NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
483b1105fd
kumquat-buildroot/configs/olimex_a20_olinuxino_lime2_defconfig

61 lines
1.8 KiB
Plaintext
Raw Normal View History

olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# Architecture
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_EABIHF=y
configs/olimex_a20_olinuxino_lime2: use NEON+VFPv4 as FPU strategy Allwinner A20 supports NEON+VFPv4 so let's enable instead of the default VFPv4-D16. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-10-05 02:53:45 +02:00
BR2_ARM_FPU_NEON_VFPV4=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-04-04 20:35:04 +02:00
# Linux headers same as kernel, a 5.15 LTS series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
configs/olimex_a20_olinuxino_lime{, 2}_defconfig: use a glibc toolchain Since 2e71b396a171594d5b913d8b8c11079d376198ed, this defconfig needs a glibc toolchain to select sunxi-mali-mainline package. Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-04-21 19:26:43 +02:00
# Toolchain
package/sunxi-mali-utgard: rename from sunxi-mali-mainline This package provides Mali libraries for Sunxi Mali Utgard GPUs. The trailing -mainline is historical and was used at a time when there was two packages providing these libraries. The "non-upstream" package has been removed some time ago so before adding new packages bringing support for other ARM Mali GPU versions or implementations, rename sunxi-mali-mainline into sunxi-mali-utgard. Add a legacy entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> [Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in sunxi-mali-mainline-driver/Config.in to respect bisectability] Tested-by: Luca Ceresoli <luca@lucaceresoli.net> [Build tested only] Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> [Arnout: also update existing select in Config.in.legacy] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-11-05 23:17:56 +01:00
# glibc is needed for sunxi-mali-utgard package.
configs/olimex_a20_olinuxino_lime{, 2}_defconfig: use a glibc toolchain Since 2e71b396a171594d5b913d8b8c11079d376198ed, this defconfig needs a glibc toolchain to select sunxi-mali-mainline package. Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-04-21 19:26:43 +02:00
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# System configuration
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!"
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
BR2_TARGET_GENERIC_GETTY=y
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
configs/olimex_a20_olinuxino: switch to extlinux.conf a10_olinuxino is not switched to extlinux.conf, so the broken symlinks are replaced by the previous content from a20_olinuxino. Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-07-20 06:36:07 +02:00
BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay"
olimex_a20: refactor with genimage.sh Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-01 21:37:04 +02:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# Kernel
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-04-04 20:35:04 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.32"
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
configs/olimex_a20_olinuxino_lime2_defconfig: use linux-disable-lima.fragment This defconfig enables sunxi-mali-mainline-driver so we need to disable Lima in Linux to prevent Mali to not load. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-11-05 23:17:59 +01:00
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment"
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-olinuxino-lime2"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
configs/olimex_a20_olinuxino_lime*: add some sunxi packages - sunxi mali mainline - sunxi tools like in olimex_a20_olinuxino_lime_legacy. Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-21 08:29:01 +01:00
# sunxi packages
BR2_PACKAGE_SUNXI_TOOLS=y
package/sunxi-mali-utgard: rename from sunxi-mali-mainline This package provides Mali libraries for Sunxi Mali Utgard GPUs. The trailing -mainline is historical and was used at a time when there was two packages providing these libraries. The "non-upstream" package has been removed some time ago so before adding new packages bringing support for other ARM Mali GPU versions or implementations, rename sunxi-mali-mainline into sunxi-mali-utgard. Add a legacy entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> [Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in sunxi-mali-mainline-driver/Config.in to respect bisectability] Tested-by: Luca Ceresoli <luca@lucaceresoli.net> [Build tested only] Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> [Arnout: also update existing select in Config.in.legacy] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-11-05 23:17:56 +01:00
BR2_PACKAGE_SUNXI_MALI_UTGARD=y
package/sunxi-mali-utgard-driver: rename from sunxi-mali-mainline-driver This package provides a Mali kernel driver for Sunxi Mali Utgard GPUs. The trailing -mainline is historical and was used at a time when there was two packages providing this driver. The "non-upstream" package has been removed some time ago so before adding new packages bringing support for other ARM Mali GPU versions or implementations, rename sunxi-mali-mainline-driver into sunxi-mali-utgard-driver. Add a legacy entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> [Giulio: rebase on master. Add legacy entry instead of substituting the blob's one] Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-11-05 23:17:57 +01:00
BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER=y
configs/olimex_a20_olinuxino_lime*: add some sunxi packages - sunxi mali mainline - sunxi tools like in olimex_a20_olinuxino_lime_legacy. Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-21 08:29:01 +01:00
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# Filesystem
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# Bootloaders
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_UBOOT=y
olimex_a20_olinuxino_lime2_defconfig: correct u-boot configuration This defconfig currently doesn't build: https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616951 As u-boot needs dtc, so add that and change to kconfig mode like on our other allwinner defconfigs as that is in fact what is used. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-12-21 22:16:21 +01:00
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-04-04 20:35:04 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04"
olimex_a20_olinuxino_lime2_defconfig: correct u-boot configuration This defconfig currently doesn't build: https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616951 As u-boot needs dtc, so add that and change to kconfig mode like on our other allwinner defconfigs as that is in fact what is used. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-12-21 22:16:21 +01:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
configs/olimex_a20_olinuxino_lime{, 2}: use Python 3.x The olimex_a20_olinuxino_lime{,2}_defconfig uses U-Boot 2020.04 since commit 6b805c3ab70b5ee63c7dcd3a4aa48a999a8a43c3. This new U-Boot version needs Python 3.x for pylibfdt. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/535054468 https://gitlab.com/buildroot.org/buildroot/-/jobs/535054466 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2020-05-02 23:28:09 +02:00
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
configs/olimex_a20_olinuxino_lime2: uboot 2021.10 needs openssl Uboot 2021.10 needs openssl so enable it. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1723730017 Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-31 01:46:47 +02:00
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
BR2_TARGET_UBOOT_FORMAT_BIN=y
olimex_a20_olinuxino_lime2: new board It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps. [Thomas: remove ccache and optimize 2 options.] Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Acked-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-08-17 18:01:45 +02:00
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
defconfigs: use BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_ For defconfigs that create a boot script, add the host package uboot-tools and update the script variable names. Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that are not manually formatted (i.e. just the result of 'make savedefconfig'), this puts them in the wrong place. However, it's easier this way, and it's more consistent in general to have the definition of the script close to BR2_TARGET_UBOOT itself. Special cases: - nanopi_* had the definition of the _SCRIPT variable in a weird place. These are moved to close to BR2_TARGET_UBOOT. - Same for orangepi_plus. - orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not added there. Related to db2b6841263c3062fa1661dcfda3110415779fa2 Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2020-10-07 15:20:51 +02:00
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
olimex_a20_olinuxino_lime2: bump versions (aligned with olimex_a20_olinuxino_lime) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-11-11 10:14:23 +01:00
# Additional tools
olimex_a20_olinuxino_lime2: update to use genimage Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-23 01:24:32 +01:00
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink