NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
4683a6a479
kumquat-buildroot/configs/nitrogen6sx_defconfig

45 lines
1.5 KiB
Plaintext
Raw Normal View History

configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
# architecture
BR2_arm=y
BR2_cortex_a9=y
configs: nitrogen*: enable VFP and NEON support Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-16 19:18:32 +02:00
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_FPU_VFPV3=y
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
# system
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
board/boundarydevices: rename folder and update readme It didn't make sense to keep the U-Boot scripts and post build/image scripts under the nitrogen6x folder since they apply for all our platforms. Also update the readme.txt to make it clearer which defconfig should be used depending on the platform targeted. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-03 15:57:18 +01:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/common/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh"
configs/nitrogen6*: update to use genimage Also updating the documentation with the dd instruction to flash the bootable media. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-01-31 20:41:53 +01:00
BR2_PACKAGE_HOST_GENIMAGE=y
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
# filesystem
BR2_TARGET_ROOTFS_EXT2=y
configs/nitrogen6*: update to use genimage Also updating the documentation with the dd instruction to flash the bootable media. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-01-31 20:41:53 +01:00
BR2_TARGET_ROOTFS_EXT2_4=y
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
configs/nitrogen*: bump kernel version to 5.4.x_2.1.0 - based on NXP imx_5.4.24_2.1.0 release - includes latest stable releases, hence 5.4.x naming - includes support for all Boundary Devices platforms + accessories Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-16 16:29:22 +02:00
# Linux headers same as kernel, a 5.4 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
# bootloader
BR2_TARGET_UBOOT=y
configs: nitrogen*: bump u-boot version to 2017.07 Also include new boot scripts to match standard distro uboot commands. Our previous 6x_bootscript and 6x_upgrade used custom variables and their naming don't make sense now that we target more than i.MX6 CPU. Therefore those old scripts are marked as legacy and kept for now but the goal is to deprecate and remove them later. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-05 15:39:47 +01:00
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
configs/nitrogen*: bump u-boot to version 2020.10 - U-Boot branch boundary-imx_v2020.10 from our repo - Also bump ATF to boundary-imx_5.4.47_2.2.0 for i.MX8* Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-12-29 22:40:52 +01:00
# Last version of branch boundary-v2020.10
BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/e27d3240.tar.gz"
configs: nitrogen*: bump u-boot version to 2017.07 Also include new boot scripts to match standard distro uboot commands. Our previous 6x_bootscript and 6x_upgrade used custom variables and their naming don't make sense now that we target more than i.MX6 CPU. Therefore those old scripts are marked as legacy and kept for now but the goal is to deprecate and remove them later. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2018-01-05 15:39:47 +01:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6sx"
BR2_TARGET_UBOOT_FORMAT_IMX=y
defconfigs: use BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_ For defconfigs that create a boot script, add the host package uboot-tools and update the script variable names. Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that are not manually formatted (i.e. just the result of 'make savedefconfig'), this puts them in the wrong place. However, it's easier this way, and it's more consistent in general to have the definition of the script close to BR2_TARGET_UBOOT itself. Special cases: - nanopi_* had the definition of the _SCRIPT variable in a weird place. These are moved to close to BR2_TARGET_UBOOT. - Same for orangepi_plus. - orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not added there. Related to db2b6841263c3062fa1661dcfda3110415779fa2 Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2020-10-07 15:20:51 +02:00
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/boundarydevices/common/boot.cmd"
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
configs/nitrogen*: update kernel to 5.4.x_2.2.0 - Based upon NXP 5.4.47_2.2.0 release - Integrated stable fixes up to 5.4.80 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-12-29 22:40:51 +01:00
# Last version of branch boundary-imx_5.4.x_2.2.0
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/388bebee.tar.gz"
nitrogen6*_defconfig: bump u-boot and kernel revisions This update brings several improvements such as: - switch to a generic Boundary defconfig - same across all the Boundary Devices platforms - support of HDMI to MIPI daugther board https://boundarydevices.com/product/bd_hdmi_mipi/ - enhanced display support - LCD ASIT500MA6F5D - LCD A030JN01 - HDMI 480p For a complete list of changes: https://github.com/boundarydevices/linux-imx6/commits/d7a412b https://github.com/boundarydevices/u-boot-imx6/commits/a4070a8 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-19 17:02:34 +02:00
BR2_LINUX_KERNEL_DEFCONFIG="boundary"
configs: add nitrogen6sx_defconfig for Boundary Devices SoloX board This board is using the exact same kernel and u-boot revision as the Nitrogen6x. They also share the same u-boot "autoboot" script. The differences between the two configurations are: - getty port is ttymxc0 instead of ttymxc1 - uImage load address is 0x80008000 - different device tree http://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-09-11 12:00:09 +02:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs: nitrogen*: bump kernel and u-boot version for m4 support Also adding the '-m4' device tree blobs which allow to disable the peripherals that are used by the Cortex-M4. The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled u-boot variable is set to 1. The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here: https://github.com/boundarydevices/freertos-boundary Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-08-03 19:09:49 +02:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-nitrogen6sx imx6sx-nitrogen6sx-m4"
configs/nitrogen6sx: Linux needs host-openssl The kernel configuration used for the nitrogen6x defconfig needs host-openssl. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/674934095 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-08-08 19:57:35 +02:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
Reference in New Issue Copy Permalink