NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5ae6077606
kumquat-buildroot/boot/at91dataflashboot/at91dataflashboot.mk

44 lines
1.4 KiB
Makefile
Raw Normal View History

Add AT91 targets
2007-07-17 14:19:56 +02:00
#############################################################
#
# DataFlashBoot
#
#############################################################
DATAFLASHBOOT_VERSION:=1.05
DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
target: use qstrip Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-07-30 17:35:13 +02:00
ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
Create a common BR2_COPYTO to prepare to replace all the different COPYTOs spread out all over Buildroot. Generate COPY_FILE subroutine which can be used to copy a file. $(COPY_FILE , file, directory, filename) This will copy to binary dir and to the selected copy dir if set in new config (intended to replace all old COPYTO configs) This is overridden by BUILDROOT_COPYTO, if set into the environment.
2009-01-27 00:52:31 +01:00
DATAFLASHBOOT_SITE:=$(ATMEL_MIRROR)
Add AT91 targets
2007-07-17 14:19:56 +02:00
DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
Remove the "project" feature The "project" feature was designed to allow to several projects to be built inside the same Buildroot source tree and allowing the toolchain and non-configurable packages to be shared between the different projects on the same architecture. While being interesting in theory, this feature adds a level of complexity to Buildroot, both from an user perspective and from a developer perspective, while one of the main Buildroot strengh is to be simple. Moreover, this feature is only seldomly used by our users. From a user-level perspective, this for example allows to remove the project_build_ARCH directory, which was very confusing. The autotools-stamps directory is also removed, since these stamps are back at their normal location. Description of the changes involved : * project/, directory removed * Makefile - Don't include project/Makefile.in and project/project.mk anymore - Grab a copy of the contents of project/Makefile.in at the location it was imported, but remove the definition related to PROJECT_BUILD_DIR. The TARGET_DIR is now in $(BUILD_DIR)/target_dir - Remove the creation/removal of the $(PROJECT_BUILD_DIR) and $(PROJECT_BUILD_DIR)/autotools-stamps directories - Don't make world depends on target-host-info. This target was defined by project/project.mk to customize /etc/issue, /etc/hostname and create /etc/br-version depending on the project definitions. We can of course imagine re-adding such a feature later. - Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere - Remove the update, log and lognr.$(PROJECT) target, they were specific to the project feature. * package/Makefile.autotools.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache - Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same directory as the other stamps (i.e, in the package directory). * package/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache * package/at/at.mk, package/busybox/busybox.mk, package/busybox/initramfs.mk, package/customize/customize.mk, package/linux-fusion/linux-fusion.mk, package/ltp-testsuite/ltp-testsuite.mk, package/nfs-utils/nfs-utils.mk, target/cpio/cpioroot.mk, target/cramfs/cramfs.mk, target/device/Atmel/DataFlashBoot/DataflashBoot.mk, target/device/Atmel/Makefile.in, target/device/Atmel/at91bootstrap/at91bootstrap.mk, target/device/KwikByte/Makefile.in, target/ext2/ext2root.mk, target/initramfs/initramfs.mk, target/iso9660/iso9660.mk, target/jffs2/jffs2root.mk, target/linux/Makefile.in, target/romfs/romfs.mk, target/squashfs/squashfsroot.mk, target/tar/tarroot.mk, target/ubifs/ubifsroot.mk - Replace PROJECT_BUILD_DIR by BUILD_DIR * target/device/Config.in - Do not include project/Config.in anymore * target/linux/Makefile.in.advanced - Replace PROJECT_BUILD_DIR by BUILD_DIR - Store the stamps file in $(STAMP_DIR) instead of $(PROJECT_BUILD_DIR)/autotools-stamps * target/u-boot/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR - Remove $(PROJECT) from the U-Boot target binary name - Remove the insertion in the configuration of the project name as the hostname - The u-boot-autoscript target now generates $(U_BOOT_AUTOSCRIPT).img instead of $(U_BOOT_AUTOSCRIPT).$(PROJECT) * toolchain/gcc/gcc-uclibc-3.x.mk toolchain/gcc/gcc-uclibc-4.x.mk - Move the stamps files to $(STAMP_DIR) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-05 15:49:30 +02:00
