kumquat-buildroot/fs/common.mk

140 lines
5.3 KiB
Makefile
Raw Normal View History

#
# Macro that builds the needed Makefile target to create a root
# filesystem image.
#
# The following variable must be defined before calling this macro
#
# ROOTFS_$(FSTYPE)_CMD, the command that generates the root
# filesystem image. A single command is allowed. The filename of the
# filesystem image that it must generate is $$@.
#
# The following variables can optionaly be defined
#
# ROOTFS_$(FSTYPE)_DEPENDENCIES, the list of dependencies needed to
# build the root filesystem (usually host tools)
#
# ROOTFS_$(FSTYPE)_PRE_GEN_HOOKS, a list of hooks to call before
# generating the filesystem image
#
# ROOTFS_$(FSTYPE)_POST_GEN_HOOKS, a list of hooks to call after
# generating the filesystem image
#
# In terms of configuration option, this macro assumes that the
# BR2_TARGET_ROOTFS_$(FSTYPE) config option allows to enable/disable
# the generation of a filesystem image of a particular type. If
# the configuration options BR2_TARGET_ROOTFS_$(FSTYPE)_GZIP,
# BR2_TARGET_ROOTFS_$(FSTYPE)_BZIP2 or
# BR2_TARGET_ROOTFS_$(FSTYPE)_LZMA exist and are enabled, then the
# macro will automatically generate a compressed filesystem image.
FS_DIR = $(BUILD_DIR)/buildroot-fs
FAKEROOT_SCRIPT = $(FS_DIR)/fakeroot.fs
FULL_DEVICE_TABLE = $(FS_DIR)/device_table.txt
ROOTFS_DEVICE_TABLES = $(call qstrip,$(BR2_ROOTFS_DEVICE_TABLE) \
$(BR2_ROOTFS_STATIC_DEVICE_TABLE))
USERS_TABLE = $(FS_DIR)/users_table.txt
ROOTFS_USERS_TABLES = $(call qstrip,$(BR2_ROOTFS_USERS_TABLES))
infra: consistently use double dollar signs inside inner-xxx-targets The inner-xxx-targets in the buildroot package infrastructures are evaluated using $(eval) which causes variable references to be a bit different than in regular make code. As we want most references to be expanded only at the time of the $(eval) we should not use standard references $(VAR) but rather use double dollar signs $$(VAR). This includes function references like $(call), $(subst), etc. The only exception is the reference to pkgdir/pkgname and numbered variables, which are parameters to the inner block: $(1), $(2), etc. This patch introduces consistent usage of double-dollar signs throughout the different inner-xxx-targets blocks. In some cases, this would potentially cause circular references, in particular when the value of HOST_FOO_VAR would be obtained from the corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test is added to check for a host package (the only case where such constructions are relevant; these are not circular). Benefits of these changes are: - behavior of variables is now again as expected. For example, setting $(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while originally it would cause very odd results. - The output of 'make printvars' is now much more useful. This target shows the value of all variables, and the expression that led to that value. However, if the expression was coming from an inner-xxx-targets block, and was using single dollar signs, it would show in printvars as VAR = value (value) while if double dollar signs are used, it would effectively look like VAR = value (actual expression) as is intended. This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME, FOO_SITE_METHOD and FOO_MAKE. The correctness of this patch has been verified using 'make printvars', 'make manual' and 'make legal-info' before and after applying this patch, and comparing the output. Insight-provided-by: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-06-11 21:12:24 +02:00
