NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1ffe9e7812
kumquat-buildroot/configs/orangepi_lite2_defconfig

61 lines
2.1 KiB
Plaintext
Raw Normal View History

configs/orangepi_lite2: new defconfig Add initial support for Orangepi Lite2 board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-03 13:56:07 +01:00
BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV4=y
# Linux headers same as kernel, a 4.18 series
configs/orangepi_lite2: fix kernel headers option Contrary to what the comment in the defconfig says, the orangepi_lite2_defconfig was not using the "same as kernel" option for kernel headers, but really selecting explicitly Linux 4.18 headers, independently from the kernel version. Except that in the mean time, BR2_KERNEL_HEADERS_4_18 has been removed, causing a build failure due to the legacy checking: Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop. This commit fixes that by using the proper BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18 option. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/158295163 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-02-08 13:08:31 +01:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
configs/orangepi_lite2: new defconfig Add initial support for Orangepi Lite2 board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-03 13:56:07 +01:00
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="h6-v1.0a"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_lite2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-lite2"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
# Filesystem
BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Lite2"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
configs/orangepi_lite2: add WiFi support Orangepi lite2 board has AP6356S WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add broadcom wireless firmware package to image - add basic wireless tools to image - add rootfs overlay with proper NVRAM file for on-board AP6356S chip - add mdev to image to enable module autoloading - update readme.txt to test wifi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-03 13:56:08 +01:00
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
configs/orangepi_lite2: new defconfig Add initial support for Orangepi Lite2 board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-03 13:56:07 +01:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
configs/orangepi_lite2: add WiFi support Orangepi lite2 board has AP6356S WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add broadcom wireless firmware package to image - add basic wireless tools to image - add rootfs overlay with proper NVRAM file for on-board AP6356S chip - add mdev to image to enable module autoloading - update readme.txt to test wifi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-03 13:56:08 +01:00
BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-lite2/rootfs_overlay"
# wireless firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
# wireless tools
BR2_PACKAGE_IW=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
Reference in New Issue Copy Permalink