NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bd6b49f697
kumquat-buildroot/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.10/linux-2.6.22.10-502-atmel_mci-fix-two-subtle-but-deadly-races.patch

439 lines
16 KiB
Diff
Raw Normal View History

Add 2.6.22.10 and 2.6.23 support
2007-10-12 17:10:27 +02:00
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH 2/2] atmel_mci: Fix two subtle but deadly races
This patch fixes two possible races in the atmel_mci driver, at least
one of which may cause card probing to fail.
The first one may happen if a command fails and the next command is
queued before the controller is ready to accept a new one. Fix this by
not enabling error interrupts for commands and instead do any error
handling when the CMDRDY bit has been set.
The second one may happen after a successful read data transfer where
then next command is queued after the DMA transfer is complete, but
before the whole data transfer from the card is complete (i.e. the
card is still sending CRC, for example.) Fix this by waiting for the
NOTBUSY bit to be set before considering the request to be done. This
will also ensure that we actually see any CRC failures before
completing the request.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
drivers/mmc/host/atmel-mci.c | 172 +++++++++++++-----------------------------
1 files changed, 54 insertions(+), 118 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 1dc91b4..45323c9 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -28,20 +28,15 @@
#define DRIVER_NAME "atmel_mci"
-#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
- MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
- MCI_BIT(RTOE))
#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
MCI_BIT(OVRE) | MCI_BIT(UNRE))
enum {
EVENT_CMD_COMPLETE = 0,
- EVENT_CMD_ERROR,
EVENT_DATA_COMPLETE,
EVENT_DATA_ERROR,
EVENT_STOP_SENT,
EVENT_STOP_COMPLETE,
- EVENT_STOP_ERROR,
EVENT_DMA_ERROR,
EVENT_CARD_DETECT,
};
@@ -61,13 +56,14 @@ struct atmel_mci {
struct mmc_command *cmd;
struct mmc_data *data;
+ u32 cmd_status;
+ u32 data_status;
+ u32 stop_status;
u32 stop_cmdr;
- u32 stop_iflags;
struct tasklet_struct tasklet;
unsigned long pending_events;
unsigned long completed_events;
- u32 error_status;
int present;
int detect_pin;
@@ -99,8 +95,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Test bit macros for completed events */
#define mci_cmd_is_complete(host) \
test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-#define mci_cmd_error_is_complete(host) \
- test_bit(EVENT_CMD_ERROR, &host->completed_events)
#define mci_data_is_complete(host) \
test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
#define mci_data_error_is_complete(host) \
@@ -109,8 +103,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
test_bit(EVENT_STOP_SENT, &host->completed_events)
#define mci_stop_is_complete(host) \
test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-#define mci_stop_error_is_complete(host) \
- test_bit(EVENT_STOP_ERROR, &host->completed_events)
#define mci_dma_error_is_complete(host) \
test_bit(EVENT_DMA_ERROR, &host->completed_events)
#define mci_card_detect_is_complete(host) \
@@ -119,8 +111,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Test and clear bit macros for pending events */
#define mci_clear_cmd_is_pending(host) \
test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-#define mci_clear_cmd_error_is_pending(host) \
- test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
#define mci_clear_data_is_pending(host) \
test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
#define mci_clear_data_error_is_pending(host) \
@@ -129,8 +119,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
#define mci_clear_stop_is_pending(host) \
test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-#define mci_clear_stop_error_is_pending(host) \
- test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
#define mci_clear_dma_error_is_pending(host) \
test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
#define mci_clear_card_detect_is_pending(host) \
@@ -139,8 +127,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Test and set bit macros for completed events */
#define mci_set_cmd_is_completed(host) \
test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-#define mci_set_cmd_error_is_completed(host) \
- test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
#define mci_set_data_is_completed(host) \
test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
#define mci_set_data_error_is_completed(host) \
@@ -149,8 +135,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
#define mci_set_stop_is_completed(host) \
test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-#define mci_set_stop_error_is_completed(host) \
- test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
#define mci_set_dma_error_is_completed(host) \
test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
#define mci_set_card_detect_is_completed(host) \
@@ -159,8 +143,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Set bit macros for completed events */
#define mci_set_cmd_complete(host) \
set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-#define mci_set_cmd_error_complete(host) \
- set_bit(EVENT_CMD_ERROR, &host->completed_events)
#define mci_set_data_complete(host) \
set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
#define mci_set_data_error_complete(host) \
@@ -169,8 +151,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
set_bit(EVENT_STOP_SENT, &host->completed_events)
#define mci_set_stop_complete(host) \
set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-#define mci_set_stop_error_complete(host) \
- set_bit(EVENT_STOP_ERROR, &host->completed_events)
#define mci_set_dma_error_complete(host) \
set_bit(EVENT_DMA_ERROR, &host->completed_events)
#define mci_set_card_detect_complete(host) \
@@ -179,8 +159,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Set bit macros for pending events */
#define mci_set_cmd_pending(host) \
set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-#define mci_set_cmd_error_pending(host) \
- set_bit(EVENT_CMD_ERROR, &host->pending_events)
#define mci_set_data_pending(host) \
set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
#define mci_set_data_error_pending(host) \
@@ -189,8 +167,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
set_bit(EVENT_STOP_SENT, &host->pending_events)
#define mci_set_stop_pending(host) \
set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-#define mci_set_stop_error_pending(host) \
- set_bit(EVENT_STOP_ERROR, &host->pending_events)
#define mci_set_dma_error_pending(host) \
set_bit(EVENT_DMA_ERROR, &host->pending_events)
#define mci_set_card_detect_pending(host) \
@@ -199,8 +175,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
/* Clear bit macros for pending events */
#define mci_clear_cmd_pending(host) \
clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-#define mci_clear_cmd_error_pending(host) \
- clear_bit(EVENT_CMD_ERROR, &host->pending_events)
#define mci_clear_data_pending(host) \
clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
#define mci_clear_data_error_pending(host) \
@@ -209,8 +183,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
clear_bit(EVENT_STOP_SENT, &host->pending_events)
#define mci_clear_stop_pending(host) \
clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-#define mci_clear_stop_error_pending(host) \
- clear_bit(EVENT_STOP_ERROR, &host->pending_events)
#define mci_clear_dma_error_pending(host) \
clear_bit(EVENT_DMA_ERROR, &host->pending_events)
#define mci_clear_card_detect_pending(host) \
@@ -471,20 +443,16 @@ static void atmci_set_timeout(struct atmel_mci *host,
}
/*
- * Return mask with interrupt flags to be handled for this command.
+ * Return mask with command flags to be enabled for this command.
*/
static u32 atmci_prepare_command(struct mmc_host *mmc,
- struct mmc_command *cmd,
- u32 *cmd_flags)
+ struct mmc_command *cmd)
{
u32 cmdr;
- u32 iflags;
cmd->error = MMC_ERR_NONE;
- cmdr = 0;
- BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
- cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
+ cmdr = MCI_BF(CMDNB, cmd->opcode);
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136)
@@ -503,16 +471,11 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
cmdr |= MCI_BIT(OPDCMD);
- iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
- if (!(cmd->flags & MMC_RSP_CRC))
- iflags &= ~MCI_BIT(RCRCE);
-
dev_dbg(&mmc->class_dev,
"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
- *cmd_flags = cmdr;
- return iflags;
+ return cmdr;
}
static void atmci_start_command(struct atmel_mci *host,
@@ -596,13 +559,13 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->pending_events = 0;
host->completed_events = 0;
- iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
+ iflags = MCI_BIT(CMDRDY);
+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
if (mrq->stop) {
- BUG_ON(!data);
+ WARN_ON(!data);
- host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
- &host->stop_cmdr);
+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
if (!(data->flags & MMC_DATA_WRITE))
host->stop_cmdr |= MCI_BIT(TRDIR);
@@ -716,7 +679,7 @@ static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
struct atmel_mci *host = mmc_priv(mmc);
atmci_start_command(host, data->stop, host->stop_cmdr | flags);
- mci_writel(host, IER, host->stop_iflags);
+ mci_writel(host, IER, MCI_BIT(CMDRDY));
}
static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
@@ -735,18 +698,30 @@ static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
atmci_request_end(host->mmc, data->mrq);
}
-static void atmci_command_error(struct mmc_host *mmc,
- struct mmc_command *cmd,
- u32 status)
+static void atmci_command_complete(struct atmel_mci *host,
+ struct mmc_command *cmd, u32 status)
{
- dev_dbg(&mmc->class_dev, "command error: status=0x%08x\n", status);
-
if (status & MCI_BIT(RTOE))
cmd->error = MMC_ERR_TIMEOUT;
- else if (status & MCI_BIT(RCRCE))
+ else if ((cmd->flags & MMC_RSP_CRC)
+ && (status & MCI_BIT(RCRCE)))
cmd->error = MMC_ERR_BADCRC;
- else
+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
cmd->error = MMC_ERR_FAILED;
+
+ if (cmd->error != MMC_ERR_NONE) {
