configs/stm32f429_disco: new configuration for STM32F429 Discovery board
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-15 23:02:19 +02:00
|
|
|
STM32F429 Discovery
|
|
|
|
|
===================
|
|
|
|
|
|
|
|
|
|
This tutorial describes how to use the predefined Buildroot
|
|
|
|
|
configuration for the STM32F429 Discovery evaluation platform.
|
|
|
|
|
|
2017-05-01 12:24:36 +02:00
|
|
|
Supported HW
|
|
|
|
|
------------
|
|
|
|
|
|
|
|
|
|
- STM32F429I-DISCO evaluation board
|
|
|
|
|
- STM32F429I-DISC1 evaluation board
|
|
|
|
|
|
configs/stm32f429_disco: new configuration for STM32F429 Discovery board
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-15 23:02:19 +02:00
|
|
|
Building
|
|
|
|
|
--------
|
|
|
|
|
|
|
|
|
|
make stm32f429_disco_defconfig
|
|
|
|
|
make
|
|
|
|
|
|
|
|
|
|
Wire the UART
|
|
|
|
|
-------------
|
|
|
|
|
|
|
|
|
|
Use a USB to TTL adapter, and connect:
|
|
|
|
|
|
|
|
|
|
- RX to PA9
|
|
|
|
|
- TX to PA10
|
|
|
|
|
- GND to one of the GND available on the board
|
|
|
|
|
|
|
|
|
|
The UART is configured at 115200.
|
|
|
|
|
|
|
|
|
|
Flashing
|
|
|
|
|
--------
|
|
|
|
|
|
2017-05-01 12:24:36 +02:00
|
|
|
./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \
|
|
|
|
|
{stm32f429discovery|stm32f429disc1}
|
configs/stm32f429_disco: new configuration for STM32F429 Discovery board
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-15 23:02:19 +02:00
|
|
|
|
|
|
|
|
It will flash the minimal bootloader, the Device Tree Blob, and the
|
|
|
|
|
kernel image which includes the root filesystem as initramfs.
|