DATAFLASHBOOT_DIR:=$(BUILD_DIR)/$(DATAFLASHBOOT_NAME)
Add AT91 targets
2007-07-17 14:19:56 +02:00
DATAFLASHBOOT_BINARY:=$(DATAFLASHBOOT_NAME).bin
$(DL_DIR)/$(DATAFLASHBOOT_SOURCE):
target/: convert to DOWNLOAD helper
2009-01-16 12:48:43 +01:00
$(call DOWNLOAD,$(DATAFLASHBOOT_SITE),$(DATAFLASHBOOT_SOURCE))
Add AT91 targets
2007-07-17 14:19:56 +02:00
$(DATAFLASHBOOT_DIR)/.unpacked: $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
Remove the "project" feature The "project" feature was designed to allow to several projects to be built inside the same Buildroot source tree and allowing the toolchain and non-configurable packages to be shared between the different projects on the same architecture. While being interesting in theory, this feature adds a level of complexity to Buildroot, both from an user perspective and from a developer perspective, while one of the main Buildroot strengh is to be simple. Moreover, this feature is only seldomly used by our users. From a user-level perspective, this for example allows to remove the project_build_ARCH directory, which was very confusing. The autotools-stamps directory is also removed, since these stamps are back at their normal location. Description of the changes involved : * project/, directory removed * Makefile - Don't include project/Makefile.in and project/project.mk anymore - Grab a copy of the contents of project/Makefile.in at the location it was imported, but remove the definition related to PROJECT_BUILD_DIR. The TARGET_DIR is now in $(BUILD_DIR)/target_dir - Remove the creation/removal of the $(PROJECT_BUILD_DIR) and $(PROJECT_BUILD_DIR)/autotools-stamps directories - Don't make world depends on target-host-info. This target was defined by project/project.mk to customize /etc/issue, /etc/hostname and create /etc/br-version depending on the project definitions. We can of course imagine re-adding such a feature later. - Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere - Remove the update, log and lognr.$(PROJECT) target, they were specific to the project feature. * package/Makefile.autotools.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache - Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same directory as the other stamps (i.e, in the package directory). * package/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache * package/at/at.mk, package/busybox/busybox.mk, package/busybox/initramfs.mk, package/customize/customize.mk, package/linux-fusion/linux-fusion.mk, package/ltp-testsuite/ltp-testsuite.mk, package/nfs-utils/nfs-utils.mk, target/cpio/cpioroot.mk, target/cramfs/cramfs.mk, target/device/Atmel/DataFlashBoot/DataflashBoot.mk, target/device/Atmel/Makefile.in, target/device/Atmel/at91bootstrap/at91bootstrap.mk, target/device/KwikByte/Makefile.in, target/ext2/ext2root.mk, target/initramfs/initramfs.mk, target/iso9660/iso9660.mk, target/jffs2/jffs2root.mk, target/linux/Makefile.in, target/romfs/romfs.mk, target/squashfs/squashfsroot.mk, target/tar/tarroot.mk, target/ubifs/ubifsroot.mk - Replace PROJECT_BUILD_DIR by BUILD_DIR * target/device/Config.in - Do not include project/Config.in anymore * target/linux/Makefile.in.advanced - Replace PROJECT_BUILD_DIR by BUILD_DIR - Store the stamps file in $(STAMP_DIR) instead of $(PROJECT_BUILD_DIR)/autotools-stamps * target/u-boot/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR - Remove $(PROJECT) from the U-Boot target binary name - Remove the insertion in the configuration of the project name as the hostname - The u-boot-autoscript target now generates $(U_BOOT_AUTOSCRIPT).img instead of $(U_BOOT_AUTOSCRIPT).$(PROJECT) * toolchain/gcc/gcc-uclibc-3.x.mk toolchain/gcc/gcc-uclibc-4.x.mk - Move the stamps files to $(STAMP_DIR) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-05 15:49:30 +02:00
mkdir -p $(BUILD_DIR)
Add AT91 targets
2007-07-17 14:19:56 +02:00
ls $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
