kumquat-buildroot/toolchain/gcc/gcc-uclibc-4.x.mk

# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

# sysroot support works with gcc >= 4.2.0 only
ifeq ($(BR2_TOOLCHAIN_SYSROOT),y)

ifeq ($(GCC_SNAP_DATE),)
GCC_OFFICIAL_VER:=$(GCC_VERSION)
GCC_SITE:=$(BR2_GNU_MIRROR)/gcc/gcc-$(GCC_VERSION)
#GCC_SITE:=ftp://ftp.ibiblio.org/pub/mirrors/gnu/ftp/gnu/gcc/gcc-$(GCC_OFFICIAL_VER)
else
GCC_OFFICIAL_VER:=$(GCC_VERSION)-$(GCC_SNAP_DATE)
GCC_SITE:=ftp://sources.redhat.com/pub/gcc/snapshots/$(GCC_OFFICIAL_VER)
endif

# redefine if using an external prepatched gcc source
ifneq ($(BR2_TOOLCHAIN_BUILDROOT),y)
GCC_SITE:=$(VENDOR_SITE)
GCC_OFFICIAL_VER:=$(GCC_VERSION)$(VENDOR_SUFFIX)$(VENDOR_GCC_RELEASE)
GCC_PATCH_DIR:=$(VENDOR_PATCH_DIR)/gcc-$(GCC_OFFICIAL_VER)
endif #!BR2_TOOLCHAIN_BUILDROOT

# define patch location
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) # Normal toolchain
ifeq ($(GCC_SNAP_DATE),) # Not a snapshot
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION)
else # Is a snapshot
ifneq ($(wildcard toolchain/gcc/$(GCC_OFFICIAL_VER)),) # Snapshot patch?
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_OFFICIAL_VER)
else # Normal patch to snapshot
# Use the normal location, if the dedicated location does not exist
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION)
endif # Snapshot patch
endif # Not a snapshot
endif # BR2_TOOLCHAIN_BUILDROOT

GCC_SOURCE:=gcc-$(GCC_OFFICIAL_VER).tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_OFFICIAL_VER)
GCC_CAT:=$(BZCAT)
GCC_STRIP_HOST_BINARIES:=nope
GCC_SRC_DIR:=$(GCC_DIR)

ifeq ($(findstring x3.,x$(GCC_VERSION)),x3.)
GCC_NO_MPFR:=y
endif
ifeq ($(findstring x4.0.,x$(GCC_VERSION)),x4.0.)
GCC_NO_MPFR:=y
endif

GCC_TARGET_PREREQ=
GCC_STAGING_PREREQ=

#############################################################
#
# Setup some initial stuff
#
#############################################################

GCC_STAGING_PREREQ+=$(STAGING_DIR)/usr/lib/libc.a

GCC_TARGET_LANGUAGES:=c

GCC_CROSS_LANGUAGES:=c
ifeq ($(BR2_GCC_CROSS_CXX),y)
GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),c++
endif
ifeq ($(BR2_GCC_CROSS_FORTRAN),y)
GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),fortran
endif
ifeq ($(BR2_GCC_CROSS_OBJC),y)
GCC_CROSS_LANGUAGES:=$(GCC_CROSS_LANGUAGES),objc
endif

GCC_COMMON_PREREQ=$(wildcard $(BR2_DEPENDS_DIR)/br2/install/libstdcpp*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/install/libgcj*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/install/objc*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/install/fortran*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/install/libstdcpp*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/prefer/ima*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/toolchain/sysroot*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/use/sjlj/exceptions*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/gcc/shared/libgcc*)
GCC_TARGET_PREREQ+=$(GCC_COMMON_PREREQ) \
$(wildcard $(BR2_DEPENDS_DIR)/br2/extra/target/gcc/config/options*)
GCC_STAGING_PREREQ+=$(GCC_COMMON_PREREQ) \
$(wildcard $(BR2_DEPENDS_DIR)/br2/extra/gcc/config/options*)\
$(wildcard $(BR2_DEPENDS_DIR)/br2/gcc/cross/*)

ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),c++
endif

ifeq ($(BR2_INSTALL_LIBGCJ),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),java
endif

ifeq ($(BR2_INSTALL_OBJC),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),objc
endif

ifndef GCC_NO_MPFR
GCC_WITH_HOST_GMP=--with-gmp=$(GMP_HOST_DIR)
GCC_WITH_HOST_MPFR=--with-mpfr=$(MPFR_HOST_DIR)

ifeq ($(BR2_INSTALL_FORTRAN),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),fortran
#GCC_TARGET_PREREQ+=$(TARGET_DIR)/usr/lib/libmpfr.so $(TARGET_DIR)/usr/lib/libgmp.so
#GCC_STAGING_PREREQ+=$(TOOL_BUILD_DIR)/mpfr/lib/libmpfr.so
GCC_WITH_TARGET_GMP=--with-gmp="$(GMP_TARGET_DIR)"
GCC_WITH_TARGET_MPFR=--with-mpfr="$(MPFR_TARGET_DIR)"
endif
endif # ifndef GCC_NO_MPFR

ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
GCC_SHARED_LIBGCC:=--enable-shared
else
GCC_SHARED_LIBGCC:=--disable-shared
endif

ifneq ($(BR2_ENABLE_LOCALE),y)
GCC_ENABLE_CLOCALE:=--disable-clocale
endif

ifeq ($(BR2_KERNEL_HURD),y)
EXTRA_GCC1_CONFIG_OPTIONS+=--without-headers
endif

HOST_SOURCE+=gcc-source

$(DL_DIR)/$(GCC_SOURCE):
	mkdir -p $(DL_DIR)
	$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)

gcc-unpacked: $(GCC_DIR)/.patched
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
	mkdir -p $(TOOL_BUILD_DIR)
	rm -rf $(GCC_DIR)
	$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) -
	$(CONFIG_UPDATE) $(GCC_DIR)
	touch $@

gcc-patched: $(GCC_DIR)/.patched
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
	# Apply any files named gcc-*.patch from the source directory to gcc
	toolchain/patch-kernel.sh $(GCC_DIR) $(GCC_PATCH_DIR) \*.patch

	# Note: The soft float situation has improved considerably with gcc 3.4.x.
	# We can dispense with the custom spec files, as well as libfloat for the arm case.
	# However, we still need a patch for arm. There's a similar patch for gcc 3.3.x
	# which needs to be integrated so we can kill of libfloat for good, except for
	# anyone (?) who might still be using gcc 2.95. mjn3
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ("$(strip $(ARCH))","arm")
	toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
endif
ifeq ("$(strip $(ARCH))","armeb")
	toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
endif
	# Not yet updated to 3.4.1.
	#ifeq ("$(strip $(ARCH))","i386")
	#toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc i386-gcc-soft-float.patch
	#endif
endif
	touch $@

#############################################################
#
# build the first pass gcc compiler
#
#############################################################
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-initial


# The --without-headers option stopped working with gcc 3.0 and has never been
# fixed, so we need to actually have working C library header files prior to
# the step or libgcc will not build...

$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
	mkdir -p $(GCC_BUILD_DIR1)
	(cd $(GCC_BUILD_DIR1); rm -rf config.cache; \
		$(HOST_CONFIGURE_OPTS) \
		$(GCC_DIR)/configure \
		--prefix=$(STAGING_DIR)/usr \
		--build=$(GNU_HOST_NAME) \
		--host=$(GNU_HOST_NAME) \
		--target=$(REAL_GNU_TARGET_NAME) \
		--enable-languages=c \
		$(BR2_CONFIGURE_DEVEL_SYSROOT) \
		--disable-__cxa_atexit \
		--enable-target-optspace \
		--with-gnu-ld \
		--disable-shared \
		$(GCC_WITH_HOST_GMP) \
		$(GCC_WITH_HOST_MPFR) \
		$(DISABLE_NLS) \
		$(THREADS) \
		$(MULTILIB) \
		$(SOFT_FLOAT_CONFIG_OPTION) \
		$(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
		$(EXTRA_GCC_CONFIG_OPTIONS) \
		$(EXTRA_GCC1_CONFIG_OPTIONS) \
	)
	touch $@

$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
	$(MAKE) -C $(GCC_BUILD_DIR1) all-gcc
	touch $@

gcc_initial=$(GCC_BUILD_DIR1)/.installed
$(gcc_initial) $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
	PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR1) install-gcc
	touch $(gcc_initial)

gcc_initial: uclibc-configured binutils $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc

gcc_initial-clean:
	rm -rf $(GCC_BUILD_DIR1)

gcc_initial-dirclean:
	rm -rf $(GCC_BUILD_DIR1) $(GCC_DIR)

