libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
From 2140db697c7f1da2a0a3f7bbcb14c1a0dade84e5 Mon Sep 17 00:00:00 2001
|
2019-07-01 18:30:29 +02:00
|
|
|
From: Adam Duskett <aduskett@gmail.com>
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
Date: Mon, 9 Oct 2017 16:28:12 -0400
|
|
|
|
|
Subject: [PATCH] Add support for static-only build
|
2014-02-20 14:32:50 +01:00
|
|
|
|
|
|
|
|
Instead of unconditionally building shared libraries, this patch
|
|
|
|
|
improves the libsepol build system with a "STATIC" variable, which
|
|
|
|
|
when defined to some non-empty value, will disable the build of shared
|
|
|
|
|
libraries. It allows to support cases where the target architecture
|
|
|
|
|
does not have support for shared libraries.
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
2019-07-01 18:30:29 +02:00
|
|
|
Signed-off-by: Adam Duskett <aduskett@gmail.com>
|
2018-10-11 21:37:01 +02:00
|
|
|
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
|
|
|
|
|
[Update for 2.8]
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
---
|
|
|
|
|
src/Makefile | 13 ++++++++++---
|
|
|
|
|
1 file changed, 10 insertions(+), 3 deletions(-)
|
2016-06-27 00:39:12 +02:00
|
|
|
|
2018-01-16 09:22:18 +01:00
|
|
|
diff -durNw libsepol-2.7.orig/src/Makefile libsepol-2.7/src/Makefile
|
|
|
|
|
--- libsepol-2.7.orig/src/Makefile 2018-01-15 21:07:51.285183415 +0100
|
|
|
|
|
+++ libsepol-2.7/src/Makefile 2018-01-15 21:08:56.515182717 +0100
|
|
|
|
|
@@ -39,7 +39,12 @@
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
LN=gln
|
2016-06-27 00:39:12 +02:00
|
|
|
endif
|
2014-02-20 14:32:50 +01:00
|
|
|
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
-all: $(LIBA) $(LIBSO) $(LIBPC)
|
2014-02-20 14:32:50 +01:00
|
|
|
+ALL_TARGETS = $(LIBA) $(LIBPC)
|
|
|
|
|
+ifeq ($(STATIC),)
|
|
|
|
|
+ALL_TARGETS += $(LIBSO)
|
|
|
|
|
+endif
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
+
|
2014-02-20 14:32:50 +01:00
|
|
|
+all: $(ALL_TARGETS)
|
|
|
|
|
|
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-10-18 00:32:16 +02:00
|
|
|
|
2014-02-20 14:32:50 +01:00
|
|
|
$(LIBA): $(OBJS)
|
2018-01-16 09:22:18 +01:00
|
|
|
@@ -81,8 +86,10 @@
|
2016-08-05 11:44:36 +02:00
|
|
|
install: all
|
2018-10-11 21:37:01 +02:00
|
|
|
test -d $(DESTDIR)$(LIBDIR) || install -m 755 -d $(DESTDIR)$(LIBDIR)
|
|
|
|
|
install -m 644 $(LIBA) $(DESTDIR)$(LIBDIR)
|
2014-02-20 14:32:50 +01:00
|
|
|
+ifeq ($(STATIC),)
|
2018-10-11 21:37:01 +02:00
|
|
|
test -d $(DESTDIR)$(SHLIBDIR) || install -m 755 -d $(DESTDIR)$(SHLIBDIR)
|
|
|
|
|
install -m 755 $(LIBSO) $(DESTDIR)$(SHLIBDIR)
|
2014-02-20 14:32:50 +01:00
|
|
|
+endif
|
2018-10-11 21:37:01 +02:00
|
|
|
test -d $(DESTDIR)$(LIBDIR)/pkgconfig || install -m 755 -d $(DESTDIR)$(LIBDIR)/pkgconfig
|
|
|
|
|
install -m 644 $(LIBPC) $(DESTDIR)$(LIBDIR)/pkgconfig
|
|
|
|
|
$(LN) -sf --relative $(DESTDIR)$(SHLIBDIR)/$(LIBSO) $(DESTDIR)$(LIBDIR)/$(TARGET)
|