Remove the "project" feature The "project" feature was designed to allow to several projects to be built inside the same Buildroot source tree and allowing the toolchain and non-configurable packages to be shared between the different projects on the same architecture. While being interesting in theory, this feature adds a level of complexity to Buildroot, both from an user perspective and from a developer perspective, while one of the main Buildroot strengh is to be simple. Moreover, this feature is only seldomly used by our users. From a user-level perspective, this for example allows to remove the project_build_ARCH directory, which was very confusing. The autotools-stamps directory is also removed, since these stamps are back at their normal location. Description of the changes involved : * project/, directory removed * Makefile - Don't include project/Makefile.in and project/project.mk anymore - Grab a copy of the contents of project/Makefile.in at the location it was imported, but remove the definition related to PROJECT_BUILD_DIR. The TARGET_DIR is now in $(BUILD_DIR)/target_dir - Remove the creation/removal of the $(PROJECT_BUILD_DIR) and $(PROJECT_BUILD_DIR)/autotools-stamps directories - Don't make world depends on target-host-info. This target was defined by project/project.mk to customize /etc/issue, /etc/hostname and create /etc/br-version depending on the project definitions. We can of course imagine re-adding such a feature later. - Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere - Remove the update, log and lognr.$(PROJECT) target, they were specific to the project feature. * package/Makefile.autotools.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache - Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same directory as the other stamps (i.e, in the package directory). * package/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache * package/at/at.mk, package/busybox/busybox.mk, package/busybox/initramfs.mk, package/customize/customize.mk, package/linux-fusion/linux-fusion.mk, package/ltp-testsuite/ltp-testsuite.mk, package/nfs-utils/nfs-utils.mk, target/cpio/cpioroot.mk, target/cramfs/cramfs.mk, target/device/Atmel/DataFlashBoot/DataflashBoot.mk, target/device/Atmel/Makefile.in, target/device/Atmel/at91bootstrap/at91bootstrap.mk, target/device/KwikByte/Makefile.in, target/ext2/ext2root.mk, target/initramfs/initramfs.mk, target/iso9660/iso9660.mk, target/jffs2/jffs2root.mk, target/linux/Makefile.in, target/romfs/romfs.mk, target/squashfs/squashfsroot.mk, target/tar/tarroot.mk, target/ubifs/ubifsroot.mk - Replace PROJECT_BUILD_DIR by BUILD_DIR * target/device/Config.in - Do not include project/Config.in anymore * target/linux/Makefile.in.advanced - Replace PROJECT_BUILD_DIR by BUILD_DIR - Store the stamps file in $(STAMP_DIR) instead of $(PROJECT_BUILD_DIR)/autotools-stamps * target/u-boot/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR - Remove $(PROJECT) from the U-Boot target binary name - Remove the insertion in the configuration of the project name as the hostname - The u-boot-autoscript target now generates $(U_BOOT_AUTOSCRIPT).img instead of $(U_BOOT_AUTOSCRIPT).$(PROJECT) * toolchain/gcc/gcc-uclibc-3.x.mk toolchain/gcc/gcc-uclibc-4.x.mk - Move the stamps files to $(STAMP_DIR) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-05 15:49:30 +02:00
$(BZCAT) $(DL_DIR)/$(DATAFLASHBOOT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
Add AT91 targets
2007-07-17 14:19:56 +02:00
touch $(DATAFLASHBOOT_DIR)/.unpacked
$(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY): $(DATAFLASHBOOT_DIR)/.unpacked
ls $(DATAFLASHBOOT_DIR)/.unpacked
make -C $(DATAFLASHBOOT_DIR) CROSS_COMPILE=$(TARGET_CROSS)
DataflashBoot-clean:
make -C $(DATAFLASHBOOT_DIR) clean
DataflashBoot-dirclean:
rm -rf $(DATAFLASHBOOT_DIR)
updates and additions for avr32 arch
2008-03-06 19:59:14 +01:00
dataflash: $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY)
boot: remove references to COPYTO Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-03-14 18:25:25 +01:00
cp $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY) $(BINARIES_DIR)
Add AT91 targets
2007-07-17 14:19:56 +02:00
#############################################################
#
# Toplevel Makefile options
#
#############################################################
target/: get rid of unneeded $(strip ..)
2008-12-08 09:15:58 +01:00
ifeq ($(BR2_TARGET_DATAFLASHBOOT),y)
Add AT91 targets
2007-07-17 14:19:56 +02:00
TARGETS+=dataflash
endif
Reference in New Issue Copy Permalink