# Since this function will be called from within an $(eval ...)
# all variable references except the arguments must be $$-quoted.
define inner-rootfs
# extra deps
ROOTFS_$(2)_DEPENDENCIES += host-fakeroot host-makedevs \
$$(if $$(PACKAGES_USERS)$$(ROOTFS_USERS_TABLES),host-mkpasswd)
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
ROOTFS_$(2)_COMPRESS_EXT = .gz
ROOTFS_$(2)_COMPRESS_CMD = gzip -9 -c
endif
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_BZIP2),y)
ROOTFS_$(2)_COMPRESS_EXT = .bz2
ROOTFS_$(2)_COMPRESS_CMD = bzip2 -9 -c
endif
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZMA),y)
ROOTFS_$(2)_DEPENDENCIES += host-lzma
ROOTFS_$(2)_COMPRESS_EXT = .lzma
ROOTFS_$(2)_COMPRESS_CMD = $$(LZMA) -9 -c
endif
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZ4),y)
ROOTFS_$(2)_DEPENDENCIES += host-lz4
ROOTFS_$(2)_COMPRESS_EXT = .lz4
ROOTFS_$(2)_COMPRESS_CMD = lz4 -l -9 -c
endif
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_LZO),y)
ROOTFS_$(2)_DEPENDENCIES += host-lzop
ROOTFS_$(2)_COMPRESS_EXT = .lzo
ROOTFS_$(2)_COMPRESS_CMD = $$(LZOP) -9 -c
endif
ifeq ($$(BR2_TARGET_ROOTFS_$(2)_XZ),y)
ROOTFS_$(2)_DEPENDENCIES += host-xz
ROOTFS_$(2)_COMPRESS_EXT = .xz
ROOTFS_$(2)_COMPRESS_CMD = xz -9 -C crc32 -c
endif
$$(BINARIES_DIR)/rootfs.$(1): target-finalize $$(ROOTFS_$(2)_DEPENDENCIES)
@$$(call MESSAGE,"Generating root filesystem image rootfs.$(1)")
rm -rf $(FS_DIR)
mkdir -p $(FS_DIR)
$$(foreach hook,$$(ROOTFS_$(2)_PRE_GEN_HOOKS),$$(call $$(hook))$$(sep))
echo '#!/bin/sh' > $$(FAKEROOT_SCRIPT)
echo "set -e" >> $$(FAKEROOT_SCRIPT)
echo "chown -h -R 0:0 $$(TARGET_DIR)" >> $$(FAKEROOT_SCRIPT)
ifneq ($$(ROOTFS_USERS_TABLES),)
cat $$(ROOTFS_USERS_TABLES) >> $$(USERS_TABLE)
endif
$$(call PRINTF,$$(PACKAGES_USERS)) >> $$(USERS_TABLE)
PATH=$$(BR_PATH) $$(TOPDIR)/support/scripts/mkusers $$(USERS_TABLE) $$(TARGET_DIR) >> $$(FAKEROOT_SCRIPT)
ifneq ($$(ROOTFS_DEVICE_TABLES),)
cat $$(ROOTFS_DEVICE_TABLES) > $$(FULL_DEVICE_TABLE)
ifeq ($$(BR2_ROOTFS_DEVICE_CREATION_STATIC),y)
$$(call PRINTF,$$(PACKAGES_DEVICES_TABLE)) >> $$(FULL_DEVICE_TABLE)
endif
endif
$$(call PRINTF,$$(PACKAGES_PERMISSIONS_TABLE)) >> $$(FULL_DEVICE_TABLE)
echo "$$(HOST_DIR)/bin/makedevs -d $$(FULL_DEVICE_TABLE) $$(TARGET_DIR)" >> $$(FAKEROOT_SCRIPT)
$$(foreach s,$$(call qstrip,$$(BR2_ROOTFS_POST_FAKEROOT_SCRIPT)),\
echo "echo '$$(TERM_BOLD)>>> Executing fakeroot script $$(s)$$(TERM_RESET)'" >> $$(FAKEROOT_SCRIPT); \
echo $$(EXTRA_ENV) $$(s) $$(TARGET_DIR) $$(BR2_ROOTFS_POST_SCRIPT_ARGS) >> $$(FAKEROOT_SCRIPT)$$(sep))
fs: add pre- and post-command hooks In some cases, the directory structure we want in the filesystem is not exactly what we have in target/ For example, when systemd is used on a read-only rootfs, /var must be a tmpfs. However, we may have packages that install stuff in there, and set important rights (via the permission-table). So, at build time, we need /var to be a symlink to the remanent location (/usr/share/factory) while at runtime we need /var to be a directory. One option would have been to have /var as a real directory even during build time, and in a target-finalize hook, move everything out of there and into the "factory" location. However, that's not possible because it's too early: some packages may want to set ownership and/or acces rights on directories or files in /var, and this is only done in the fakeroot script, which is called only later during the assembling of the filesystem images. Also, there would have been no way to undo the tweak (i.e. we need to restore the /var symlink so that subsequent builds continue to work) if it were done as a target-finalize hook. The only solution is to allow packages to register pre- and post-hooks that are called right before and right after the rootfs commands are executed, and inside in the fakeroot script. We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature either because it is done before the filesystem command, but there is nothing that is done after. Also, we don't want to add to, and modify a user-supplied variable. So, we introduce two new variables that packages can set to add the commands they need to run to tweak the filesystem right at the last moment. Those hooks are not documented on-purpose; they are probably going to only ever be used by systemd. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-02 00:52:22 +02:00
