NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7430a9bc9c
kumquat-buildroot/toolchain/gcc/gcc-uclibc-3.x.mk

365 lines
13 KiB
Makefile
Raw Normal View History

Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
Update binutils from 2.14.90.0.6 to 2.14.90.0.8. Update from gcc 3.3.2 to 3.3.3. Test builds done for i386 and mipsel (3.3.3) and i386 (2.95). Soft float support not yet tested with 3.3.3.
2004-02-18 09:28:28 +01:00
# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
GCC_VERSION:=$(strip $(GCC_VERSION))
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Sigh...
2004-09-03 04:36:10 +02:00
#GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION)
GCC_SITE:=http://mirrors.rcn.net/pub/sourceware/gcc/releases/gcc-$(GCC_VERSION)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#
# snapshots....
#GCC_VERSION:=3.3-20031013
#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
#
GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
GCC_CAT:=bzcat
Patch from Lauri Leukkunen adding knobs controlling whether host binaries are stripped or not
2004-02-27 20:26:55 +01:00
GCC_STRIP_HOST_BINARIES:=true
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#############################################################
#
# Setup some initial stuff
#
#############################################################
TARGET_LANGUAGES:=c
simplify target language selection to remove nasty nested ifeq
2005-03-02 08:30:26 +01:00
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
TARGET_LANGUAGES:=$(TARGET_LANGUAGES),c++
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
endif
simplify target language selection to remove nasty nested ifeq
2005-03-02 08:30:26 +01:00
ifeq ($(BR2_INSTALL_LIBGCJ),y)
TARGET_LANGUAGES:=$(TARGET_LANGUAGES),java
endif
ifeq ($(BR2_INSTALL_OBJC),y)
TARGET_LANGUAGES:=$(TARGET_LANGUAGES),objc
Use --enable-sjlj-exceptions when configuring gcc so that exception handling works for dynamicly linked executables. Only tested so far on i386 with gcc 3.3.2. But combined with the latest ldso updates, I can now get a dynamicly linked java helloworld app to run. Add a config toggle for building gcj and libgcj. The build runs fine through gcc-final but currently requires hand interventions to build gcc-target. Again, only tested so far on i386.
2004-02-11 04:32:34 +01:00
endif
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#############################################################
#
# build the first pass gcc compiler
#
#############################################################
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-initial
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(DL_DIR)/$(GCC_SOURCE):
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
mkdir -p $(DL_DIR)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
mkdir -p $(TOOL_BUILD_DIR)
-xvf -> $(TAR_OPTIONS)
2004-10-11 16:01:07 +02:00
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) -
use the shared gnuconfig package to update config.sub files rather than patching them
2005-11-11 06:28:08 +01:00
$(CONFIG_UPDATE) $(GCC_DIR)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
facelift step number two
2004-10-09 04:49:33 +02:00
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) \*.patch
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
# Note: The soft float situation has improved considerably with gcc 3.4.x.
# We can dispense with the custom spec files, as well as libfloat for the arm case.
# However, we still need a patch for arm. There's a similar patch for gcc 3.3.x
# which needs to be integrated so we can kill of libfloat for good, except for
# anyone (?) who might still be using gcc 2.95. mjn3
Fixup SOFT_FLOAT handling
2004-10-09 23:28:56 +02:00
ifeq ($(BR2_SOFT_FLOAT),y)
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
ifeq ("$(strip $(ARCH))","arm")
facelift step number two
2004-10-09 04:49:33 +02:00
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
Sigh...
2004-09-03 04:36:10 +02:00
endif
ifeq ("$(strip $(ARCH))","armeb")
facelift step number two
2004-10-09 04:49:33 +02:00
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
endif
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
# Not yet updated to 3.4.1.
#ifeq ("$(strip $(ARCH))","i386")
facelift step number two
2004-10-09 04:49:33 +02:00
#toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc i386-gcc-soft-float.patch
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
#endif
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
endif
touch $(GCC_DIR)/.patched
# The --without-headers option stopped working with gcc 3.0 and has never been
# # fixed, so we need to actually have working C library header files prior to
# # the step or libgcc will not build...
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
mkdir -p $(GCC_BUILD_DIR1)
(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=c \
--disable-shared \
Update binutils from 2.14.90.0.6 to 2.14.90.0.8. Update from gcc 3.3.2 to 3.3.3. Test builds done for i386 and mipsel (3.3.3) and i386 (2.95). Soft float support not yet tested with 3.3.3.
