NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
9600ed45e2
kumquat-buildroot/package/kvm-unit-tests/kvm-unit-tests.mk

58 lines
1.6 KiB
Makefile
Raw Normal View History

package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
################################################################################
#
# kvm-unit-tests
#
################################################################################
kvm-unit-tests: bump to kvm-unit-tests-20171020 - 0001-Makefile-remove-Werror-to-avoid-build-failures.patch is adjusted to apply to the new version of kvm-unit-tests - 0001-x86-hyperv_clock-be-explicit-about-mul-instruction-d.patch is removed, as it has been merged upstream as of commit 45276b5860522921c77fb3ccc1458ff5f223c3c6. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-12-03 14:41:18 +01:00
KVM_UNIT_TESTS_VERSION = kvm-unit-tests-20171020
package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
KVM_UNIT_TESTS_SITE = $(BR2_KERNEL_MIRROR)/scm/virt/kvm/kvm-unit-tests.git
KVM_UNIT_TESTS_SITE_METHOD = git
package: use SPDX short identifier for LGPLv2/LGPLv2+ We want to use SPDX identifier for license string as much as possible. SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+. This change is done using following command. find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g' Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-30 15:43:37 +02:00
KVM_UNIT_TESTS_LICENSE = LGPL-2.0
package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
KVM_UNIT_TESTS_LICENSE_FILES = COPYRIGHT
ifeq ($(BR2_arm),y)
KVM_UNIT_TESTS_ARCH = arm
else ifeq ($(BR2_i386),y)
KVM_UNIT_TESTS_ARCH = i386
else ifeq ($(BR2_powerpc64)$(BR2_powerpc64le),y)
KVM_UNIT_TESTS_ARCH = ppc64
else ifeq ($(BR2_x86_64),y)
kvm-unit-tests: really use KVM_UNIT_TESTS_ARCH and fix value on x86-64 The kvm-unit-tests package defines a KVM_UNIT_TESTS_ARCH variable, but never used it. Due to this, on PowerPC64, we were passing an incorrect value, causing a build failure. In addition, once the KVM_UNIT_TESTS_ARCH is used, it appeared that its value for x86_64 was incorrect, due a typo: it was x86_84 instead of x86_64. Fixes: http://autobuild.buildroot.net/results/16836c02f4d1ab5df6b2e21a4fcdbbf4a7542f22/ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-06 13:39:26 +01:00
KVM_UNIT_TESTS_ARCH = x86_64
package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
endif
ifeq ($(BR2_ENDIAN),"LITTLE")
KVM_UNIT_TESTS_ENDIAN = little
else
KVM_UNIT_TESTS_ENDIAN = big
endif
KVM_UNIT_TESTS_CONF_OPTS =\
kvm-unit-tests: really use KVM_UNIT_TESTS_ARCH and fix value on x86-64 The kvm-unit-tests package defines a KVM_UNIT_TESTS_ARCH variable, but never used it. Due to this, on PowerPC64, we were passing an incorrect value, causing a build failure. In addition, once the KVM_UNIT_TESTS_ARCH is used, it appeared that its value for x86_64 was incorrect, due a typo: it was x86_84 instead of x86_64. Fixes: http://autobuild.buildroot.net/results/16836c02f4d1ab5df6b2e21a4fcdbbf4a7542f22/ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-06 13:39:26 +01:00
--arch="$(KVM_UNIT_TESTS_ARCH)" \
kvm-unit-tests: pass the --processor configure argument The configure script uses this to set the -mcpu option. If nothing is passed, it defaults to -mcpu=cortex-a15 for arm, and -mcpu=cortex-a57 for aarch64, which may conflict with the actual architecture. The --processor option is only really used for arm and aarch64, but it doesn't hurt to also pass it for the other arches. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-20 14:50:05 +01:00
--processor="$(call qstrip,$(BR2_GCC_TARGET_CPU))" \
package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
--endian="$(KVM_UNIT_TESTS_ENDIAN)"
kvm-unit-tests: Fix x86_64 to use host compiler kvm-unit-tests requires a multilib compiler for x86_64 as it compiles 32bit boot code. This patch uses the BR2_HOSTARCH_NEEDS_IA32_COMPILER option to enforce this and avoids using TARGET_CROSS for x86_64 targets and uses the host 32bit (and 64bit) capable compiler. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: reword comment in .mk file.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-26 05:19:15 +02:00
# For all architectures but x86-64, we use the target
# compiler. However, for x86-64, we use the host compiler, as
# kvm-unit-tests builds 32 bit code, which Buildroot toolchains for
# x86-64 cannot do.
ifneq ($(BR2_x86_64),y)
KVM_UNIT_TESTS_CONF_OPTS += --cross-prefix="$(TARGET_CROSS)"
endif
package/kvm-unit-tests: new package The unit tests are tiny guest operating systems that generally execute only tens of lines of C and assembler test code in order to obtain its PASS/FAIL result. Unit tests provide KVM and virt hardware functional testing by targeting the features through minimal implementations of their use per the hardware specification. The simplicity of unit tests make them easy to verify they are correct, easy to maintain, and easy to use in timing measurements. Unit tests are also often used for quick and dirty bug reproducers. The reproducers may then be kept as regression tests. It's strongly encouraged that patches implementing new KVM features are submitted with accompanying unit tests. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [Thomas: - order architecture dependencies in Config.in alphabetically. - rewrap Config.in help text, lines were too long - add an empty line between the package description and the upstream project URL in the Config.in help text - don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not correct for i386 for example. Instead, just handle the few architectures that the package supports. - remove useless double quotes in variable definitions. - remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing everything in /share/ and not /usr/share/, and setting the prefix to TARGET_DIR at configure time is not good. Instead, pass DESTDIR at installation time.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 01:02:36 +02:00
define KVM_UNIT_TESTS_CONFIGURE_CMDS
cd $(@D) && ./configure $(KVM_UNIT_TESTS_CONF_OPTS)
endef
define KVM_UNIT_TESTS_BUILD_CMDS
$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) standalone
endef
define KVM_UNIT_TESTS_INSTALL_TARGET_CMDS
$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
DESTDIR=$(TARGET_DIR)/usr/share/kvm-unit-tests/ \
install
endef
# Does use configure script but not an autotools one
$(eval $(generic-package))
Reference in New Issue Copy Permalink