {
|
||
|
+ .dma_rx_periph_id = 3,
|
||
|
+ .dma_tx_periph_id = 4,
|
||
|
+ .dma_controller_id = 0,
|
||
|
+ .reset_pin = GPIO_PIN_NONE,
|
||
|
+};
|
||
|
+#endif
|
||
|
+
|
||
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
||
|
static void __init atstk1002_setup_extdac(void)
|
||
|
{
|
||
|
@@ -253,7 +262,7 @@ static int __init atstk1002_init(void)
|
||
|
#endif
|
||
|
at32_add_device_usba(0, NULL);
|
||
|
#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
- at32_add_device_ac97c(0);
|
||
|
+ at32_add_device_ac97c(0, &ac97c0_data);
|
||
|
#else
|
||
|
at32_add_device_abdac(0);
|
||
|
#endif
|
||
|
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
|
||
|
index 768d204..2564e3c 100644
|
||
|
--- a/arch/avr32/boards/atstk1000/atstk1003.c
|
||
|
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
|
||
|
@@ -72,6 +72,15 @@ static struct cf_platform_data __initdata cf0_data = {
|
||
|
.cs = 4,
|
||
|
};
|
||
|
|
||
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
+static struct ac97c_platform_data __initdata ac97c0_data = {
|
||
|
+ .dma_rx_periph_id = 3,
|
||
|
+ .dma_tx_periph_id = 4,
|
||
|
+ .dma_controller_id = 0,
|
||
|
+ .reset_pin = GPIO_PIN_NONE,
|
||
|
+};
|
||
|
+#endif
|
||
|
+
|
||
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
||
|
static void __init atstk1003_setup_extdac(void)
|
||
|
{
|
||
|
@@ -164,7 +173,7 @@ static int __init atstk1003_init(void)
|
||
|
#endif
|
||
|
at32_add_device_usba(0, NULL);
|
||
|
#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
- at32_add_device_ac97c(0);
|
||
|
+ at32_add_device_ac97c(0, &ac97c0_data);
|
||
|
#else
|
||
|
at32_add_device_abdac(0);
|
||
|
#endif
|
||
|
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
|
||
|
index 96015dd..3c25a6f 100644
|
||
|
--- a/arch/avr32/boards/atstk1000/atstk1004.c
|
||
|
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
|
||
|
@@ -64,6 +64,15 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
|
||
|
} };
|
||
|
#endif
|
||
|
|
||
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
+static struct ac97c_platform_data __initdata ac97c0_data = {
|
||
|
+ .dma_rx_periph_id = 3,
|
||
|
+ .dma_tx_periph_id = 4,
|
||
|
+ .dma_controller_id = 0,
|
||
|
+ .reset_pin = GPIO_PIN_NONE,
|
||
|
+};
|
||
|
+#endif
|
||
|
+
|
||
|
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
||
|
static void __init atstk1004_setup_extdac(void)
|
||
|
{
|
||
|
@@ -136,7 +145,7 @@ static int __init atstk1004_init(void)
|
||
|
fbmem_start, fbmem_size);
|
||
|
at32_add_device_usba(0, NULL);
|
||
|
#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
||
|
- at32_add_device_ac97c(0);
|
||
|
+ at32_add_device_ac97c(0, &ac97c0_data);
|
||
|
#else
|
||
|
at32_add_device_abdac(0);
|
||
|
#endif
|
||
|
--
|
||
|
1.5.2.5
|
||
|
--- a/arch/avr32/boards/atngw100/setup.c 2008-02-26 12:27:37.000000000 -0500
|
||
|
+++ b/arch/avr32/boards/atngw100/setup.c 2008-02-26 12:26:08.000000000 -0500
|
||
|
@@ -201,6 +201,13 @@ static struct platform_device i2c_gpio_d
|
||
|
};
|
||
|
#endif
|
||
|
|
||
|
+static struct ac97c_platform_data __initdata ac97c0_data = {
|
||
|
+ .dma_rx_periph_id = 3,
|
||
|
+ .dma_tx_periph_id = 4,
|
||
|
+ .dma_controller_id = 0,
|
||
|
+ .reset_pin = GPIO_PIN_NONE, // change to whatever pin you want, i.e. GPIO_PIN_PB(18)
|
||
|
+};
|
||
|
+
|
||
|
static int __init atngw100_init(void)
|
||
|
{
|
||
|
unsigned i;
|
||
|
@@ -222,7 +229,7 @@ static int __init atngw100_init(void)
|
||
|
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
||
|
at32_add_device_mci(0, &mci0_data);
|
||
|
at32_add_device_usba(0, NULL);
|
||
|
- at32_add_device_ac97c(0);
|
||
|
+ at32_add_device_ac97c(0, &ac97c0_data);
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
|
||
|
at32_select_gpio(ngw_leds[i].gpio,
|