2004-02-18 09:28:28 +01:00
--with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
control pthread support since some arches like x86_64 dont yet support it in uClibc
2005-10-01 02:36:38 +02:00
$(THREADS) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
touch $(GCC_BUILD_DIR1)/.compiled
$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) install-gcc
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
#rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_initial-clean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR1)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_initial-dirclean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR1)
#############################################################
#
teach BR2_INSTALL_LIBSTDCPP to actually install libstdc++
2005-03-02 08:07:22 +01:00
# second pass compiler build. Build the compiler targeting
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# the newly built shared uClibc library.
#
#############################################################
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
#
# Sigh... I had to rework things because using --with-gxx-include-dir
# causes issues with include dir search order for g++. This seems to
# have something to do with "path translations" and possibly doesn't
# affect gcc-target. However, I haven't tested gcc-target yet so no
# guarantees. mjn3
GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-final
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/lib/libc.a
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
mkdir -p $(GCC_BUILD_DIR2)
Update binutils from 2.14.90.0.6 to 2.14.90.0.8. Update from gcc 3.3.2 to 3.3.3. Test builds done for i386 and mipsel (3.3.3) and i386 (2.95). Soft float support not yet tested with 3.3.3.
2004-02-18 09:28:28 +01:00
# Important! Required for limits.h to be fixed.
Change all instances of 'ln -sf' to 'ln -snf'
2005-04-15 04:19:11 +02:00
ln -snf ../include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
control pthread support since some arches like x86_64 dont yet support it in uClibc
2005-10-01 02:36:38 +02:00
$(THREADS) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
Use --enable-sjlj-exceptions when configuring gcc so that exception handling works for dynamicly linked executables. Only tested so far on i386 with gcc 3.3.2. But combined with the latest ldso updates, I can now get a dynamicly linked java helloworld app to run. Add a config toggle for building gcj and libgcj. The build runs fine through gcc-final but currently requires hand interventions to build gcc-target. Again, only tested so far on i386.
2004-02-11 04:32:34 +01:00
$(GCC_USE_SJLJ_EXCEPTIONS) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) all
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR2) install
if target arch installs into a lib64 dir, make sure we move the stuff to plain old lib
2005-09-22 05:06:33 +02:00
if [ -d "$(STAGING_DIR)/lib64" ] ; then \
if [ ! -e "$(STAGING_DIR)/lib" ] ; then \
mkdir "$(STAGING_DIR)/lib" ; \
fi ; \
mv "$(STAGING_DIR)/lib64/"* "$(STAGING_DIR)/lib/" ; \
rmdir "$(STAGING_DIR)/lib64" ; \
fi
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# Strip the host binaries
Patch from Lauri Leukkunen adding knobs controlling whether host binaries are stripped or not
2004-02-27 20:26:55 +01:00
ifeq ($(GCC_STRIP_HOST_BINARIES),true)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
Patch from Lauri Leukkunen adding knobs controlling whether host binaries are stripped or not
2004-02-27 20:26:55 +01:00
endif
Create some symlinks for {*-}cc since gcc 3.3.6 (at least) doesn't seem to install them.
2005-08-03 03:25:12 +02:00
# Make sure we have 'cc'.
if [ ! -e $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-cc ] ; then \
ln -snf $(REAL_GNU_TARGET_NAME)-gcc \
$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-cc ; \
fi;
if [ ! -e $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/cc ] ; then \
ln -snf gcc $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/cc ; \
fi;
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# Set up the symlinks to enable lying about target name.
