NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
75bad69099
kumquat-buildroot/configs/pc_x86_64_efi_defconfig

66 lines
1.9 KiB
Plaintext
Raw Normal View History

configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Architecture
BR2_x86_64=y
# System
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Required tools to create bootable media
BR2_PACKAGE_HOST_DOSFSTOOLS=y
configs/pc_x86_64_efi: use genimage GPT partition table support Thanks to the introduction of GPT partition table support in genimage, this commit improves the pc_x86_64_efi_defconfig to remove the use of the custom script creating the image. Tested in QEMU, not on a physical device. So: - revert commit fee29b05bb7db25e37c8a5175ce00dc712554edf[1] - add GPT support - tweak shell script to add the correct UUID in genimage config. [1]: https://git.buildroot.net/buildroot/commit/?id=fee29b05bb7db25e37c8a5175ce00dc712554edf [2]: https://git.buildroot.net/buildroot/commit/?id=79b8540d624ac4846ba341b1b9691eccacf0bc05 Signed-off-by: Alexandre PAYEN <alexandre.payen@smile.fr> Cc: Carlos Santos <casantos@datacom.com.br> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [Thomas: - drop commented code in post-build.sh - take into account comments made by Carlos Santos in http://patchwork.ozlabs.org/patch/1143502/] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 15:54:57 +02:00
BR2_PACKAGE_HOST_GENIMAGE=y
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_PACKAGE_HOST_MTOOLS=y
# Bootloader
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
fs/ext2: rename BR2_TARGET_ROOTFS_EXT2_BLOCKS to BR2_TARGET_ROOTFS_EXT2_SIZE This change deprecates the ext2/3/4 rootfs size in blocks symbol in favor of one that mimic the fs-size argument behavior of mkfs (i.e. size in a human readable format accepting k, m, g or t suffix or their upper-case variants). This change also updates the defconfigs that used to set BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol. Signed-off-by: Samuel Martin <s.martin49@gmail.com> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-09 07:00:38 +02:00
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# BR2_TARGET_ROOTFS_TAR is not set
configs/pc_x86_64_efi: use genimage GPT partition table support Thanks to the introduction of GPT partition table support in genimage, this commit improves the pc_x86_64_efi_defconfig to remove the use of the custom script creating the image. Tested in QEMU, not on a physical device. So: - revert commit fee29b05bb7db25e37c8a5175ce00dc712554edf[1] - add GPT support - tweak shell script to add the correct UUID in genimage config. [1]: https://git.buildroot.net/buildroot/commit/?id=fee29b05bb7db25e37c8a5175ce00dc712554edf [2]: https://git.buildroot.net/buildroot/commit/?id=79b8540d624ac4846ba341b1b9691eccacf0bc05 Signed-off-by: Alexandre PAYEN <alexandre.payen@smile.fr> Cc: Carlos Santos <casantos@datacom.com.br> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [Thomas: - drop commented code in post-build.sh - take into account comments made by Carlos Santos in http://patchwork.ozlabs.org/patch/1143502/] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 15:54:57 +02:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image-efi.sh"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
configs/pc_x86_64_{bios, efi}_defconfig: Switch to kernel 6.1.24 LTS Let's use a more modern kernel with a broader range of hardware support for PCs. We stick to 6.1, rather than 6.2, as the former is an LTS, whicle the latter is not. Signed-off-by: Adam Duskett <aduskett@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2023-04-13 19:04:34 +02:00
# Linux headers same as kernel, a 6.1 LTS series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/pc_x86_64_{bios, efi}_defconfig: Switch to kernel 6.1.24 LTS Let's use a more modern kernel with a broader range of hardware support for PCs. We stick to 6.1, rather than 6.2, as the former is an LTS, whicle the latter is not. Signed-off-by: Adam Duskett <aduskett@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2023-04-13 19:04:34 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.24"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
configs/pc_x86_64_{bios,efi}_defconfig: use custom linux config Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs aren't taken into consideration when the qemu defconfigs are updated, breaking the build. Instead use a custom linux config for the pc defconfigs. With this, we also can get rid of the fragment file containing the delta fra the qemu config. Created by linux-update-defconfig (after turning of the fragment file). Also drop the linux kernel version number from the file name as it just causes extra noise whenever the kernel is bumped. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-06-15 11:25:26 +02:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
configs/pc_x86_64_efi: needs host-openssl to build Linux Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/125631916 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-11-27 09:08:39 +01:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/pc_x86_64_{bios, efi}_defconfig: add midding libelf kernel dependency objtool built by the kernel requires libelf ldd output/build/linux-6.1.24/tools/objtool/objtool linux-vdso.so.1 libelf.so.1 => output/host/lib/libelf.so.1 While updating the kernel [1] we forgot to select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide Buildroot's host-libelf. Using host-libelf avoid linking with libelf installed on the host or failing to build objtool if libelf is not installed. [1] d45538f2e7acc1b330b191d559a81e8c1a961648 Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436869 https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436872 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-08-18 01:08:42 +02:00
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
# Packages
#
# Use connman so that networking setup is simpler, via connmanctl tool
# acpid is for seamless power button support
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_CONNMAN=y
BR2_PACKAGE_CONNMAN_CLIENT=y
BR2_PACKAGE_CONNMAN_WIFI=y
Reference in New Issue Copy Permalink