infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
################################################################################
|
|
|
|
# Kconfig package infrastructure
|
|
|
|
#
|
|
|
|
# This file implements an infrastructure that eases development of
|
|
|
|
# package .mk files for packages that use kconfig for configuration files.
|
|
|
|
# It is based on the generic-package infrastructure, and inherits all of its
|
|
|
|
# features.
|
|
|
|
#
|
|
|
|
# See the Buildroot documentation for details on the usage of this
|
|
|
|
# infrastructure.
|
|
|
|
#
|
|
|
|
################################################################################
|
|
|
|
|
|
|
|
################################################################################
|
|
|
|
# inner-kconfig-package -- generates the make targets needed to support a
|
|
|
|
# kconfig package
|
|
|
|
#
|
|
|
|
# argument 1 is the lowercase package name
|
|
|
|
# argument 2 is the uppercase package name, including a HOST_ prefix
|
|
|
|
# for host packages
|
|
|
|
# argument 3 is the uppercase package name, without the HOST_ prefix
|
|
|
|
# for host packages
|
|
|
|
# argument 4 is the type (target or host)
|
|
|
|
################################################################################
|
|
|
|
|
|
|
|
define inner-kconfig-package
|
|
|
|
|
|
|
|
# Call the generic package infrastructure to generate the necessary
|
|
|
|
# make targets.
|
|
|
|
# Note: this must be done _before_ attempting to use $$($(2)_DIR) in a
|
|
|
|
# dependency expression
|
|
|
|
$(call inner-generic-package,$(1),$(2),$(3),$(4))
|
|
|
|
|
|
|
|
# Default values
|
|
|
|
$(2)_KCONFIG_EDITORS ?= menuconfig
|
2014-09-27 21:32:47 +02:00
|
|
|
$(2)_KCONFIG_OPTS ?=
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
$(2)_KCONFIG_FIXUP_CMDS ?=
|
|
|
|
|
2015-02-03 15:21:41 +01:00
|
|
|
# The config file could be in-tree, so before depending on it the package should
|
|
|
|
# be extracted (and patched) first
|
|
|
|
$$($(2)_KCONFIG_FILE): | $(1)-patch
|
|
|
|
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
# The .config file is obtained by copying it from the specified source
|
|
|
|
# configuration file, after the package has been patched.
|
2015-02-03 15:21:42 +01:00
|
|
|
# Since the file could be a defconfig file it needs to be expanded to a
|
|
|
|
# full .config first. We use 'make oldconfig' because this can be safely
|
|
|
|
# done even when the package does not support defconfigs.
|
2015-02-03 15:21:41 +01:00
|
|
|
$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE)
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
$$(INSTALL) -m 0644 $$($(2)_KCONFIG_FILE) $$($(2)_DIR)/.config
|
2015-02-03 15:21:42 +01:00
|
|
|
@yes "" | $$($(2)_MAKE_ENV) $$(MAKE) -C $$($(2)_DIR) \
|
|
|
|
$$($(2)_KCONFIG_OPTS) oldconfig
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
|
|
|
|
# In order to get a usable, consistent configuration, some fixup may be needed.
|
|
|
|
# The exact rules are specified by the package .mk file.
|
|
|
|
$$($(2)_DIR)/.stamp_kconfig_fixup_done: $$($(2)_DIR)/.config
|
|
|
|
$$($(2)_KCONFIG_FIXUP_CMDS)
|
infra/pkg-kconfig: incorporate oldconfig call to avoid endless rebuilds
The configure step of the busybox package performs 'make oldconfig', which
causes the .config file to be updated. Thus, the .config file is more recent
than our stamp file .stamp_kconfig_fixup_done. On a subsequent build, our
dependency rules would kick in, and run the config fixup again, thus
kicking in the package's configure, build and install steps yet once
more, that, ad infinitum.
One solution is to modify kconfig-package to introduce an explicit touch of
the .kconfig_fixup_config_done stamp file, as post-configure hook.
