NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
24bb610712
kumquat-buildroot/board/qemu/aarch64-virt/linux.config

76 lines
1.5 KiB
Plaintext
Raw Normal View History

qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
support/testing/tests/fs: test OCI format This patch adds runtime testing of the OCI archive created by the sloci scripting. It launches a containerd instance, imports, and runs the OCI container. The existing QEMU AARCH64 kernel config was extended to enable common options used by a container runtime (cgroup and overlayfs). Signed-off-by: Matthew Weber <matthew.weber@collins.com> [Arnout: adapt file name which is arm64 now; add to DEVELOPERS] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-08-27 22:54:30 +02:00
CONFIG_MEMCG=y
CONFIG_BLK_CGROUP=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_SCHED_AUTOGROUP=y
CONFIG_PROFILING=y
board/qemu/aarch64-virt/linux.config: regenerate after kernel version bump Regenerate the with savedefconfig. Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:44 +02:00
CONFIG_ARCH_VEXPRESS=y
CONFIG_COMPAT=y
board/qemu/aarch64-virt/linux.config: enable QEMU firmware configuration (fw_cfg) >From [1]: This kernel option allow exporting of the QEMU firmware configuration (fw_cfg) file entries via sysfs. Entries are found under /sys/firmware/fw_cfg when this option is enabled and loaded. Enable the suboption to allow the qemu_fw_cfg device to be initialized via the kernel command line or using a module parameter. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/firmware/Kconfig?h=v5.4.42#n187 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:48 +02:00
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BINFMT_MISC=y
board/qemu/aarch64-virt/linux.config: regenerate after kernel version bump Regenerate the with savedefconfig. Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:44 +02:00
CONFIG_TRANSPARENT_HUGEPAGE=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
qemu/aarch64-virt: update to the latest versions Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-10-07 14:29:36 +02:00
CONFIG_BRIDGE=m
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_NET_SCHED=y
CONFIG_VSOCKETS=y
board/qemu/aarch64-virt/linux.config: enable PCIe and PCI host generic driver Add the CONFIG_PCI symbol due a change in kernel 5.0 [1]. The option was previously enabled by default (default y). "PCI: consolidate PCI config entry in drivers/pci There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci." Qemu aarch64 provide a PCIe Host bridge but it require CONFIG_PCI_HOST_GENERIC enabled in the kernel. With CONFIG_PCI_HOST_GENERIC enabled PCIe host bridge is detected: $ dmesg pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: pci-host-generic 4010000000.pcie: IO 0x3eff0000..0x3effffff -> 0x00000000 pci-host-generic 4010000000.pcie: MEM 0x10000000..0x3efeffff -> 0x10000000 pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 $ lspci 00:00.0 Host bridge: Red Hat, Inc. QEMU PCIe Host bridge [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb01d42a77785ff96b6e66a2a2e7027fc6d78e4a Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:46 +02:00
CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_MACVLAN=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
configs/qemu_aarch64_virt_defconfig: linux.config: enable fb/input support The Linux config already enabled drm-virtio for graphics output, but not the corresponding virtio-input / evdev drivers for input or the compatibility fb option. Enable them so keyboard/mouse input works and /dev/fb0 is provided. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-22 16:37:12 +01:00
CONFIG_INPUT_EVDEV=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
board/qemu/aarch64-virt/linux.config: enable TPM tis support Qemu aarch64 virt machine support TPM using a swtmp [1] TPM emulator provided on the qemu command line [2]. [1] https://github.com/stefanberger/swtpm/wiki [2] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=c294ac327ca99342b90bd3a83d2cef9b447afaa7 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:50 +02:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
board/qemu/aarch64-virt/linux.config: enable VIRTIO_GPU driver This driver is intended to be used by mesa virgl Gallium on the guest. virtio-gpu is enabled by adding "-device virtio-gpu-pci" on the qemu command line. It's detected by lspci and dmesg log: $ lspci 00:01.0 Display controller: Red Hat, Inc. Virtio GPU (rev 01) $ dmesg virtio-pci 0000:00:01.0: enabling device (0000 -> 0002) [drm] pci: virtio-gpu-pci detected at 0000:00:01.0 [drm] virgl 3d acceleration not supported by host [drm] EDID support available. [TTM] Zone kernel: Available graphics memory: 51876 KiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] number of scanouts: 1 [drm] number of cap sets: 0 [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 The framebuffer interface fb0 is now present in /dev $ ls /dev/fb* /dev/fb0 See: https://www.kraxel.org/blog/2019/09/display-devices-in-qemu/ https://at.projects.genivi.org/wiki/display/WIK4/GENIVI+Technical+Summit+Session+Content+2018?preview=%2F28412356%2F28412481%2F2018-10-11_GeniviBangalorTechSummit_Virtio_GPU.pdf Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:47 +02:00
