NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2a2a1c3831
kumquat-buildroot/configs/stm32mp157c_dk2_defconfig

54 lines
1.9 KiB
Plaintext
Raw Normal View History

configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Architecture
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_arm=y
BR2_cortex_a7=y
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Linux headers same as kernel, a 5.13 series
configs/stm32mp157c_dk2: bump Linux and U-Boot versions Needed to keep both stm32mp157c_dk1 and stm32mp157c_dk2 aligned. Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-07-15 22:47:46 +02:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_13=y
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# System configuration
configs/stm32mp157_dk: rename to the sm32mp157c_dk2 That is useful and needed for upcoming introducing stm32mp157a-dk1 board. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-27 13:53:39 +01:00
BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157c-dk2/overlay/"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 16:49:43 +02:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp157/post-image.sh"
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Kernel
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_LINUX_KERNEL=y
configs/stm32mp157_dk_defconfig: switch to mainline 5.3.7 linux version Switch to the official Linux repository since the board has been officially supported. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-10-24 19:29:42 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/stm32mp157c_dk2: bump Linux and U-Boot versions Needed to keep both stm32mp157c_dk1 and stm32mp157c_dk2 aligned. Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-07-15 22:47:46 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.13"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
configs/stm32mp157_dk: rename to the sm32mp157c_dk2 That is useful and needed for upcoming introducing stm32mp157a-dk1 board. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-27 13:53:39 +01:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157c-dk2/linux.config"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32mp157c-dk2"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Filesystem
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Bootloaders
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 16:49:43 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
configs/stm32mp157c_dk2_defconfig: update arm-trusted-firmware to lts-v2.8.13 The assumption is that updates to the stable branch should not break anything, so we use the latest LTS rather than a specific version. Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:07 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION=y
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 16:49:43 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-nodtb.bin"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-dk2.dtb E=0 BL33_CFG=$(BINARIES_DIR)/u-boot.dtb"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 16:49:43 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
configs/stm32mp157_dk_defconfig: switch to mainline 2019.07 U-Boot version Switch to the official U-Boot repository since the board has been officially supported. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-10-24 19:29:43 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/stm32mp157*_dk*: bump U-Boot version to 2023.04 The u-boot.stm32 image is now created by binman tool, so the BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be disabled, but pylibfdt is now needed. Tested on stm32mp157f_dk2. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-07-03 18:01:49 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 16:49:43 +02:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
configs/stm32mp157*_dk*: bump U-Boot version to 2023.04 The u-boot.stm32 image is now created by binman tool, so the BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be disabled, but pylibfdt is now needed. Tested on stm32mp157f_dk2. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-07-03 18:01:49 +02:00
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
configs/stm32mp157*: uboot needs openssl Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850755 https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850753 https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850754 Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-11-06 11:02:44 +01:00
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
BR2_TARGET_UBOOT_FORMAT_DTB=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2"
configs/stm32mp157*_dk*: use recommended layout Signed-off-by: Francois Perrad <francois.perrad@gadz.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-10-23 09:11:58 +02:00
# Additional tools
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 16:24:56 +02:00
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink