NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3880a6ab3c
kumquat-buildroot/configs/pandaboard_defconfig

42 lines
1.0 KiB
Plaintext
Raw Normal View History

configs: add support for PandaBoard and PandaBoard ES This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-18 23:04:52 +01:00
# Architecture
BR2_arm=y
BR2_cortex_a9=y
# system
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyO2"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
# filesystem
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
pandaboard: fix defconf build with recent kernels The patch "pandaboard: Fix defconfig build" locked the default pandaboard kernel to 3.8.11. This is inconvenient, since the boot process has changed since kernel > 3.8. Update the default kernel to 3.12.2 and fix the boot image configuration, but remain compatible with legacy U-Boot versions by using appended flattened device tree uImage. This change *should* keep future kernels compatible with a fixed U-Boot version. Note the default device tree is now for the pandaboard-ES, so users of other board revisions will need to set the correct DTS_NAME. [Peter: use custom kernel headers version (3.12.2)] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-06 21:46:46 +01:00
# Lock to 3.12 headers to avoid breaking with newer kernels
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="3.12.2"
pandaboard: Fix defconfig build Commit 75b7dc68 ("linux: default to 3.9, remove 3.8") made 3.9 the default kernel version. The omap kernel switched to multiplatform kernel during the 3.9 kernel development cycle. Obviously, the uImage generation doesn't work anymore with multiplatform kernels, since you have to provide the kernel load address, resulting in a build error. Lock down the kernel version to 3.8 to keep the old behaviour until someone submits a patch to switch to multiplatform kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-06 02:14:56 +02:00
configs: add support for PandaBoard and PandaBoard ES This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-18 23:04:52 +01:00
# Kernel
BR2_LINUX_KERNEL=y
pandaboard: Fix defconfig build Commit 75b7dc68 ("linux: default to 3.9, remove 3.8") made 3.9 the default kernel version. The omap kernel switched to multiplatform kernel during the 3.9 kernel development cycle. Obviously, the uImage generation doesn't work anymore with multiplatform kernels, since you have to provide the kernel load address, resulting in a build error. Lock down the kernel version to 3.8 to keep the old behaviour until someone submits a patch to switch to multiplatform kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-06 02:14:56 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
pandaboard: fix defconf build with recent kernels The patch "pandaboard: Fix defconfig build" locked the default pandaboard kernel to 3.8.11. This is inconvenient, since the boot process has changed since kernel > 3.8. Update the default kernel to 3.12.2 and fix the boot image configuration, but remain compatible with legacy U-Boot versions by using appended flattened device tree uImage. This change *should* keep future kernels compatible with a fixed U-Boot version. Note the default device tree is now for the pandaboard-ES, so users of other board revisions will need to set the correct DTS_NAME. [Peter: use custom kernel headers version (3.12.2)] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-06 21:46:46 +01:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.2"
configs: add support for PandaBoard and PandaBoard ES This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-18 23:04:52 +01:00
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
pandaboard: fix defconf build with recent kernels The patch "pandaboard: Fix defconfig build" locked the default pandaboard kernel to 3.8.11. This is inconvenient, since the boot process has changed since kernel > 3.8. Update the default kernel to 3.12.2 and fix the boot image configuration, but remain compatible with legacy U-Boot versions by using appended flattened device tree uImage. This change *should* keep future kernels compatible with a fixed U-Boot version. Note the default device tree is now for the pandaboard-ES, so users of other board revisions will need to set the correct DTS_NAME. [Peter: use custom kernel headers version (3.12.2)] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-06 21:46:46 +01:00
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
BR2_LINUX_KERNEL_APPENDED_DTB=y
BR2_LINUX_KERNEL_USE_INTREE_DTS=y
# might need omap4-panda or omap4-panda-a4 instead
BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap4-panda-es"
configs: add support for PandaBoard and PandaBoard ES This is a default configuration for Panda and PandaES, tested on both platforms. DEVTMPFS is enabled, to use static dev configuration one would need to update the generic dev table for ttyO driver. Panda is well supported in mainline kernel with omap2plus_defconfig, so this should be safe. U-boot SPL support is enabled by default as x-loader is now deprecated. With OMAP platforms u-boot,img format is prefered now, so it's enabled by default as well. Also, on PandaBoard, the name of SPL target file is MLO. Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com> Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-18 23:04:52 +01:00
# GCC
BR2_GCC_VERSION_4_6_X=y
# Bootloaders
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_BOARDNAME="omap4_panda"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
pandaboard: fix defconf build with recent kernels The patch "pandaboard: Fix defconfig build" locked the default pandaboard kernel to 3.8.11. This is inconvenient, since the boot process has changed since kernel > 3.8. Update the default kernel to 3.12.2 and fix the boot image configuration, but remain compatible with legacy U-Boot versions by using appended flattened device tree uImage. This change *should* keep future kernels compatible with a fixed U-Boot version. Note the default device tree is now for the pandaboard-ES, so users of other board revisions will need to set the correct DTS_NAME. [Peter: use custom kernel headers version (3.12.2)] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-06 21:46:46 +01:00
BR2_TARGET_UBOOT_LATEST_VERSION=n
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2012.07"
Reference in New Issue Copy Permalink