NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2c21a4615b
kumquat-buildroot/configs/olimex_a20_olinuxino_lime_mali_defconfig

56 lines
1.7 KiB
Plaintext
Raw Normal View History

configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
# Architecture
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_EABIHF=y
defconfigs: all use the headers from the kernel For most defconfigs, it was trivial to deduce the kernel version, by just reading the version string, which could be: - a standard upstream version string vX.Y.Z - a non-standard version string, but still containg the standard X.Y.Z Those for which it was not so trivial were those hosted on git tree. Since most were already using a custom linux-headers version, it could be easily deduced from that. It was confirmed by browsing said git trees and check the version there. There are a few cases were there was a mismatch: - microzed: uses a 3.18 kernel, but 3.8 headers; fixed. - xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed. - zedboard: uses a 3.18 kernel, but 3.8 headers; fixed. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-06 00:06:18 +01:00
# Linux headers same as kernel, a 3.4 series
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y
# System configuration
BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!"
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
olimex_a20_olinuxino_lime: rename board dir to remove _lime suffix The files in board/olimex/a20_olinuxino_lime/ work with minimal or no modifications for the Olimex A20-OLinuXino-Micro board, whose support is going to be added in a later commit. Rename the directory to clarify it's not restricted to the Lime anymore. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-30 00:05:22 +02:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh"
olimex_a20: refactor with genimage.sh Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-01 21:37:04 +02:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
# Kernel
BR2_LINUX_KERNEL=y
configs/olimex_a20_olinuxino_lime_mali: bump kernel version This commit changes the kernel version used by the olimex_a20_olinuxino_lime_mali in order to use a version that builds fine with gcc 5.x. This kernel repository is listed in https://linux-sunxi.org/Linux#External_links as a possible replacement for the aging 3.4 sunxi kernel. Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-07 00:14:08 +01:00
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/dan-and/linux-sunxi.git"
# based on Linux version 3.4.113
configs/olimex_a20_olinuxino_lime_mali: bump kernel version Bump the kernel to the next commit which fix the build with gcc6. Signed-off-by: Romain Naour <romain.naour@gmail.com> Cc: Francois Perrad <francois.perrad@gadz.org> Cc: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-12-04 17:30:25 +01:00
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fc385cc6dfa350382ecc94a520a716b57e654410"
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
# sunxi packages
BR2_PACKAGE_SUNXI_TOOLS=y
BR2_PACKAGE_SUNXI_BOARDS=y
BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/a20-olinuxino_lime.fex"
BR2_PACKAGE_SUNXI_MALI=y
BR2_PACKAGE_SUNXI_MALI_DBG=y
# Filesystem
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
# Bootloaders
BR2_TARGET_UBOOT=y
olimex_a20_olinuxino_lime_mali: bump u-boot to 2016.09.01 U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT in order to properly start the kernel (Error: unrecognized/unsupported machine ID) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-06 15:38:51 +01:00
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
olimex_a20_olinuxino_lime: bump versions Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-09-12 05:41:41 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
olimex_a20_olinuxino_lime_mali: bump u-boot to 2016.09.01 U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT in order to properly start the kernel (Error: unrecognized/unsupported machine ID) Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-06 15:38:51 +01:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
BR2_TARGET_UBOOT_NEEDS_DTC=y
olimex_a20_olinuxino_lime: bump linux and U-Boot versions This fixes build errors with GCC 6. Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-08-04 06:27:27 +02:00
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
BR2_TARGET_UBOOT_FORMAT_BIN=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
olimex_a20: refactor with U-Boot boot script Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-01 21:37:03 +02:00
BR2_TARGET_UBOOT_BOOT_SCRIPT=y
BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a20_olinuxino/boot-mali.cmd"
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board This commit adds a new defconfig for the Olimex A20 OLinuxino Lime board, based on the 3.4.x vendor specific kernel, which allows to use the Mali 3D acceleration for OpenGL support. Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-06-26 12:06:57 +02:00
# Additional tools
olimex_a20_olinuxino_lime: update to use genimage Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Francois Perrad <fperrad@gmail.com> Tested-by: Francois Perrad <fperrad@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-23 01:24:31 +01:00
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink