kumquat-buildroot/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch

507 lines
20 KiB
Diff
Raw Normal View History

diff -urN at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c
--- at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c 2007-03-28 16:05:09.000000000 +0200
+++ at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c 2007-08-14 23:20:24.000000000 +0200
@@ -47,7 +47,9 @@
#ifdef CFG_DATAFLASH
#include "../../include/dataflash.h"
#endif
-
+#ifdef CFG_FLASH
+#include "../../include/flash.h"
+#endif
static inline unsigned int get_cp15(void)
{
unsigned int value;
@@ -129,6 +131,10 @@
(MASTER_CLOCK * 7)/1000000); /* Refresh Timer Register */
#endif /* CFG_SDRAM */
+
+#ifdef CFG_FLASH
+ flash_hw_init();
+#endif
}
#endif /* CFG_HW_INIT */
@@ -221,7 +227,24 @@
}
#endif /* CFG_DATAFLASH */
+#ifdef CFG_FLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn flash_hw_init */
+/* \brief This function performs Flash HW initialization */
+/*------------------------------------------------------------------------------*/
+void flash_hw_init(void)
+{
+ /* Configure PIOs */
+ const struct pio_desc flash_pio[] = {
+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+ };
+
+ /* Configure the PIO controller */
+ pio_setup(flash_pio);
+}
+#endif /* CFG_FLASH */
#ifdef CFG_NANDFLASH
/*------------------------------------------------------------------------------*/
diff -urN at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h
--- at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h 1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h 2007-08-14 22:53:58.000000000 +0200
@@ -0,0 +1,88 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support - ROUSSET -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2006, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name : at91sam9260ek.h
+ * Object :
+ * Creation : NLe Jul 13th 2006
+ *-----------------------------------------------------------------------------
+ */
+#ifndef _AT91SAM9260EK_H
+#define _AT91SAM9260EK_H
+/* ******************************************************************* */
+/* PMC Settings */
+/* */
+/* The main oscillator is enabled as soon as possible in the c_startup */
+/* and MCK is switched on the main oscillator. */
+/* PLL initialization is done later in the hw_init() function */
+/* ******************************************************************* */
+#define MASTER_CLOCK (198656000/2)
+
+#define PLL_LOCK_TIMEOUT 1000000
+
+#define PLLA_SETTINGS 0x2060BF09
+#define PLLB_SETTINGS 0x10483F0E
+
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
+#define MCKR_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
+
+/* Flash settings - Use a default, which hopefully works for all AT91 chips */
+#include "smc0_setup.h"
+
+
+/* ******************************************************************* */
+/* BootStrap Settings */
+/* */
+/* ******************************************************************* */
+#define MACH_TYPE 0x44B /* AT91SAM9260-EK */
+
+#define IMG_ADDRESS 0x8000 /* Image Address in Flash */
+
+#if defined(IMG_SIZE)
+#warning "IMG_SIZE redefined"
+#else
+#define IMG_SIZE 0x38000 /* Image Size in Flash */
+#endif
+
+#if defined(JUMP_ADDR)
+#warning "JUMP_ADDR redefined"
+#else
+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
+#endif
+
+/* ******************************************************************* */
+/* Application Settings */
+/* ******************************************************************* */
+#define CFG_DEBUG
+#define CFG_FLASH
+#define CFG_SDRAM
+#define CFG_HW_INIT
+