#############################################################
#
# second pass compiler build. Build the compiler targeting
# the newly built shared uClibc library.
#
#############################################################
#
# Sigh... I had to rework things because using --with-gxx-include-dir
# causes issues with include dir search order for g++. This seems to
# have something to do with "path translations" and possibly doesn't
# affect gcc-target. However, I haven't tested gcc-target yet so no
# guarantees. mjn3

GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-final
$(GCC_BUILD_DIR2)/.configured: $(GCC_SRC_DIR)/.patched $(GCC_STAGING_PREREQ)
	mkdir -p $(GCC_BUILD_DIR2)
	# Important! Required for limits.h to be fixed.
	ln -snf ../include/ $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/sys-include
	#-rmdir $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
	#ln -snf ../lib $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
	(cd $(GCC_BUILD_DIR2); rm -rf config.cache; \
		$(HOST_CONFIGURE_OPTS) \
		$(GCC_SRC_DIR)/configure \
		--prefix=$(BR2_SYSROOT_PREFIX)/usr \
		--build=$(GNU_HOST_NAME) \
		--host=$(GNU_HOST_NAME) \
		--target=$(REAL_GNU_TARGET_NAME) \
		--enable-languages=$(GCC_CROSS_LANGUAGES) \
		$(BR2_CONFIGURE_STAGING_SYSROOT) \
		$(BR2_CONFIGURE_BUILD_TOOLS) \
		--disable-__cxa_atexit \
		--enable-target-optspace \
		--with-gnu-ld \
		$(GCC_SHARED_LIBGCC) \
		$(GCC_WITH_HOST_GMP) \
		$(GCC_WITH_HOST_MPFR) \
		$(DISABLE_NLS) \
		$(THREADS) \
		$(MULTILIB) \
		$(SOFT_FLOAT_CONFIG_OPTION) \
		$(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
		$(GCC_USE_SJLJ_EXCEPTIONS) \
		$(DISABLE_LARGEFILE) \
		$(EXTRA_GCC_CONFIG_OPTIONS) \
		$(EXTRA_GCC2_CONFIG_OPTIONS) \
	)
	touch $@

$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
	$(MAKE) -C $(GCC_BUILD_DIR2) all
	touch $@

$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
	PATH=$(TARGET_PATH) $(MAKE) $(BR2_SYSROOT_STAGING_DESTDIR) \
		-C $(GCC_BUILD_DIR2) install
	if [ -d "$(STAGING_DIR)/lib64" ]; then \
		if [ ! -e "$(STAGING_DIR)/lib" ]; then \
			mkdir -p "$(STAGING_DIR)/lib"; \
		fi; \
		mv "$(STAGING_DIR)/lib64/"* "$(STAGING_DIR)/lib/"; \
		rmdir "$(STAGING_DIR)/lib64"; \
	fi
	# Strip the host binaries
ifeq ($(GCC_STRIP_HOST_BINARIES),true)
	strip --strip-all -R .note -R .comment $(filter-out %-gccbug,$(wildcard $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-*))
endif
	# Make sure we have 'cc'.
	if [ ! -e $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-cc ]; then \
		ln -snf $(REAL_GNU_TARGET_NAME)-gcc \
			$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-cc; \
	fi
	if [ ! -e $(STAGING_DIR)/usr/bin/cc ]; then \
		ln -snf gcc $(STAGING_DIR)/usr/bin/cc; \
	fi
	# Set up the symlinks to enable lying about target name.
	set -e; \
	(cd $(STAGING_DIR); \
		ln -snf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
		cd usr/bin; \
		for app in $(REAL_GNU_TARGET_NAME)-*; do \
			ln -snf $${app} \
			$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
		done; \
	)
	#
	# Now for the ugly 3.3.x soft float hack...
	#
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
	# Make sure we have a soft float specs file for this arch
	if [ ! -f toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float ]; then \
		echo soft float configured but no specs file for this arch; \
		/bin/false; \
	fi
	# Replace specs file with one that defaults to soft float mode.
	if [ ! -f $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ]; then \
		echo staging dir specs file is missing; \
		/bin/false; \
	fi
	cp toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
endif
	#
	# Ok... that's enough of that.
	#
	mkdir -p $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/sbin
	touch $@

