NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3e546fa328
kumquat-buildroot/configs/pc_x86_64_bios_defconfig

63 lines
1.8 KiB
Plaintext
Raw Normal View History

configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Architecture
BR2_x86_64=y
# Toolchain, required for eudev (to autoload drivers)
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# System
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Required tools to create bootable media
BR2_PACKAGE_HOST_GENIMAGE=y
# Bootloader
BR2_TARGET_GRUB2=y
# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
configs/qemu: bump to the latest kernel version Drop m68k-mcf5208 kernel patch since it's upstream. Also bump the pc samples since they're tied to the (base) qemu config. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.8.1 2.6.0 YES OK (3) arm_versatile 4.8.1 2.5.0 YES OK arm_vexpress 4.8.1 2.5.0 YES OK m68k_mcf5208 4.8.1 2.5.0 YES OK m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK microblazebe 4.8.1 2.5.0 YES OK microblazeel 4.8.1 2.5.0 YES OK mips32r2el_malta 4.8.1 2.5.0 YES OK mips32r2_malta 4.8.1 2.5.0 YES OK mips32r6el_malta 4.8.1 2.6.0 YES OK (3) mips32r6_malta 4.8.1 2.6.0 YES OK (3) mips64el_malta 4.8.1 2.5.0 YES OK mips64_malta 4.8.1 2.5.0 YES OK mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4) mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4) ppc_g3beige 4.8.1 2.5.0 YES OK ppc_mpc8544ds 4.8.1 2.5.0 YES OK ppc_virtex_ml507 4.8.1 2.5.0 NO OK ppc64_pseries 4.8.1 2.5.0 YES OK sh4 4.8.1 2.5.0 YES OK sh4eb 4.8.1 2.5.0 NO (1) OK sparc_ss10 4.8.1 2.5.0 YES OK sparc64_sun4u 4.8.1 2.5.0 YES OK sparc_sun4u 4.8.1 2.5.0 YES OK x86 4.8.1 2.5.0 YES OK x86_64 4.8.1 2.5.0 YES OK xtensa_lx60 4.8.1 2.6.0 YES OK xtensa_lx60_nommu 4.8.1 2.6.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Known to fail with qemu versions lower than 2.6.0 (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0 Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-13 15:02:48 +02:00
# Linux headers same as kernel, a 4.8 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/qemu: bump to the latest kernel version Drop m68k-mcf5208 kernel patch since it's upstream. Also bump the pc samples since they're tied to the (base) qemu config. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.8.1 2.6.0 YES OK (3) arm_versatile 4.8.1 2.5.0 YES OK arm_vexpress 4.8.1 2.5.0 YES OK m68k_mcf5208 4.8.1 2.5.0 YES OK m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK microblazebe 4.8.1 2.5.0 YES OK microblazeel 4.8.1 2.5.0 YES OK mips32r2el_malta 4.8.1 2.5.0 YES OK mips32r2_malta 4.8.1 2.5.0 YES OK mips32r6el_malta 4.8.1 2.6.0 YES OK (3) mips32r6_malta 4.8.1 2.6.0 YES OK (3) mips64el_malta 4.8.1 2.5.0 YES OK mips64_malta 4.8.1 2.5.0 YES OK mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4) mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4) ppc_g3beige 4.8.1 2.5.0 YES OK ppc_mpc8544ds 4.8.1 2.5.0 YES OK ppc_virtex_ml507 4.8.1 2.5.0 NO OK ppc64_pseries 4.8.1 2.5.0 YES OK sh4 4.8.1 2.5.0 YES OK sh4eb 4.8.1 2.5.0 NO (1) OK sparc_ss10 4.8.1 2.5.0 YES OK sparc64_sun4u 4.8.1 2.5.0 YES OK sparc_sun4u 4.8.1 2.5.0 YES OK x86 4.8.1 2.5.0 YES OK x86_64 4.8.1 2.5.0 YES OK xtensa_lx60 4.8.1 2.6.0 YES OK xtensa_lx60_nommu 4.8.1 2.6.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Known to fail with qemu versions lower than 2.6.0 (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0 Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-13 15:02:48 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
configs/qemu: bump to the latest kernel version Drop m68k-mcf5208 kernel patch since it's upstream. Also bump the pc samples since they're tied to the (base) qemu config. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.8.1 2.6.0 YES OK (3) arm_versatile 4.8.1 2.5.0 YES OK arm_vexpress 4.8.1 2.5.0 YES OK m68k_mcf5208 4.8.1 2.5.0 YES OK m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK microblazebe 4.8.1 2.5.0 YES OK microblazeel 4.8.1 2.5.0 YES OK mips32r2el_malta 4.8.1 2.5.0 YES OK mips32r2_malta 4.8.1 2.5.0 YES OK mips32r6el_malta 4.8.1 2.6.0 YES OK (3) mips32r6_malta 4.8.1 2.6.0 YES OK (3) mips64el_malta 4.8.1 2.5.0 YES OK mips64_malta 4.8.1 2.5.0 YES OK mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4) mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4) ppc_g3beige 4.8.1 2.5.0 YES OK ppc_mpc8544ds 4.8.1 2.5.0 YES OK ppc_virtex_ml507 4.8.1 2.5.0 NO OK ppc64_pseries 4.8.1 2.5.0 YES OK sh4 4.8.1 2.5.0 YES OK sh4eb 4.8.1 2.5.0 NO (1) OK sparc_ss10 4.8.1 2.5.0 YES OK sparc64_sun4u 4.8.1 2.5.0 YES OK sparc_sun4u 4.8.1 2.5.0 YES OK x86 4.8.1 2.5.0 YES OK x86_64 4.8.1 2.5.0 YES OK xtensa_lx60 4.8.1 2.6.0 YES OK xtensa_lx60_nommu 4.8.1 2.6.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Known to fail with qemu versions lower than 2.6.0 (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0 Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-13 15:02:48 +02:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
# Firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
# Packages
#
# Use connman so that networking setup is simpler, via connmanctl tool
# acpid is for seamless power button support
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_CONNMAN=y
BR2_PACKAGE_CONNMAN_CLIENT=y
BR2_PACKAGE_CONNMAN_WIFI=y
Reference in New Issue Copy Permalink