84 lines
2.0 KiB
Plaintext
84 lines
2.0 KiB
Plaintext
|
***************************
|
||
|
|
Freescale i.MX8mq EVK board
|
||
|
|
***************************
|
||
|
|
|
||
|
|
This file documents the Buildroot support for the Freescale i.MX8mq
|
||
|
|
EVK board.
|
||
|
|
|
||
|
|
Hardware support
|
||
|
|
================
|
||
|
|
|
||
|
|
Currently only basic support for hardware is available, currently no
|
||
|
|
support for GPU, VPU and other HW features.
|
||
|
|
|
||
|
|
Build
|
||
|
|
=====
|
||
|
|
|
||
|
|
First, configure Buildroot for the i.MX8mq EVK board:
|
||
|
|
|
||
|
|
make freescale_imx8mqevk_defconfig
|
||
|
|
|
||
|
|
Build all components:
|
||
|
|
|
||
|
|
make
|
||
|
|
|
||
|
|
You will find in output/images/ the following files:
|
||
|
|
- bl31.bin
|
||
|
|
- boot.vfat
|
||
|
|
- fsl-imx8mq-evk.dtb
|
||
|
|
- Image
|
||
|
|
- imx-boot-imx8mqevk-sd.bin
|
||
|
|
- lpddr4_pmu_train_fw.bin
|
||
|
|
- rootfs.ext2
|
||
|
|
- rootfs.ext4
|
||
|
|
- rootfs.tar
|
||
|
|
- sdcard.img
|
||
|
|
- signed_hdmi_imx8m.bin
|
||
|
|
- u-boot.bin
|
||
|
|
- u-boot.imx
|
||
|
|
- u-boot-nodtb.bin
|
||
|
|
- u-boot-spl-ddr.bin
|
||
|
|
|
||
|
|
Create a bootable SD card
|
||
|
|
=========================
|
||
|
|
|
||
|
|
To determine the device associated to the SD card have a look in the
|
||
|
|
/proc/partitions file:
|
||
|
|
|
||
|
|
cat /proc/partitions
|
||
|
|
|
||
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
||
|
|
directory, ready to be dumped on a SD card. Launch the following
|
||
|
|
command as root:
|
||
|
|
|
||
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
||
|
|
|
||
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
||
|
|
|
||
|
|
For details about the medium image layout, see the definition in
|
||
|
|
board/freescale/common/imx/genimage.cfg.template_imx8.
|
||
|
|
|
||
|
|
Boot the i.MX8mq EVK board
|
||
|
|
==========================
|
||
|
|
|
||
|
|
To boot your newly created system:
|
||
|
|
- insert the SD card in the SD slot of the board;
|
||
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
||
|
|
emulator at 115200 bps, 8n1;
|
||
|
|
- power on the board.
|
||
|
|
|
||
|
|
Enable HDMI output
|
||
|
|
==================
|
||
|
|
|
||
|
|
To enable HDMI output at boot you must provide the video kernel boot
|
||
|
|
argument. To set the video boot argument from U-Boot run after
|
||
|
|
stoping in U-Boot prompt:
|
||
|
|
|
||
|
|
setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32@60'
|
||
|
|
saveenv
|
||
|
|
reset
|
||
|
|
|
||
|
|
Change screen resolution to suit your connected display.
|
||
|
|
|
||
|
|
Enjoy!
|