kumquat-buildroot/package/busybox/busybox.mk

189 lines
5.9 KiB
Makefile
Raw Normal View History

2002-04-26 13:45:55 +02:00
#############################################################
#
# busybox
#
#############################################################
2002-10-23 09:56:48 +02:00
ifeq ($(BR2_PACKAGE_BUSYBOX_SNAPSHOT),y)
BUSYBOX_VERSION = snapshot
BUSYBOX_SITE = http://www.busybox.net/downloads/snapshots
else
BUSYBOX_VERSION = $(call qstrip,$(BR2_BUSYBOX_VERSION))
BUSYBOX_SITE = http://www.busybox.net/downloads
2002-10-23 09:56:48 +02:00
endif
BUSYBOX_SOURCE = busybox-$(BUSYBOX_VERSION).tar.bz2
BUSYBOX_BUILD_CONFIG = $(BUSYBOX_DIR)/.config
# Allows the build system to tweak CFLAGS
BUSYBOX_MAKE_ENV = $(TARGET_MAKE_ENV) CFLAGS="$(TARGET_CFLAGS) -I$(LINUX_HEADERS_DIR)/include"
BUSYBOX_MAKE_OPTS = \
CC="$(TARGET_CC)" \
ARCH=$(KERNEL_ARCH) \
PREFIX="$(TARGET_DIR)" \
EXTRA_LDFLAGS="$(TARGET_LDFLAGS)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
CONFIG_PREFIX="$(TARGET_DIR)" \
SKIP_STRIP=y
ifndef BUSYBOX_CONFIG_FILE
BUSYBOX_CONFIG_FILE = $(call qstrip,$(BR2_PACKAGE_BUSYBOX_CONFIG))
endif
2002-04-26 13:45:55 +02:00
# If mdev will be used for device creation enable it and copy S10mdev to /etc/init.d
ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
define BUSYBOX_INSTALL_MDEV_SCRIPT
install -m 0755 package/busybox/S10mdev $(TARGET_DIR)/etc/init.d
endef
define BUSYBOX_INSTALL_MDEV_CONF
[ -f $(TARGET_DIR)/etc/mdev.conf ] || \
install -D -m 0644 package/busybox/mdev.conf \
$(TARGET_DIR)/etc/mdev.conf
endef
define BUSYBOX_SET_MDEV
$(call KCONFIG_ENABLE_OPT,CONFIG_MDEV,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_CONF,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_EXEC,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_LOAD_FIRMWARE,$(BUSYBOX_BUILD_CONFIG))
endef
endif
ifeq ($(BR2_LARGEFILE),y)
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_ENABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_DISABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If IPv6 is enabled then enable basic ifupdown support for it
2007-06-27 23:07:09 +02:00
ifeq ($(BR2_INET_IPV6),y)
define BUSYBOX_SET_IPV6
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
2007-06-27 23:07:09 +02:00
else
define BUSYBOX_SET_IPV6
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
2007-06-27 23:07:09 +02:00
endif
# If RPC is enabled then enable nfs mounts
ifeq ($(BR2_INET_RPC),y)
define BUSYBOX_SET_RPC
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MOUNT_NFS,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_RPC
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_MOUNT_NFS,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If we're using static libs do the same for busybox
ifeq ($(BR2_PREFER_STATIC_LIB),y)
define BUSYBOX_PREFER_STATIC
$(call KCONFIG_ENABLE_OPT,CONFIG_STATIC,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_PREFER_STATIC
$(call KCONFIG_DISABLE_OPT,CONFIG_STATIC,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of inetd if netkit-base package is selected
ifeq ($(BR2_PACKAGE_NETKITBASE),y)
define BUSYBOX_NETKITBASE
$(call KCONFIG_DISABLE_OPT,CONFIG_INETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of telnetd if netkit-telnetd package is selected
ifeq ($(BR2_PACKAGE_NETKITTELNET),y)
define BUSYBOX_NETKITTELNET
$(call KCONFIG_DISABLE_OPT,CONFIG_TELNETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
2002-10-23 09:56:48 +02:00
define BUSYBOX_COPY_CONFIG
cp -f $(BUSYBOX_CONFIG_FILE) $(BUSYBOX_BUILD_CONFIG)
endef
# Disable shadow passwords support if unsupported by the C library
ifeq ($(BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS),)
define BUSYBOX_INTERNAL_SHADOW_PASSWORDS
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_PWD_GRP,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_SHADOW,$(BUSYBOX_BUILD_CONFIG))
endef
endif
ifeq ($(BR2_USE_MMU),)
define BUSYBOX_DISABLE_MMU_APPLETS
$(call KCONFIG_DISABLE_OPT,CONFIG_SWAPONOFF,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_ASH,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_HUSH,$(BUSYBOX_BUILD_CONFIG))
endef
endif
define BUSYBOX_INSTALL_LOGGING_SCRIPT
if grep -q CONFIG_SYSLOGD=y $(@D)/.config; then \
$(INSTALL) -m 0755 -D package/busybox/S01logging \
$(TARGET_DIR)/etc/init.d/S01logging; \
else rm -f $(TARGET_DIR)/etc/init.d/S01logging; fi
endef
# We do this here to avoid busting a modified .config in configure
BUSYBOX_POST_EXTRACT_HOOKS += BUSYBOX_COPY_CONFIG
define BUSYBOX_CONFIGURE_CMDS
$(BUSYBOX_SET_SYSKLOGD)
$(BUSYBOX_SET_BB_PWD)
$(BUSYBOX_SET_LARGEFILE)
$(BUSYBOX_SET_IPV6)
$(BUSYBOX_SET_RPC)
$(BUSYBOX_PREFER_STATIC)
$(BUSYBOX_SET_MDEV)
$(BUSYBOX_NETKITBASE)
$(BUSYBOX_NETKITTELNET)
$(BUSYBOX_INTERNAL_SHADOW_PASSWORDS)
$(BUSYBOX_DISABLE_MMU_APPLETS)
@yes "" | $(MAKE) ARCH=$(KERNEL_ARCH) CROSS_COMPILE="$(TARGET_CROSS)" \
-C $(@D) oldconfig
endef
define BUSYBOX_BUILD_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D)
endef
2006-12-13 10:14:10 +01:00
define BUSYBOX_INSTALL_TARGET_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) install
if [ ! -f $(TARGET_DIR)/usr/share/udhcpc/default.script ]; then \
$(INSTALL) -m 0755 -D package/busybox/udhcpc.script \
$(TARGET_DIR)/usr/share/udhcpc/default.script; \
fi
$(BUSYBOX_INSTALL_MDEV_SCRIPT)
$(BUSYBOX_INSTALL_MDEV_CONF)
$(BUSYBOX_INSTALL_LOGGING_SCRIPT)
endef
define BUSYBOX_UNINSTALL_TARGET_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) uninstall
endef
define BUSYBOX_CLEAN_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) clean
endef
$(eval $(call GENTARGETS))
busybox-menuconfig busybox-xconfig busybox-gconfig: busybox-patch
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(BUSYBOX_DIR) \
$(subst busybox-,,$@)
rm -f $(BUSYBOX_DIR)/.stamp_built
rm -f $(BUSYBOX_DIR)/.stamp_target_installed
busybox-update:
cp -f $(BUSYBOX_BUILD_CONFIG) $(BUSYBOX_CONFIG_FILE)