+#endif /* _AT91SAM9260EK_H */
diff -urN at91bootstrap-2.3/crt0_gnu.S at91bootstrap-2.3.2/crt0_gnu.S
--- at91bootstrap-2.3/crt0_gnu.S 2006-12-05 11:27:24.000000000 +0100
+++ at91bootstrap-2.3.2/crt0_gnu.S 2007-08-14 23:23:49.000000000 +0200
@@ -84,6 +84,13 @@
_init_stack:
ldr sp,=TOP_OF_MEM
+/* Initialize the SMC BEFORE we change the clock */
+#ifdef CFG_FLASH
+ ldr r4, = smc0_hw_init
+ mov lr, pc
+ bx r4
+#endif
+
/* Test if main oscillator is enabled */
ldr r0,=AT91C_PMC_SR
ldr r1, [r0]
diff -urN at91bootstrap-2.3/driver/driver.mk at91bootstrap-2.3.2/driver/driver.mk
--- at91bootstrap-2.3/driver/driver.mk 2007-03-25 16:24:08.000000000 +0200
+++ at91bootstrap-2.3.2/driver/driver.mk 2007-08-14 21:17:53.000000000 +0200
@@ -1,10 +1,11 @@
# Makefile for AT91-Bootstrap drivers directory
-COBJS-y += driver/debug.o
-COBJS-y += driver/gpio.o
-COBJS-y += driver/pmc.o
-COBJS-y += driver/sdramc.o
-COBJS-y += driver/string.o
-COBJS-y += driver/udiv.o
-COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o
-COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o
+COBJS-y += driver/debug.o
+COBJS-y += driver/gpio.o
+COBJS-y += driver/pmc.o
+COBJS-y += driver/sdramc.o
+COBJS-y += driver/string.o
+COBJS-y += driver/udiv.o
+COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o
+COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o
+COBJS-$(CONFIG_FLASH) += driver/flash.o
diff -urN at91bootstrap-2.3/driver/flash.c at91bootstrap-2.3.2/driver/flash.c
--- at91bootstrap-2.3/driver/flash.c 1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/driver/flash.c 2007-08-14 23:20:29.000000000 +0200
@@ -0,0 +1,132 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support - ROUSSET -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2007, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name : flash.c
+ * Object : Flash High level functions
+ * Creation : USa Aug 14th 2007
+ *---------------------------------------------------------------------------
+*/
+
+#include "../include/part.h"
+#include "../include/main.h"
+#include "../include/flash.h"
+#include "../include/smc.h"
+#include <stdlib.h>
+
+#ifdef CFG_FLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn smc0_hw_init */
+/* \brief This function performs Static Memory Controller HW initialization */
+/* It should be executed BEFORE the slow clock is changed */
+/* WARNING: The C_Startup has done VERY LITTLE at this point */
+/*------------------------------------------------------------------------------*/
+void smc0_hw_init(void)
+{
+ /* The SMC is either clocked by the Slow clock or by MCLK
+ * MCLK is typically 100 MHz
+ */
+
+unsigned int setup0,pulse0,cycle0,mode0;
+
+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) |DATABUS_PULLUP_ON|MEMORY_VOLTAGE_3_3V , AT91C_BASE_CCFG + CCFG_EBICSA);
+
+ /* Check : SETUP + PULSE <= CYCLE ! */
+
+ setup0 =
+ ((NCS_READ_SETUP & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0]
+ ((NRD_SETUP & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0]
+ ((NCS_WR_SETUP & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0]
+ ((NWE_SETUP & 0x3F) << 0); // (128 * bit[5]) + bit[4:0]
+ writel(setup0, AT91C_BASE_SMC + SMC_SETUP0);
+
+ pulse0 =
+ ((NCS_READ_PULSE & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0]
+ ((NRD_PULSE & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0]
+ ((NCS_WR_PULSE & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0]
+ ((NWE_PULSE & 0x3F) << 0); // (128 * bit[5]) + bit[4:0]
+ writel(pulse0, AT91C_BASE_SMC + SMC_PULSE0);
+
+ cycle0 =
+ ((NRD_CYCLE & 0x1FF) << 16) | // (256 * bit[8:7]) + bit[6:0]
