NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1d11d6314c
kumquat-buildroot/configs/pc_x86_64_bios_defconfig

63 lines
1.8 KiB
Plaintext
Raw Normal View History

configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Architecture
BR2_x86_64=y
# Toolchain, required for eudev (to autoload drivers)
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# System
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Required tools to create bootable media
BR2_PACKAGE_HOST_GENIMAGE=y
# Bootloader
BR2_TARGET_GRUB2=y
# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
pc_x86_64_bios_defconfig: increase ext2 filesystem size Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem size, the default size is now set to 60MB. However, this is too small for pc_x86_64_bios_defconfig. Indeed, the ext2 filesystem contains the kernel (4MB), the wireless modules (4MB), all firmware for wireless modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB) which brings the total to 70MB. Increase the filesystem size to 120000K, which is a nice and round number and leaves enough space for overhead on a 128MB flash drive. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-14 23:26:04 +02:00
BR2_TARGET_ROOTFS_EXT2_BLOCKS=120000
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
configs/pc_x86_64_{bios, efi}_defconfig: unbreak after qemu bump to linux-4.11 The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but they weren't adjusted when this was updated to use linux-4.11 in 28d97609b25 (configs/qemu: bump to the latest kernel version), breaking the build. Fix it by also moving them to linux-4.11.x. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-06-14 23:36:04 +02:00
# Linux headers same as kernel, a 4.11 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/pc_x86_64_{bios, efi}_defconfig: unbreak after qemu bump to linux-4.11 The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but they weren't adjusted when this was updated to use linux-4.11 in 28d97609b25 (configs/qemu: bump to the latest kernel version), breaking the build. Fix it by also moving them to linux-4.11.x. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-06-14 23:36:04 +02:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
configs/pc_x86_64_{bios,efi}_defconfig: use custom linux config Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs aren't taken into consideration when the qemu defconfigs are updated, breaking the build. Instead use a custom linux config for the pc defconfigs. With this, we also can get rid of the fragment file containing the delta fra the qemu config. Created by linux-update-defconfig (after turning of the fragment file). Also drop the linux kernel version number from the file name as it just causes extra noise whenever the kernel is bumped. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-06-15 11:25:26 +02:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
configs/pc_x86_64_{bios, efi}_defconfig: new samples Add two new sample defconfigs oriented towards real PC targets. It adds two variants for BIOS and EFI boot strategy. On the build side we enable eudev to autoload relevant kernel modules/support when necessary. It adds a bunch of drivers and extra filesystem support which is by no means extensive/complete, mostly geared towards the hardware i've got at hand to test with. This is accomplished by adding on top of the Qemu x86_64 kernel sample config. Build connman since by using eudev network interfaces get renamed on boot thus complicating any form of automatic and friendly bringup. It also makes Wi-Fi configuration/support easier. In principle these base defconfigs should work just fine for other storage media != pendrive like sata or ssd disk, however driver support isn't there quite yet, and pendrive is mostly supported by usb storage plus the usual usb host controller drivers. Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI). Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-29 20:26:53 +02:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
# Firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
# Packages
#
# Use connman so that networking setup is simpler, via connmanctl tool
# acpid is for seamless power button support
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_CONNMAN=y
BR2_PACKAGE_CONNMAN_CLIENT=y
BR2_PACKAGE_CONNMAN_WIFI=y
Reference in New Issue Copy Permalink