2017-06-03 14:07:45 +02:00
|
|
|
config BR2_PACKAGE_GDB_ARCH_SUPPORTS
|
|
|
|
|
bool
|
|
|
|
|
default y
|
2017-06-03 15:39:38 +02:00
|
|
|
depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT)
|
gdb: drop support for Microblaze
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-08-03 23:58:12 +02:00
|
|
|
depends on !BR2_microblaze
|
2017-06-03 14:07:45 +02:00
|
|
|
depends on !BR2_nios2
|
2017-06-03 15:39:38 +02:00
|
|
|
depends on !BR2_or1k
|
2019-06-17 04:44:45 +02:00
|
|
|
depends on !BR2_nds32
|
2017-06-03 14:07:45 +02:00
|
|
|
|
2013-10-13 16:55:32 +02:00
|
|
|
comment "gdb/gdbserver needs a toolchain w/ threads, threads debug"
|
2017-06-03 14:07:45 +02:00
|
|
|
depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_THREADS_DEBUG
|
|
|
|
|
|
package/gdb: rework dependency for C++11
As we are about to switch to 8.0 as the default gdb version, we
need to adjust how the gdb dependencies are handled. Indeed, from 8.0
onwards, gdb needs a C++11 capable compiler, i.e at least gcc 4.8.
Until now, Config.in.host was making sure that gdb 8.0 was not
selectable if the cross-compilation toolchain did not have C++ support
with gcc >= 4.8. This worked fine because the default version of gdb,
used as the target gdb version when no host gdb is built, was 7.11,
and did not require C++11.
With the switch to 8.0 as the default version, when target gdb is
enabled but not host gdb, 8.0 is used, which means we need a C++11
capable compiler. The dependencies in Config.in.host are no longer
sufficient.
So instead, we remove the target-related dependencies from
Config.in.host and move them properly to Config.in. The overall logic
is the following:
- In Config.in.host, BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS ensures that
we have at least host gcc 4.8 if we're on ARC, because the ARC gdb
needs C++11. We remove the target toolchain related dependencies
from here.
- In Config.in.host, the version selection ensures that 8.0 cannot be
selected if the host toolchain does not have at least gcc 4.8. We
remove the target toolchain related dependencies from here.
- In Config.in.host, we introduce a BR2_PACKAGE_GDB_NEEDS_CXX11
option, that indicates whether the currently selected version of
gdb requires C++11 support in the toolchain to build the target
variant. Even though this option is more related to the target
variant of gdb, we keep it in Config.in.host so that it appears
next to the definition of BR2_GDB_VERSION, to make sure they are
kept in sync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-06-24 15:53:06 +02:00
|
|
|
comment "gdb/gdbserver >= 8.x needs a toolchain w/ C++, gcc >= 4.8"
|
|
|
|
|
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
|
|
|
|
|
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
config BR2_PACKAGE_GDB
|
|
|
|
|
bool "gdb"
|
2017-04-22 19:17:54 +02:00
|
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS && BR2_TOOLCHAIN_HAS_THREADS_DEBUG
|
2017-06-03 14:07:45 +02:00
|
|
|
depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS
|
2019-08-02 15:09:31 +02:00
|
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
|
|
|
|
|
depends on BR2_INSTALL_LIBSTDCPP
|
2018-11-26 15:24:38 +01:00
|
|
|
# no gdbserver on riscv
|
|
|
|
|
select BR2_PACKAGE_GDB_DEBUGGER if BR2_riscv
|
2013-04-07 02:04:34 +02:00
|
|
|
# When the external toolchain gdbserver is copied to the
|
|
|
|
|
# target, we don't allow building a separate gdbserver. The
|
|
|
|
|
# one from the external toolchain should be used.
|
|
|
|
|
select BR2_PACKAGE_GDB_SERVER if \
|
2014-10-27 09:25:28 +01:00
|
|
|
(!BR2_PACKAGE_GDB_DEBUGGER && !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
help
|
|
|
|
|
GDB, the GNU Project debugger, allows you to see what is
|
|
|
|
|
going on `inside' another program while it executes -- or
|
|
|
|
|
what another program was doing at the moment it crashed.
|
|
|
|
|
|
|
|
|
|
This option allows to build gdbserver and/or the gdb
|
|
|
|
|
debugger for the target.
|
|
|
|
|
|
|
|
|
|
For embedded development, the most common solution is to
|
|
|
|
|
build only 'gdbserver' for the target, and use a cross-gdb
|
|
|
|
|
on the host. See BR2_PACKAGE_HOST_GDB in the Toolchain menu
|
|
|
|
|
to enable one. Notice that external toolchains often provide
|
|
|
|
|
their own pre-built cross-gdb and gdbserver binaries.
|
|
|
|
|
|
|
|
|
|
http://www.gnu.org/software/gdb/
|
|
|
|
|
|
|
|
|
|
if BR2_PACKAGE_GDB
|
|
|
|
|
|
|
|
|
|
config BR2_PACKAGE_GDB_SERVER
|
|
|
|
|
bool "gdbserver"
|
2013-04-07 02:04:34 +02:00
|
|
|
depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
|
2018-11-26 15:24:38 +01:00
|
|
|
depends on !BR2_riscv
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
help
|
|
|
|
|
Build the gdbserver stub to run on the target.
|
|
|
|
|
A full gdb is needed to debug the progam.
|
|
|
|
|
|
|
|
|
|
config BR2_PACKAGE_GDB_DEBUGGER
|
|
|
|
|
bool "full debugger"
|
|
|
|
|
depends on BR2_USE_WCHAR
|
gdb: drop support for Microblaze
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-08-03 23:58:12 +02:00
|
|
|
depends on !BR2_sh
|
2019-05-31 08:39:05 +02:00
|
|
|
depends on !BR2_csky
|
2017-04-22 19:17:54 +02:00
|
|
|
select BR2_PACKAGE_NCURSES
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
|
2013-10-13 16:55:32 +02:00
|
|
|
comment "full gdb on target needs a toolchain w/ wchar"
|
gdb: drop support for Microblaze
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2017-08-03 23:58:12 +02:00
|
|
|
depends on !BR2_sh
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
depends on !BR2_USE_WCHAR
|
|
|
|
|
|
2014-09-15 22:50:07 +02:00
|
|
|
if BR2_PACKAGE_GDB_DEBUGGER
|
|
|
|
|
|
|
|
|
|
config BR2_PACKAGE_GDB_TUI
|
|
|
|
|
bool "TUI support"
|
|
|
|
|
help
|
|
|
|
|
This option enables terminal user interface (TUI) for gdb
|
|
|
|
|
|
|
|
|
|
"The GDB Text User Interface (TUI) is a terminal interface
|
|
|
|
|
which uses the curses library to show the source file, the
|
|
|
|
|
assembly output, the program registers and GDB commands in
|
|
|
|
|
separate text windows."
|
|
|
|
|
|
|
|
|
|
https://sourceware.org/gdb/current/onlinedocs/gdb/TUI.html
|
|
|
|
|
|
2014-09-15 22:50:10 +02:00
|
|
|
config BR2_PACKAGE_GDB_PYTHON
|
|
|
|
|
bool "Python support"
|
|
|
|
|
# Only Python 2.x is supported by gdb for now
|
|
|
|
|
depends on BR2_PACKAGE_PYTHON
|
|
|
|
|
help
|
|
|
|
|
This option enables Python support in the target gdb.
|
|
|
|
|
|
2014-09-15 22:50:07 +02:00
|
|
|
endif
|
|
|
|
|
|
gdb: convert to the package infrastructure
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-07 02:04:33 +02:00
|
|
|
endif
|
