NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
24b74c3bbd
kumquat-buildroot/configs/beaglebone_defconfig

53 lines
1.5 KiB
Plaintext
Raw Normal View History

configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Architecture
BeagleBone: new board This configuration provides a basic setup for using Buildroot to create all of the images needed for a BeagleBone. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-05-07 07:00:01 +02:00
BR2_arm=y
BR2_cortex_a8=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
BR2_ARM_FPU_VFPV3=y
# Patches
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
BR2_GLOBAL_PATCH_DIR="board/beaglebone/patches"
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Linux headers same as kernel, a 5.10 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
# System
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
# Image
configs/beaglebone: don't use custom post-image script Use support/scripts/genimage.sh, instead, which prevents duplicating TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root. Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for beagleboneai. Keep the post-image script because it is still used by beaglebone_qt5. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-13 02:22:26 +02:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/beaglebone/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglebone/genimage.cfg"
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Kernel
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
BR2_LINUX_KERNEL=y
configs/beaglebone: bump kernel version to 4.19.79-ti-r30 Use the github macro instead of git, to save download time. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-11-13 13:21:58 +01:00
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.30-ti-r3)/linux-5.10.30-ti-r3.tar.gz"
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs: beaglebone: bump kernel and uboot version Switch to Linux kernel version 4.19.38 from the TI SDK 06.00.00.07 (TI SDK release date: 7.8.2019) Added beaglebone blue Updated uboot to version 2019.07 Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-10-11 21:06:10 +02:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue"
configs/beaglebone: kernel builds needs host-openssl Fixes: 514 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory 515 #include <openssl/bio.h> Seen at: https://gitlab.com/buildroot.org/buildroot/-/jobs/378314247 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-12-16 11:05:48 +01:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Filesystem
BeagleBone: new board This configuration provides a basic setup for using Buildroot to create all of the images needed for a BeagleBone. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-05-07 07:00:01 +02:00
BR2_TARGET_ROOTFS_EXT2=y
beaglebone: defconfigs: select ext4 as rootfs Select ext4 as root file system as the genimage config expects ext4 not ext2. Tested on beaglebone, beagleboneblack and AM335x EVM [Peter: reworded slightly] Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-18 21:51:53 +02:00
BR2_TARGET_ROOTFS_EXT2_4=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Bootloader
BeagleBone: new board This configuration provides a basic setup for using Buildroot to create all of the images needed for a BeagleBone. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-05-07 07:00:01 +02:00
BR2_TARGET_UBOOT=y
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
configs: use new u-boot custom version option Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-06 23:07:47 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04"
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am335x_evm"
beaglebone: defconfigs: u-boot needs dtc Fixes: https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/168763221 Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-19 17:52:57 +02:00
BR2_TARGET_UBOOT_NEEDS_DTC=y
configs/beaglebone: update kernel/uboot, add AM335x EVM support This patch updates the target config for the beaglebone based on the AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk. Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone, am335x-boneblack will be built and a sd card image is created with a post-image script. The kernel and driver versions match the ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm revisions (1 bit sd card) and JTAG debugging. Kernel JTAG patch: By default the kernel will disable the JTAG clock, access via the JTAG port will not work after the kernel booted. The AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock alive. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [Thomas: remove 1-bit MMC patch, it's causing a significant performance regression for users of BeagleBone, which are 99.99% of the users of this defconfig.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 00:20:48 +02:00
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
BeagleBone: new board This configuration provides a basic setup for using Buildroot to create all of the images needed for a BeagleBone. Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-05-07 07:00:01 +02:00
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Required tools to create the SD image
configs/beaglebone: Use genimage to produce the SD card image Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> [Thomas: added host dosfstools to the defconfig, needed to build a SD card image with genimage when a FAT partition is listed in the genimage configuration.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-04 23:29:09 +02:00
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
configs/beaglebone: bump kernel and U-Boot versions - Bump kernel to version 5.10.30-ti-r3. - Bump U-Boot to version 2021.04. Add mdev to the beaglebone_defconfig. This gives us automatic USB support, as the omap2plus kernel has most drivers as modules. While at it, enable VFPv3 with 32 registers (instead of 16) and add a few comments to the defconfig. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-05-16 20:09:52 +02:00
# Supporting host tools to build FIT image
configs/beaglebone: kernel build needs mkimage Following ffbe46a5295ce4e0442728f2ad3e19afa7eaa8ed ("linux: simplify LINUX_BUILD_CMDS"), the Linux kernel build for beaglebone_defconfig builds more things, including some .itb files, which require mkimage with FIT support. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/199339433 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-22 22:08:26 +02:00
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
Reference in New Issue Copy Permalink