set -e; \
(cd $(STAGING_DIR); \
Change all instances of 'ln -sf' to 'ln -snf'
2005-04-15 04:19:11 +02:00
ln -snf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
cd bin; \
for app in $(REAL_GNU_TARGET_NAME)-* ; do \
Change all instances of 'ln -sf' to 'ln -snf'
2005-04-15 04:19:11 +02:00
ln -snf $${app} \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
done; \
);
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
#
# Now for the ugly 3.3.x soft float hack...
#
Fixup SOFT_FLOAT handling
2004-10-09 23:28:56 +02:00
ifeq ($(BR2_SOFT_FLOAT),y)
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
# Make sure we have a soft float specs file for this arch
Major buildroot facelift, step one. -Erik
2004-10-09 03:06:03 +02:00
if [ ! -f toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float ] ; then \
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
echo soft float configured but no specs file for this arch ; \
/bin/false ; \
fi;
# Replace specs file with one that defaults to soft float mode.
if [ ! -f $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
echo staging dir specs file is missing ; \
/bin/false ; \
fi;
Major buildroot facelift, step one. -Erik
2004-10-09 03:06:03 +02:00
cp toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
endif
endif
#
# Ok... that's enough of that.
#
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
touch $(GCC_BUILD_DIR2)/.installed
Only install libgcc_s when it is present
2004-07-25 08:58:30 +02:00
$(TARGET_DIR)/lib/libgcc_s.so.1: $(GCC_BUILD_DIR2)/.installed
Install /lib/libgcc_s.so.1
2004-07-20 13:45:10 +02:00
# These are in /lib, so...
Don't forget about libgcc_s_nof.so when processing libgcc_s.so
2005-04-25 12:18:30 +02:00
rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
-$(STRIP) $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libgcc_s*.so.1
Only install libgcc_s when it is present
2004-07-25 08:58:30 +02:00
-cp -a $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libgcc_s* $(TARGET_DIR)/lib/
teach BR2_INSTALL_LIBSTDCPP to actually install libstdc++
2005-03-02 08:07:22 +01:00
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
-cp -a $(STAGING_DIR)/lib/libstdc++.so* $(TARGET_DIR)/lib/
endif
ifeq ($(BR2_INSTALL_LIBGCJ),y)
-cp -a $(STAGING_DIR)/lib/libgcj.so* $(TARGET_DIR)/lib/
-cp -a $(STAGING_DIR)/lib/lib-org-w3c-dom.so* $(TARGET_DIR)/lib/
-cp -a $(STAGING_DIR)/lib/lib-org-xml-sax.so* $(TARGET_DIR)/lib/
-mkdir -p $(TARGET_DIR)/usr/lib/security
-cp -a $(STAGING_DIR)/usr/lib/security/libgcj.security $(TARGET_DIR)/usr/lib/security/
-cp -a $(STAGING_DIR)/usr/lib/security/classpath.security $(TARGET_DIR)/usr/lib/security/
endif
Install /lib/libgcc_s.so.1
2004-07-20 13:45:10 +02:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc: uclibc-configured binutils gcc_initial $(LIBFLOAT_TARGET) uclibc \
Install /lib/libgcc_s.so.1
2004-07-20 13:45:10 +02:00
$(TARGET_DIR)/lib/libgcc_s.so.1 $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc-source: $(DL_DIR)/$(GCC_SOURCE)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc-clean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR2)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc-dirclean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR2)
#############################################################
#
# Next build target gcc compiler
#
#############################################################
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
mkdir -p $(GCC_BUILD_DIR3)
(cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=/usr \
--build=$(GNU_HOST_NAME) \
--host=$(REAL_GNU_TARGET_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--with-gxx-include-dir=/usr/include/c++ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
control pthread support since some arches like x86_64 dont yet support it in uClibc
2005-10-01 02:36:38 +02:00
$(THREADS) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
Use --enable-sjlj-exceptions when configuring gcc so that exception handling works for dynamicly linked executables. Only tested so far on i386 with gcc 3.3.2. But combined with the latest ldso updates, I can now get a dynamicly linked java helloworld app to run. Add a config toggle for building gcj and libgcj. The build runs fine through gcc-final but currently requires hand interventions to build gcc-target. Again, only tested so far on i386.