Another solution, implemented by this patch, is to move the oldconfig call
from the package's .mk file to the kconfig-package infrastructure and make
sure it is done as part of the fixup commands. This way, the stamp file will
only be touched once, after the full fixup (including oldconfig) and no
endless rebuilds will occur.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-05 12:36:53 +02:00
|
|
|
@yes "" | $$($(2)_MAKE_ENV) $$(MAKE) -C $$($(2)_DIR) \
|
2014-09-27 21:32:47 +02:00
|
|
|
$$($(2)_KCONFIG_OPTS) oldconfig
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
$$(Q)touch $$@
|
|
|
|
|
|
|
|
# Before running configure, the configuration file should be present and fixed
|
|
|
|
$$($(2)_TARGET_CONFIGURE): $$($(2)_DIR)/.stamp_kconfig_fixup_done
|
|
|
|
|
2015-02-03 15:21:45 +01:00
|
|
|
# Only enable the foo-*config targets when the package is actually enabled.
|
|
|
|
# Note: the variable $(2)_KCONFIG_VAR is not related to the kconfig
|
|
|
|
# infrastructure, but defined by pkg-generic.mk. The generic infrastructure is
|
|
|
|
# already called above, so we can effectively use this variable.
|
|
|
|
ifeq ($$($$($(2)_KCONFIG_VAR)),y)
|
|
|
|
|
2015-04-08 19:08:34 +02:00
|
|
|
# FOO_KCONFIG_FILE is required
|
|
|
|
ifndef $(2)_KCONFIG_FILE
|
|
|
|
$$(error Internal error: no value specified for $(2)_KCONFIG_FILE)
|
|
|
|
endif
|
|
|
|
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
# Configuration editors (menuconfig, ...)
|
|
|
|
$$(addprefix $(1)-,$$($(2)_KCONFIG_EDITORS)): $$($(2)_DIR)/.stamp_kconfig_fixup_done
|
|
|
|
$$($(2)_MAKE_ENV) $$(MAKE) -C $$($(2)_DIR) \
|
2014-09-27 21:32:47 +02:00
|
|
|
$$($(2)_KCONFIG_OPTS) $$(subst $(1)-,,$$@)
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
rm -f $$($(2)_DIR)/.stamp_{kconfig_fixup_done,configured,built}
|
2015-02-03 15:21:44 +01:00
|
|
|
rm -f $$($(2)_DIR)/.stamp_{target,staging,images}_installed
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
|
2015-02-03 15:21:42 +01:00
|
|
|
$(1)-savedefconfig: $$($(2)_DIR)/.stamp_kconfig_fixup_done
|
|
|
|
$$($(2)_MAKE_ENV) $$(MAKE) -C $$($(2)_DIR) \
|
|
|
|
$$($(2)_KCONFIG_OPTS) savedefconfig
|
|
|
|
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
# Target to copy back the configuration to the source configuration file
|
2015-02-03 15:21:43 +01:00
|
|
|
# Even though we could use 'cp --preserve-timestamps' here, the separate
|
|
|
|
# cp and 'touch --reference' is used for symmetry with $(1)-update-defconfig.
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
$(1)-update-config: $$($(2)_DIR)/.stamp_kconfig_fixup_done
|
2015-02-03 15:21:43 +01:00
|
|
|
cp -f $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
|
|
|
|
touch --reference $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
|
2015-02-03 15:21:42 +01:00
|
|
|
# Note: make sure the timestamp of the stored configuration is not newer than
|
|
|
|
# the .config to avoid a useless rebuild. Note that, contrary to
|
|
|
|
# $(1)-update-config, the reference for 'touch' is _not_ the file from which
|
|
|
|
# we copy.
|
|
|
|
$(1)-update-defconfig: $(1)-savedefconfig
|
|
|
|
cp -f $$($(2)_DIR)/defconfig $$($(2)_KCONFIG_FILE)
|
|
|
|
touch --reference $$($(2)_DIR)/.config $$($(2)_KCONFIG_FILE)
|
|
|
|
|
2015-02-03 15:21:45 +01:00
|
|
|
endif # package enabled
|
|
|
|
|
infra: introduce a kconfig-package infrastructure
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-03 17:32:40 +02:00
|
|
|
endef # inner-kconfig-package
|
|
|
|
|
|
|
|
################################################################################
|
|
|
|
# kconfig-package -- the target generator macro for kconfig packages
|
|
|
|
################################################################################
|
|
|
|
|
|
|
|
kconfig-package = $(call inner-kconfig-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
|