+ ((NWE_CYCLE & 0x1FF) << 0); // (256 * bit[8:7]) + bit[6:0]
+ writel(cycle0, AT91C_BASE_SMC + SMC_CYCLE0);
+
+ mode0 = (PS|PMEN|TDF_MODE|TDF_CYCLES|DBW|BAT|EXNW_MODE|WRITE_MODE|READ_MODE);
+ writel(mode0, AT91C_BASE_SMC + SMC_CTRL0);
+}
+
+/*------------------------------------------------------------------------------*/
+/* \fn flash_is_boot_valid */
+/* \brief Check that the first bytes of the buffer are valid ARM vectors */
+/*------------------------------------------------------------------------------*/
+static unsigned int flash_is_boot_valid(unsigned char *buffer)
+{
+ int i = 3;
+
+ /* Verify if the 28 first bytes of the sram correspond to ARM vectors
+ The sixth ARM vector contain the size of the code */
+ while(i < 28)
+ {
+ if (i != 23)
+ {
+ if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) )
+ return -1;
+ }
+ i+=4;
+ }
+
+ return 0;
+}
+
+/*------------------------------------------------------------------------------*/
+/* \fn load_flash */
+/* \brief This function loads flash content to specified address */
+/*------------------------------------------------------------------------------*/
+int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest)
+{
+ unsigned char *src, *dst;
+ src = (unsigned char *) img_addr;
+ dst = (unsigned char *) img_dest;
+
+ flash_hw_init();
+
+ if (flash_is_boot_valid((unsigned char*)img_addr))
+ return -1;
+
+ while (img_size > 0) {
+ *dst++ = *src++;
+ img_size--;
+ }
+ return 0;
+}
+
+#endif /* CFG_FLASH */
diff -urN at91bootstrap-2.3/include/AT91SAM9260_inc.h at91bootstrap-2.3.2/include/AT91SAM9260_inc.h
--- at91bootstrap-2.3/include/AT91SAM9260_inc.h 2006-12-05 11:27:20.000000000 +0100
+++ at91bootstrap-2.3.2/include/AT91SAM9260_inc.h 2007-08-14 23:05:19.000000000 +0200
@@ -463,7 +463,7 @@
#define AT91C_EBI_CS5A_SMC (0x0 << 5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC
#define AT91C_EBI_CS5A_CF (0x1 << 5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated.
#define AT91C_EBI_DBPUC (0x1 << 8) // (CCFG) Data Bus Pull-up Configuration
-
+#define AT91C_EBI_VDDIOMSEL (0x1 << 16)
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Peripheral DMA Controller
// *****************************************************************************
diff -urN at91bootstrap-2.3/include/flash.h at91bootstrap-2.3.2/include/flash.h
--- at91bootstrap-2.3/include/flash.h 1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/flash.h 2007-08-14 23:20:11.000000000 +0200
@@ -0,0 +1,41 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support - ROUSSET -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2007, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name : flash.h
+ * Object : ATMEL Flash Header File
+ * Creation : USa Aug 14th 2007
+ *---------------------------------------------------------------------------
+*/
+#ifndef _FLASH_H
+#define _FLASH_H
+extern void flash_hw_init(void);
+extern int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest);
+#endif
diff -urN at91bootstrap-2.3/include/smc0_setup.h at91bootstrap-2.3.2/include/smc0_setup.h
--- at91bootstrap-2.3/include/smc0_setup.h 1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/smc0_setup.h 2007-08-14 22:54:21.000000000 +0200
@@ -0,0 +1,32 @@
+/* ******************************************************************* */
+/* SMC0 Settings */
+/* We use this as a default for all */
+/* ******************************************************************* */
+
+#ifndef _SMC0_SETUP_H
+#define _SMC0_SETUP_H
+
+#define NCS_READ_SETUP _ns(10)
+#define NRD_SETUP _ns(20)
+#define NCS_WR_SETUP _ns(10)