2004-02-11 04:32:34 +01:00
$(GCC_USE_SJLJ_EXCEPTIONS) \
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR3)/.configured
$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
PATH=$(TARGET_PATH) \
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
$(MAKE) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
touch $(GCC_BUILD_DIR3)/.compiled
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
#
# gcc-lib dir changes names to gcc with 3.4.mumble
#
ifeq ($(findstring 3.4.,$(GCC_VERSION)),3.4.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
else
GCC_LIB_SUBDIR=lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
Support gcc 4.[01]. Only tried for 4.0.0 at this point.
2005-04-30 23:58:58 +02:00
# sigh... we need to find a better way
ifeq ($(findstring 4.0.,$(GCC_VERSION)),4.0.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
ifeq ($(findstring 4.1.,$(GCC_VERSION)),4.1.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
PATH=$(TARGET_PATH) \
Kill off old unused JLEVEL junk
2004-12-11 12:23:44 +01:00
$(MAKE) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# Remove broken specs file (cross compile flag is set).
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
rm -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/specs
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
#
# Now for the ugly 3.3.x soft float hack...
#
Fixup SOFT_FLOAT handling
2004-10-09 23:28:56 +02:00
ifeq ($(BR2_SOFT_FLOAT),y)
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
# Add a specs file that defaults to soft float mode.
Major buildroot facelift, step one. -Erik
2004-10-09 03:06:03 +02:00
cp toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
Add back in support for 3.3.4 soft float toolchains, although arm would require reenabling linking with -lfloat in uClibc.
2004-09-14 13:52:26 +02:00
# Make sure gcc does not think we are cross compiling
$(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
endif
#
# Ok... that's enough of that.
#
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
-(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
-(cd $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
-(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
Don't forget about libgcc_s_nof.so when processing libgcc_s.so
2005-04-25 12:18:30 +02:00
-(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s*.so.*.*.* > /dev/null 2>&1)
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#
We need to remove the *.la files or libtool gets confused in the rootfs.
2004-02-27 08:47:54 +01:00
rm -f $(TARGET_DIR)/usr/lib/*.la*
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
# $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
# Work around problem of missing syslimits.h
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
@if [ ! -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/syslimits.h ] ; then \
echo "warning: working around missing syslimits.h" ; \
cp -f $(STAGING_DIR)/$(GCC_LIB_SUBDIR)/include/syslimits.h \
$(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/ ; \
fi
Create some symlinks for {*-}cc since gcc 3.3.6 (at least) doesn't seem to install them.
2005-08-03 03:25:12 +02:00
# Make sure we have 'cc'.
if [ ! -e $(TARGET_DIR)/usr/bin/cc ] ; then \
ln -snf gcc $(TARGET_DIR)/usr/bin/cc ; \
fi;
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
# These are in /lib, so...
Don't forget about libgcc_s_nof.so when processing libgcc_s.so
2005-04-25 12:18:30 +02:00
#rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
#touch -c $(TARGET_DIR)/usr/bin/gcc
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_target-clean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR3)
fix the gcc_target-clean target
2004-10-19 17:46:20 +02:00
rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)*
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
Update to what I'm currently using. Lots of changes... 1) Allow selection of binutils/gcc/gdb/kernel headers to build, although some of the older tool patches probably need updating. 2) Rework gdb build so that remote debugging now works with gdbserver. 3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
2004-09-03 02:49:43 +02:00
gcc_target-dirclean:
Enable building <arch>-linux-uclibc toolchains. Note that, due to config issues for applications, we also create staging_dir/bin/<arch>-linux-* symlinks which allows us to configure most apps with target=<arch>-linux. gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support. There are still some issues (mainly related to wide char time strings and wcsftime) to be addressed, but those are on hold until the uClibc locale internals are reworked once again. With the new stuff, we can also build gcc 2.95 and STLport again, although the native gcc build for the target is failing. Archs supported (some archs not yet tested): 2.95 - i386, arm, mips*, powerpc. 3.3.2 - Hopefull all for which uClibc has shared lib support.
2004-01-14 11:03:44 +01:00
rm -rf $(GCC_BUILD_DIR3)
Reference in New Issue Copy Permalink