kumquat-buildroot/configs/openblocks_a6_defconfig

# Architecture
BR2_arm=y
BR2_arm926t=y

# system
BR2_TARGET_GENERIC_HOSTNAME="openblocks-a6"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_SYSTEM_DHCP="eth0"

# filesystem
BR2_TARGET_ROOTFS_JFFS2=y
BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_16K=y

# Linux headers same as kernel, a 4.14 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.13"
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v5"
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
BR2_LINUX_KERNEL_INTREE_DTS_NAME="kirkwood-openblocks_a6"
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00			`# Architecture`
			`BR2_arm=y`
			`BR2_arm926t=y`

			`# system`
			`BR2_TARGET_GENERIC_HOSTNAME="openblocks-a6"`
			`BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"`
openblocks_a6_defconfig: improve/fix configuration The board has an ethernet interface, so enable DHCP for it. The used flash chip uses 16K erase blocks, so use that for JFFS2: mtdinfo -a .. mtd5 Name: user Type: nand Eraseblock size: 16384 bytes, 16.0 KiB Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB) Minimum input/output unit size: 512 bytes Sub-page size: 256 bytes OOB size: 16 bytes Character device major/minor: 90:10 Bad blocks are allowed: true Device is writable: true While we're at it, add a readme explaining how to build and upload the build to the board. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2017-06-16 16:41:44 +02:00			`BR2_SYSTEM_DHCP="eth0"`
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00
			`# filesystem`
			`BR2_TARGET_ROOTFS_JFFS2=y`
openblocks_a6_defconfig: improve/fix configuration The board has an ethernet interface, so enable DHCP for it. The used flash chip uses 16K erase blocks, so use that for JFFS2: mtdinfo -a .. mtd5 Name: user Type: nand Eraseblock size: 16384 bytes, 16.0 KiB Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB) Minimum input/output unit size: 512 bytes Sub-page size: 256 bytes OOB size: 16 bytes Character device major/minor: 90:10 Bad blocks are allowed: true Device is writable: true While we're at it, add a readme explaining how to build and upload the build to the board. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2017-06-16 16:41:44 +02:00			`BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_16K=y`
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00
configs/openblocks_a6_defconfig: bump linux kernel to 4.14.13 Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2018-01-14 23:02:56 +01:00			`# Linux headers same as kernel, a 4.14 series`
			`BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y`
openblocks_a6_defconfig: bump to 3.14.3 kernel And lock kernel headers to match. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2014-05-08 16:26:14 +02:00
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00			`# kernel`
			`BR2_LINUX_KERNEL=y`
			`BR2_LINUX_KERNEL_CUSTOM_VERSION=y`
configs/openblocks_a6_defconfig: bump linux kernel to 4.14.13 Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2018-01-14 23:02:56 +01:00			`BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.13"`
defconfigs: bump openblocks a6 kernel to 3.18.1 And move to mvebu_v5_defconfig as kirkwood has been merged with mvebu since 3.17. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2015-01-01 23:02:17 +01:00			`BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v5"`
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00			`BR2_LINUX_KERNEL_APPENDED_UIMAGE=y`
defconfigs: bump openblocks a6 kernel to 3.18.1 And move to mvebu_v5_defconfig as kirkwood has been merged with mvebu since 3.17. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2015-01-01 23:02:17 +01:00			`BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"`
configs: add basic defconfig for openblocks a6 For details, see http://openblocks.plathome.com/products/a6/ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> 2013-05-08 15:30:52 +02:00			`BR2_LINUX_KERNEL_INTREE_DTS_NAME="kirkwood-openblocks_a6"`