+#define NWE_SETUP _ns(20)
+
+#define NCS_READ_PULSE _ns(100)
+#define NRD_PULSE _ns(100)
+#define NCS_WR_PULSE _ns(100)
+#define NWE_PULSE _ns(100)
+
+#define NRD_CYCLE _ns(140)
+#define NWE_CYCLE _ns(140)
+
+#define PS AT91C_SMC_PS_SIZE_SIXTEEN_BYTES
+#define PMEN PAGE_MODE_OFF
+#define TDF_MODE TDF_OPTIMIZATION_OFF
+#define TDF_CYCLES _ns(60)
+#define DBW AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS
+#define BAT AT91C_SMC_BAT_BYTE_SELECT
+#define EXNW_MODE AT91C_SMC_NWAITM_NWAIT_DISABLE
+#define WRITE_MODE CONTROLLED_BY_NWE
+#define READ_MODE CONTROLLED_BY_NRD
+
+#endif
diff -urN at91bootstrap-2.3/include/smc.h at91bootstrap-2.3.2/include/smc.h
--- at91bootstrap-2.3/include/smc.h 1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/smc.h 2007-08-14 23:05:30.000000000 +0200
@@ -0,0 +1,19 @@
+#define MASTER_CLOCK_CYCLE (1000000000/MASTER_CLOCK)
+#define _ns(x) ((x)/MASTER_CLOCK_CYCLE)
+
+#define CONTROLLED_BY_NRD AT91C_SMC_READMODE
+#define CONTROLLED_BY_NCS_RD 0
+#define CONTROLLED_BY_NWE AT91C_SMC_WRITEMODE
+#define CONTROLLED_BY_NCS_WR 0
+
+#define TDF_OPTIMIZATION_ON AT91C_SMC_TDFEN
+#define TDF_OPTIMIZATION_OFF 0
+
+#define PAGE_MODE_ON AT91C_SMC_PMEN
+#define PAGE_MODE_OFF 0
+
+#define DATABUS_PULLUP_ON 0
+#define DATABUS_PULLUP_OFF AT91C_EBI_DBPUC
+
+#define MEMORY_VOLTAGE_1_8V 0
+#define MEMORY_VOLTAGE_3_3V AT91C_EBI_VDDIOMSEL
diff -urN at91bootstrap-2.3/main.c at91bootstrap-2.3.2/main.c
--- at91bootstrap-2.3/main.c 2006-12-05 11:27:24.000000000 +0100
+++ at91bootstrap-2.3.2/main.c 2007-08-14 21:15:38.000000000 +0200
@@ -38,6 +38,7 @@
#include "include/main.h"
#include "include/debug.h"
#include "include/dataflash.h"
+#include "include/flash.h"
#include "include/nandflash.h"
/*------------------------------------------------------------------------------*/
@@ -60,6 +61,10 @@
load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
#endif
+#ifdef CFG_FLASH
+ load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
+#endif
+
/* Load from Nandflash in RAM */
#ifdef CFG_NANDFLASH
load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
diff -urN at91bootstrap-2.3/MAKEALL at91bootstrap-2.3.2/MAKEALL
--- at91bootstrap-2.3/MAKEALL 2007-04-09 19:47:20.000000000 +0200
+++ at91bootstrap-2.3.2/MAKEALL 2007-08-14 22:43:19.000000000 +0200
@@ -1,7 +1,7 @@
#!/bin/bash
-make toolchain
-source gcc-3.4.6-uclibc.sh
+#make toolchain
+source gcc-4.1.2-uclibc-external.sh
make distrib
make MEMORY=dataflashcard at91sam9260dfc_defconfig
make
@@ -9,6 +9,8 @@
make
make MEMORY=nandflash at91sam9260ek_defconfig
make
+make MEMORY=flash at91sam9260pf_defconfig
+make
make MEMORY=dataflash at91sam9261ek_defconfig
make
make MEMORY=nandflash at91sam9261ek_defconfig
diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.2/Makefile
--- at91bootstrap-2.3/Makefile 2007-08-14 23:53:42.000000000 +0200
+++ at91bootstrap-2.3.2/Makefile 2007-08-14 22:36:24.000000000 +0200
@@ -8,7 +8,7 @@
TOPDIR := $(CURDIR)
-VERSION:=2.3.1
+VERSION:=2.3.2
include .config
@@ -114,6 +114,15 @@
echo SPI_BOOT=SPI_BOOT_CS1 >> .config
echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config
+at91sam9260pf_defconfig: clean
+ echo BOARDNAME=at91sam9260pf > .config
+ echo BOARD=at91sam9260ek >> .config
+ echo PROJECT=$(MEMORY) >> .config
+ echo CONFIG_$(CFG_MEMORY)=y >> .config
+ echo SPI_MODE=$(CONFIG_SPI_MODE) >> .config
+ echo SPI_BOOT=SPI_BOOT_CS0 >> .config
+ echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config
+
at91sam9261ek_defconfig: clean
echo BOARDNAME=at91sam9261ek > .config
echo BOARD=at91sam9261ek >> .config