NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
17d2c6d5db
kumquat-buildroot/package/openocd/openocd.mk

104 lines
4.2 KiB
Makefile
Raw Normal View History

Normalize separator size to 80 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-06 01:53:30 +02:00
################################################################################
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
#
# openocd
#
Normalize separator size to 80 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-06 01:53:30 +02:00
################################################################################
packages: remove all := signs Finally get rid of all := used for variable definitions in packages, as we suggest in our manual and during the review of new packages. While I was at it, I also sometimes added a few missing new lines between the header and the first variable definition. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-20 10:45:47 +01:00
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
OPENOCD_VERSION = 0.8.0
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
remove rest of the BR2_SOURCEFORGE_MIRROR references Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-26 01:52:48 +02:00
OPENOCD_SITE = http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
packages: rename FOO_CONF_OPT into FOO_CONF_OPTS To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS, make the same change for FOO_CONF_OPT. Sed command used: find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g' Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-09-27 21:32:44 +02:00
OPENOCD_CONF_OPTS = \
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
--oldincludedir=$(STAGING_DIR)/usr/include \
--includedir=$(STAGING_DIR)/usr/include \
--disable-doxygen-html \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
--with-jim-shared=no \
--disable-shared \
openocd: pass --disable-werror to fix build issues Should fix: http://autobuild.buildroot.org/results/91d/91d2ae34f14f1978e0985e75f803055d51201a93/ and similar build problems. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 20:32:47 +01:00
--enable-dummy \
--disable-werror
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
# Rely on the Config.in options of each individual adapter selecting
# the dependencies they need.
OPENOCD_DEPENDENCIES = \
package/openocd: depends on libftdi1 instead of libftdi Note that, if both libftdi and libftdi1 are available, openocd will prefer libftdi1, so does Buildroot. ;-) Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-17 18:36:36 +01:00
$(if $(BR2_PACKAGE_LIBFTDI1),libftdi1) \
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
$(if $(BR2_PACKAGE_LIBUSB),libusb) \
$(if $(BR2_PACKAGE_LIBUSB_COMPAT),libusb-compat) \
$(if $(BR2_PACKAGE_LIBHID),libhid)
package: add openocd support with only the following Adapters - FTDI FT2xxx/FT4xxx - J-Link (Segger and Atmel SAM-ICE) - Versaloon-Link JTAG Adapter [Peter: Config.in tweaks] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-20 13:19:52 +02:00
# Adapters
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
OPENOCD_CONF_OPTS += \
package/openocd: explicitly disable unselected adapters Some adapters are automatically enabled, but may not be built because of missing (archecture) dependencies. So, just set the options symetrically. Signed-off-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 22:19:26 +01:00
$(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi,--disable-ftdi) \
$(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink,--disable-stlink) \
$(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi,--disable-ti-icdi) \
$(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink,--disable-ulink) \
$(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2,--disable-usb-blaster-2) \
$(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink,--disable-jlink) \
$(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm,--disable-osbdm) \
$(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous,--disable-opendous) \
$(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice,--disable-aice) \
$(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink,--disable-vsllink) \
$(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog,--disable-usbprog) \
$(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink,--disable-rlink) \
$(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew,--disable-armjtagew) \
$(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap,--disable-cmsis-dap) \
$(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport,--disable-parport) \
$(if $(BR2_PACKAGE_OPENOCD_FT2XXX),--enable-legacy-ft2232_libftdi,--disable-legacy-ft2232_libftdi) \
$(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi,--disable-jtag_vpi) \
$(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb_blaster_libftdi,--disable-usb_blaster_libftdi) \
$(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel,--disable-amjtagaccel) \
$(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master,--disable-zy1000-master) \
$(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000,--disable-zy1000) \
$(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx,--disable-ep93xx) \
$(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200,--disable-at91rm9200) \
$(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio,--disable-bcm2835gpio) \
$(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012,--disable-gw16012) \
$(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto_libftdi,--disable-presto_libftdi) \
$(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag_ftdi,--disable-openjtag_ftdi) \
$(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate,--disable-buspirate) \
$(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio,--disable-sysfsgpio)
