72 lines
1.7 KiB
Plaintext
72 lines
1.7 KiB
Plaintext
|
*********************
|
||
|
|
NXP i.MX8MP EVK board
|
||
|
|
*********************
|
||
|
|
|
||
|
|
This file documents the Buildroot support for the i.MX 8M Plus EVK board.
|
||
|
|
|
||
|
|
Build
|
||
|
|
=====
|
||
|
|
|
||
|
|
First, configure Buildroot for the i.MX 8M Plus EVK board:
|
||
|
|
|
||
|
|
make freescale_imx8mpevk_defconfig
|
||
|
|
|
||
|
|
Build all components:
|
||
|
|
|
||
|
|
make
|
||
|
|
|
||
|
|
You will find in output/images/ the following files:
|
||
|
|
- bl31.bin
|
||
|
|
- boot.vfat
|
||
|
|
- ddr_fw.bin
|
||
|
|
- Image
|
||
|
|
- imx8-boot-sd.bin
|
||
|
|
- imx8mp-evk.dtb
|
||
|
|
- lpddr4_pmu_train_fw.bin
|
||
|
|
- rootfs.ext2
|
||
|
|
- rootfs.ext4
|
||
|
|
- rootfs.tar
|
||
|
|
- sdcard.img
|
||
|
|
- u-boot.bin
|
||
|
|
- u-boot.itb
|
||
|
|
- u-boot-nodtb.bin
|
||
|
|
- u-boot-spl.bin
|
||
|
|
- u-boot-spl-ddr.bin
|
||
|
|
|
||
|
|
Create a bootable SD card
|
||
|
|
=========================
|
||
|
|
|
||
|
|
To determine the device associated to the SD card have a look in the
|
||
|
|
/proc/partitions file:
|
||
|
|
|
||
|
|
cat /proc/partitions
|
||
|
|
|
||
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
||
|
|
directory, ready to be dumped on a SD card. Launch the following
|
||
|
|
command as root:
|
||
|
|
|
||
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
||
|
|
|
||
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
||
|
|
|
||
|
|
For details about the medium image layout, see the definition in
|
||
|
|
board/freescale/common/imx/genimage.cfg.template_imx8.
|
||
|
|
|
||
|
|
Boot the i.MX 8M Plus EVK board
|
||
|
|
===============================
|
||
|
|
|
||
|
|
To boot your newly created system (refer to the i.MX 8M Plus EVK Documentation
|
||
|
|
[1] for guidance):
|
||
|
|
- insert the SD card in the SD slot of the board;
|
||
|
|
- Configure the switches as follows (X = "don't care"):
|
||
|
|
SW4: 0011 SW4[1-4]
|
||
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
||
|
|
emulator at 115200 bps, 8n1;
|
||
|
|
- power on the board.
|
||
|
|
|
||
|
|
Enjoy!
|
||
|
|
|
||
|
|
References
|
||
|
|
==========
|
||
|
|
[1] https://www.nxp.com/document/guide/get-started-with-the-i-mx-8m-plus-evk:GS-iMX-8M-Plus-EVK
|