+ dev_dbg(&host->mmc->class_dev,
+ "command error: op=0x%x status=0x%08x\n",
+ cmd->opcode, status);
+
+ if (cmd->data) {
+ dma_stop_request(host->dma.req.req.dmac,
+ host->dma.req.req.channel);
+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
+ | MCI_DATA_ERROR_FLAGS);
+ host->data = NULL;
+ }
+ }
}
static void atmci_tasklet_func(unsigned long priv)
@@ -761,38 +736,16 @@ static void atmci_tasklet_func(unsigned long priv)
host->pending_events, host->completed_events,
mci_readl(host, IMR));
- if (mci_clear_cmd_error_is_pending(host)) {
- struct mmc_command *cmd;
-
- mci_set_cmd_error_complete(host);
- mci_clear_cmd_pending(host);
- cmd = host->mrq->cmd;
-
- if (cmd->data) {
- dma_stop_request(host->dma.req.req.dmac,
- host->dma.req.req.channel);
- host->data = NULL;
- }
-
- atmci_command_error(mmc, cmd, host->error_status);
- atmci_request_end(mmc, cmd->mrq);
- }
- if (mci_clear_stop_error_is_pending(host)) {
- mci_set_stop_error_complete(host);
- mci_clear_stop_pending(host);
- atmci_command_error(mmc, host->mrq->stop,
- host->error_status);
- if (!host->data)
- atmci_request_end(mmc, host->mrq);
- }
if (mci_clear_cmd_is_pending(host)) {
mci_set_cmd_complete(host);
- if (!mrq->data || mci_data_is_complete(host)
+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
+ if (!host->data || mci_data_is_complete(host)
|| mci_data_error_is_complete(host))
atmci_request_end(mmc, mrq);
}
if (mci_clear_stop_is_pending(host)) {
mci_set_stop_complete(host);
+ atmci_command_complete(host, mrq->stop, host->stop_status);
if (mci_data_is_complete(host)
|| mci_data_error_is_complete(host))
atmci_request_end(mmc, mrq);
@@ -815,7 +768,7 @@ static void atmci_tasklet_func(unsigned long priv)
atmci_data_complete(host, data);
}
if (mci_clear_data_error_is_pending(host)) {
- u32 status = host->error_status;
+ u32 status = host->data_status;
mci_set_data_error_complete(host);
mci_clear_data_pending(host);
@@ -858,10 +811,8 @@ static void atmci_tasklet_func(unsigned long priv)
/* Clean up queue if present */
if (mrq) {
- if (!mci_cmd_is_complete(host)
- && !mci_cmd_error_is_complete(host)) {
+ if (!mci_cmd_is_complete(host))
mrq->cmd->error = MMC_ERR_TIMEOUT;
- }
if (mrq->data && !mci_data_is_complete(host)
&& !mci_data_error_is_complete(host)) {
dma_stop_request(host->dma.req.req.dmac,
@@ -869,10 +820,8 @@ static void atmci_tasklet_func(unsigned long priv)
host->data->error = MMC_ERR_TIMEOUT;
atmci_data_complete(host, data);
}
- if (mrq->stop && !mci_stop_is_complete(host)
- && !mci_stop_error_is_complete(host)) {
+ if (mrq->stop && !mci_stop_is_complete(host))
mrq->stop->error = MMC_ERR_TIMEOUT;
- }
host->cmd = NULL;
atmci_request_end(mmc, mrq);
@@ -895,13 +844,16 @@ static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
cmd->resp[2] = mci_readl(host, RSPR);
cmd->resp[3] = mci_readl(host, RSPR);
- mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
host->cmd = NULL;
- if (mci_stop_sent_is_complete(host))
+ if (mci_stop_sent_is_complete(host)) {
+ host->stop_status = status;
mci_set_stop_pending(host);
- else
+ } else {
+ host->cmd_status = status;
mci_set_cmd_pending(host);
+ }
tasklet_schedule(&host->tasklet);
}
@@ -920,18 +872,16 @@ static void atmci_xfer_complete(struct dma_request *_req)
if (data->stop && !mci_set_stop_sent_is_completed(host))
send_stop_cmd(host->mmc, data, 0);
- if (data->flags & MMC_DATA_READ) {
- mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
- mci_set_data_pending(host);
- tasklet_schedule(&host->tasklet);
- } else {
- /*
- * For the WRITE case, wait for NOTBUSY. This function
- * is called when everything has been written to the
- * controller, not when the card is done programming.
- */
- mci_writel(host, IER, MCI_BIT(NOTBUSY));
- }
+ /*
+ * Regardless of what the documentation says, we have to wait
+ * for NOTBUSY even after block read operations.
+ *
+ * When the DMA transfer is complete, the controller may still
+ * be reading the CRC from the card, i.e. the data transfer is
+ * still in progress and we haven't seen all the potential
+ * error bits yet.
+ */
+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
}
static void atmci_dma_error(struct dma_request *_req)
@@ -963,24 +913,10 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
pending = status & mask;
do {
- if (pending & MCI_CMD_ERROR_FLAGS) {
- mci_writel(host, IDR, (MCI_BIT(CMDRDY)
- | MCI_BIT(NOTBUSY)
- | MCI_CMD_ERROR_FLAGS
- | MCI_DATA_ERROR_FLAGS));
- host->error_status = status;
- host->cmd = NULL;
- if (mci_stop_sent_is_complete(host))
- mci_set_stop_error_pending(host);
- else
- mci_set_cmd_error_pending(host);
- tasklet_schedule(&host->tasklet);
- break;
- }
if (pending & MCI_DATA_ERROR_FLAGS) {
mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
| MCI_DATA_ERROR_FLAGS));
- host->error_status = status;
+ host->data_status = status;
mci_set_data_error_pending(host);
tasklet_schedule(&host->tasklet);
break;
--
1.5.3.2
_______________________________________________
Kernel mailing list
Kernel@avr32linux.org
http://duppen.flaskehals.net/cgi-bin/mailman/listinfo/kernel
Reference in New Issue Copy Permalink