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
# Enable all configuration options for host build.
#
# Note that deprecated options have been removed. CMSIS_DAP needs
# hidapi (currently not included in buildroot) and zy1000 stuff fails
# to build, so they've been removed too.
#
HOST_OPENOCD_CONF_OPTS = \
--enable-ftdi \
--enable-stlink \
--enable-ti-icdi \
--enable-ulink \
--enable-usb-blaster-2 \
--enable-jlink \
--enable-osbdm \
--enable-opendous \
--enable-aice \
--enable-vsllink \
--enable-usbprog \
--enable-rlink \
--enable-armjtagew \
--enable-parport \
--enable-jtag_vpi \
--enable-usb_blaster_libftdi \
--enable-amtjtagaccel \
--enable-gw16012 \
--enable-presto_libftdi \
--enable-openjtag_ftdi \
--enable-buspirate \
--enable-sysfsgpio \
--oldincludedir=$(HOST_DIR)/usr/include \
--includedir=$(HOST_DIR)/usr/include \
--disable-doxygen-html \
--with-jim-shared=no \
--disable-shared \
openocd: pass --disable-werror to fix build issues Should fix: http://autobuild.buildroot.org/results/91d/91d2ae34f14f1978e0985e75f803055d51201a93/ and similar build problems. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-02 20:32:47 +01:00
--enable-dummy \
--disable-werror
openocd: bump to version 0.8.0 This patch adds the management of (almost) all the config options of openocd 0.8.0. A BR config variable is added for (almost) every adapter known to openocd and all the dependencies are automatically calculated from the chosen adapters, so only the necessary libraries are built. Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is not actually included in buildroot, so it has been removed. Also zy1000 adapters are actually broken in openocd and have been removed. The host version of the package enables all the possible adapters and the related libraries. [Thomas: - Slightly fixup the commit log. - Rename the patches to the new patch naming convention. - Update hash file using a contribution from Vincent Stehlé. - Move the thread dependency from the OpenOCD option down to each sub-option that actually needs it (when it needs libusb, libusb-compat or libftdi). We keep only one comment, as we would otherwise have to add too many repeatitive comments. - Remove commented options. - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting BR2_PACKAGE_LIBFTDI. - Remove trailing white spaces. - Pass -std=gnu99, needed to build with a basic toolchain. - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in a more compact way. - Adjust indentation for HOST_OPENOCD_CONF_OPTS. - Reword the comment above HOST_OPENOCD_CONF_OPTS.] Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-14 20:02:17 +01:00
HOST_OPENOCD_DEPENDENCIES = host-libftdi host-libusb host-libusb-compat
openocd: add host variant Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-01-28 18:42:54 +01:00
all packages: rename XXXTARGETS to xxx-package Also remove the redundant $(call ...). This is a purely mechanical change, performed with find package linux toolchain boot -name \*.mk | \ xargs sed -i -e 's/$(eval $(call GENTARGETS))/$(eval $(generic-package))/' \ -e 's/$(eval $(call AUTOTARGETS))/$(eval $(autotools-package))/' \ -e 's/$(eval $(call CMAKETARGETS))/$(eval $(cmake-package))/' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-03 00:07:32 +02:00
$(eval $(autotools-package))
all packages: use new host-xxx-package macros This is a purely mechanical change, performed with find package linux toolchain boot -name \*.mk | \ xargs sed -i -e 's/$(eval $(call GENTARGETS,host))/$(eval $(host-generic-package))/' \ -e 's/$(eval $(call AUTOTARGETS,host))/$(eval $(host-autotools-package))/' \ -e 's/$(eval $(call CMAKETARGETS,host))/$(eval $(host-cmake-package))/' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-03 00:06:54 +02:00
$(eval $(host-autotools-package))
Reference in New Issue Copy Permalink