$$(foreach hook,$$(ROOTFS_PRE_CMD_HOOKS),\
$$(call PRINTF,$$($$(hook))) >> $$(FAKEROOT_SCRIPT)$$(sep))
ifeq ($$(BR2_REPRODUCIBLE),y)
echo "find $$(TARGET_DIR) -print0 | xargs -0 -r touch -hd @$$(SOURCE_DATE_EPOCH)" >> $$(FAKEROOT_SCRIPT)
endif
$$(call PRINTF,$$(ROOTFS_$(2)_CMD)) >> $$(FAKEROOT_SCRIPT)
fs: add pre- and post-command hooks In some cases, the directory structure we want in the filesystem is not exactly what we have in target/ For example, when systemd is used on a read-only rootfs, /var must be a tmpfs. However, we may have packages that install stuff in there, and set important rights (via the permission-table). So, at build time, we need /var to be a symlink to the remanent location (/usr/share/factory) while at runtime we need /var to be a directory. One option would have been to have /var as a real directory even during build time, and in a target-finalize hook, move everything out of there and into the "factory" location. However, that's not possible because it's too early: some packages may want to set ownership and/or acces rights on directories or files in /var, and this is only done in the fakeroot script, which is called only later during the assembling of the filesystem images. Also, there would have been no way to undo the tweak (i.e. we need to restore the /var symlink so that subsequent builds continue to work) if it were done as a target-finalize hook. The only solution is to allow packages to register pre- and post-hooks that are called right before and right after the rootfs commands are executed, and inside in the fakeroot script. We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature either because it is done before the filesystem command, but there is nothing that is done after. Also, we don't want to add to, and modify a user-supplied variable. So, we introduce two new variables that packages can set to add the commands they need to run to tweak the filesystem right at the last moment. Those hooks are not documented on-purpose; they are probably going to only ever be used by systemd. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-02 00:52:22 +02:00
$$(foreach hook,$$(ROOTFS_POST_CMD_HOOKS),\
$$(call PRINTF,$$($$(hook))) >> $$(FAKEROOT_SCRIPT)$$(sep))
chmod a+x $$(FAKEROOT_SCRIPT)
rm -f $$(TARGET_DIR_WARNING_FILE)
PATH=$$(BR_PATH) $$(HOST_DIR)/bin/fakeroot -- $$(FAKEROOT_SCRIPT)
infra: consistently use double dollar signs inside inner-xxx-targets The inner-xxx-targets in the buildroot package infrastructures are evaluated using $(eval) which causes variable references to be a bit different than in regular make code. As we want most references to be expanded only at the time of the $(eval) we should not use standard references $(VAR) but rather use double dollar signs $$(VAR). This includes function references like $(call), $(subst), etc. The only exception is the reference to pkgdir/pkgname and numbered variables, which are parameters to the inner block: $(1), $(2), etc. This patch introduces consistent usage of double-dollar signs throughout the different inner-xxx-targets blocks. In some cases, this would potentially cause circular references, in particular when the value of HOST_FOO_VAR would be obtained from the corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test is added to check for a host package (the only case where such constructions are relevant; these are not circular). Benefits of these changes are: - behavior of