CONFIG_DRM=y
CONFIG_DRM_VIRTIO_GPU=y
configs/qemu_aarch64_virt_defconfig: linux.config: enable fb/input support The Linux config already enabled drm-virtio for graphics output, but not the corresponding virtio-input / evdev drivers for input or the compatibility fb option. Enable them so keyboard/mouse input works and /dev/fb0 is provided. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-22 16:37:12 +01:00
CONFIG_FB=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_RTC_CLASS=y
board/qemu/aarch64-virt/linux.config: add RTC PL031 driver Qemu for the aarch64 virt emulate an RTC PL031 device. Enable the kernel support to allow setting the system time. "date" now return the current time: Sun Jul 5 20:38:50 UTC 2020 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:45 +02:00
CONFIG_RTC_DRV_PL031=y
board/qemu/aarch64-virt/linux.config: enable VIRTIO_GPU driver This driver is intended to be used by mesa virgl Gallium on the guest. virtio-gpu is enabled by adding "-device virtio-gpu-pci" on the qemu command line. It's detected by lspci and dmesg log: $ lspci 00:01.0 Display controller: Red Hat, Inc. Virtio GPU (rev 01) $ dmesg virtio-pci 0000:00:01.0: enabling device (0000 -> 0002) [drm] pci: virtio-gpu-pci detected at 0000:00:01.0 [drm] virgl 3d acceleration not supported by host [drm] EDID support available. [TTM] Zone kernel: Available graphics memory: 51876 KiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] number of scanouts: 1 [drm] number of cap sets: 0 [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 The framebuffer interface fb0 is now present in /dev $ ls /dev/fb* /dev/fb0 See: https://www.kraxel.org/blog/2019/09/display-devices-in-qemu/ https://at.projects.genivi.org/wiki/display/WIK4/GENIVI+Technical+Summit+Session+Content+2018?preview=%2F28412356%2F28412481%2F2018-10-11_GeniviBangalorTechSummit_Virtio_GPU.pdf Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:47 +02:00
CONFIG_VIRTIO_PCI=y
configs/qemu_aarch64_virt_defconfig: linux.config: enable fb/input support The Linux config already enabled drm-virtio for graphics output, but not the corresponding virtio-input / evdev drivers for input or the compatibility fb option. Enable them so keyboard/mouse input works and /dev/fb0 is provided. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-01-22 16:37:12 +01:00
CONFIG_VIRTIO_INPUT=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_MAILBOX=y
CONFIG_PL320_MBOX=y
board/qemu/aarch64-virt/linux.config: enable ARM_SMMU_V3 >From [1]: Support for implementations of the ARM System MMU architecture version 3 providing translation support to a PCIe root complex. ARM SMMU is supported since Qemu v3.0.0 [2]. ARM_SMMU_V3 can be enabled with: -M virt,iommu=smmuv3 dmesg: arm-smmu-v3 9050000.smmuv3: ias 44-bit, oas 44-bit (features 0x00000305) arm-smmu-v3 9050000.smmuv3: allocated 262144 entries for cmdq arm-smmu-v3 9050000.smmuv3: allocated 131072 entries for evtq [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/iommu/Kconfig?h=v5.4.42#n390 [2] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=527773eeef9f2225370f9c17c35074b2ed0ced92 Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:49 +02:00
CONFIG_ARM_SMMU_V3=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_EXT4_FS=y
board/qemu/aarch64-virt/linux.config: enable VIRTIO_FS driver virtio-fs allow sharing a directory between the host and the guest. It require virtiofsd daemon running before starting Qemu. The wiki [1] recommand to enable the following kernel options: CONFIG_VIRTIO CONFIG_VIRTIO_FS CONFIG_DAX CONFIG_FS_DAX CONFIG_DAX_DRIVER CONFIG_ZONE_DEVICE But virtio-fs works fine with only VIRTIO_FS. Note: ZONE_DEVICE can only be enabled on aarch64 since kernel >= 5.7. ARCH_ENABLE_MEMORY_HOTREMOVE support is missing for previous kernel [2]. [1] https://virtio-fs.gitlab.io/howto-qemu.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bbd6ec605c0fc286c3f8ce60b4ed44635361d58b Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-07-07 01:41:51 +02:00
CONFIG_FUSE_FS=y
CONFIG_VIRTIO_FS=y
support/testing/tests/fs: test OCI format This patch adds runtime testing of the OCI archive created by the sloci scripting. It launches a containerd instance, imports, and runs the OCI container. The existing QEMU AARCH64 kernel config was extended to enable common options used by a container runtime (cgroup and overlayfs). Signed-off-by: Matthew Weber <matthew.weber@collins.com> [Arnout: adapt file name which is arm64 now; add to DEVELOPERS] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-08-27 22:54:30 +02:00
CONFIG_OVERLAY_FS=y
qemu/aarch64-virt: add new sample config Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-07 03:55:03 +02:00
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
Reference in New Issue Copy Permalink