variables is now again as expected. For example, setting $(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while originally it would cause very odd results. - The output of 'make printvars' is now much more useful. This target shows the value of all variables, and the expression that led to that value. However, if the expression was coming from an inner-xxx-targets block, and was using single dollar signs, it would show in printvars as VAR = value (value) while if double dollar signs are used, it would effectively look like VAR = value (actual expression) as is intended. This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME, FOO_SITE_METHOD and FOO_MAKE. The correctness of this patch has been verified using 'make printvars', 'make manual' and 'make legal-info' before and after applying this patch, and comparing the output. Insight-provided-by: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-06-11 21:12:24 +02:00
$$(INSTALL) -m 0644 support/misc/target-dir-warning.txt $$(TARGET_DIR_WARNING_FILE)
ifneq ($$(ROOTFS_$(2)_COMPRESS_CMD),)
infra: consistently use double dollar signs inside inner-xxx-targets The inner-xxx-targets in the buildroot package infrastructures are evaluated using $(eval) which causes variable references to be a bit different than in regular make code. As we want most references to be expanded only at the time of the $(eval) we should not use standard references $(VAR) but rather use double dollar signs $$(VAR). This includes function references like $(call), $(subst), etc. The only exception is the reference to pkgdir/pkgname and numbered variables, which are parameters to the inner block: $(1), $(2), etc. This patch introduces consistent usage of double-dollar signs throughout the different inner-xxx-targets blocks. In some cases, this would potentially cause circular references, in particular when the value of HOST_FOO_VAR would be obtained from the corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test is added to check for a host package (the only case where such constructions are relevant; these are not circular). Benefits of these changes are: - behavior of variables is now again as expected. For example, setting $(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while originally it would cause very odd results. - The output of 'make printvars' is now much more useful. This target shows the value of all variables, and the expression that led to that value. However, if the expression was coming from an inner-xxx-targets block, and was using single dollar signs, it would show in printvars as VAR = value (value) while if double dollar signs are used, it would effectively look like VAR = value (actual expression) as is intended. This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME, FOO_SITE_METHOD and FOO_MAKE. The correctness of this patch has been verified using 'make printvars', 'make manual' and 'make legal-info' before and after applying this patch, and comparing the output. Insight-provided-by: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-06-11 21:12:24 +02:00
PATH=$$(BR_PATH) $$(ROOTFS_$(2)_COMPRESS_CMD) $$@ > $$@$$(ROOTFS_$(2)_COMPRESS_EXT)
endif
$$(foreach hook,$$(ROOTFS_$(2)_POST_GEN_HOOKS),$$(call $$(hook))$$(sep))
rootfs-$(1)-show-depends:
@echo $$(ROOTFS_$(2)_DEPENDENCIES)
rootfs-$(1): $$(BINARIES_DIR)/rootfs.$(1)
.PHONY: rootfs-$(1) rootfs-$(1)-show-depends
ifeq ($$(BR2_TARGET_ROOTFS_$(2)),y)
TARGETS_ROOTFS += rootfs-$(1)
PACKAGES += $$(filter-out rootfs-%,$$(ROOTFS_$(2)_DEPENDENCIES))
endif
# Check for legacy POST_TARGETS rules
ifneq ($$(ROOTFS_$(2)_POST_TARGETS),)
$$(error Filesystem $(1) uses post-target rules, which are no longer supported.\
Update $(1) to use post-gen hooks instead)
endif
endef
# $(pkgname) also works well to return the filesystem name
rootfs = $(call inner-rootfs,$(pkgname),$(call UPPERCASE,$(pkgname)))
include $(sort $(wildcard fs/*/*.mk))