$(GCC_BUILD_DIR2)/.libs_installed: $(GCC_BUILD_DIR2)/.installed
ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
	# These are in /lib, so...
	rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
	-cp -dpf $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib/libgcc_s* \
		$(TARGET_DIR)/lib/
endif
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
ifeq ($(BR2_GCC_SHARED_LIBGCC),y)
	-cp -dpf $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.so* \
		$(TARGET_DIR)/usr/lib/
endif
endif
ifeq ($(BR2_INSTALL_LIBGCJ),y)
	cp -dpf $(STAGING_DIR)/lib/libgcj.so* $(TARGET_DIR)/lib/
	cp -dpf $(STAGING_DIR)/lib/lib-org-w3c-dom.so* $(TARGET_DIR)/lib/
	cp -dpf $(STAGING_DIR)/lib/lib-org-xml-sax.so* $(TARGET_DIR)/lib/
	mkdir -p $(TARGET_DIR)/usr/lib/security
	cp -dpf $(STAGING_DIR)/usr/lib/security/libgcj.security \
		$(TARGET_DIR)/usr/lib/security/
	cp -dpf $(STAGING_DIR)/usr/lib/security/classpath.security \
		$(TARGET_DIR)/usr/lib/security/
endif
	touch $@

cross_compiler:=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-gcc
cross_compiler gcc: uclibc-configured binutils gcc_initial \
	$(LIBFLOAT_TARGET) uclibc \
	$(GCC_BUILD_DIR2)/.installed $(GCC_BUILD_DIR2)/.libs_installed \
	$(GCC_TARGETS)

gcc-source: $(DL_DIR)/$(GCC_SOURCE)

gcc-clean:
	rm -rf $(GCC_BUILD_DIR2)
	for prog in cpp gcc gcc-[0-9]* protoize unprotoize gcov gccbug cc; do \
		rm -f $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-$$prog; \
		rm -f $(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-$$prog; \
	done

gcc-dirclean: gcc_initial-dirclean
	rm -rf $(GCC_BUILD_DIR2)

#############################################################
#
# Next build target gcc compiler
#
#############################################################
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target

$(GCC_BUILD_DIR3)/.prepared: $(GCC_BUILD_DIR2)/.libs_installed $(GCC_TARGET_PREREQ)
	mkdir -p $(GCC_BUILD_DIR3)
	touch $@

$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR3)/.prepared
	(cd $(GCC_BUILD_DIR3); rm -rf config.cache; \
		$(TARGET_CONFIGURE_OPTS) \
		$(TARGET_CONFIGURE_ARGS) \
		$(TARGET_GCC_FLAGS) \
		$(GCC_SRC_DIR)/configure \
		--prefix=/usr \
		--build=$(GNU_HOST_NAME) \
		--host=$(REAL_GNU_TARGET_NAME) \
		--target=$(REAL_GNU_TARGET_NAME) \
		--enable-languages=$(GCC_TARGET_LANGUAGES) \
		--with-gxx-include-dir=/usr/include/c++ \
		--disable-__cxa_atexit \
		--with-gnu-ld \
		$(GCC_SHARED_LIBGCC) \
		$(GCC_WITH_TARGET_GMP) \
		$(GCC_WITH_TARGET_MPFR) \
		$(DISABLE_NLS) \
		$(THREADS) \
		$(MULTILIB) \
		$(SOFT_FLOAT_CONFIG_OPTION) \
		$(GCC_WITH_ABI) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
		$(GCC_USE_SJLJ_EXCEPTIONS) \
		$(DISABLE_LARGEFILE) \
		$(EXTRA_GCC_CONFIG_OPTIONS) \
		$(EXTRA_TARGET_GCC_CONFIG_OPTIONS) \
		$(EXTRA_GCC3_CONFIG_OPTIONS) \
	)
	touch $@

$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
	PATH=$(TARGET_PATH) \
	$(MAKE) -C $(GCC_BUILD_DIR3) all
	touch $@

#
# gcc-lib dir changes names to gcc with 3.4.mumble
#
ifeq ($(findstring 3.4.,$(GCC_VERSION)),3.4.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
else
GCC_LIB_SUBDIR=lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
# sigh... we need to find a better way
ifeq ($(findstring 4.0.,$(GCC_VERSION)),4.0.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
ifeq ($(findstring 4.1.,$(GCC_VERSION)),4.1.)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
ifeq ($(findstring 4.2,$(GCC_VERSION)),4.2)
ifneq ($(findstring 4.2.,$(GCC_VERSION)),4.2.)
REAL_GCC_VERSION=$(shell cat $(GCC_SRC_DIR)/gcc/BASE-VER)
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(REAL_GCC_VERSION)
else
GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
endif
endif

$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
	PATH=$(TARGET_PATH) DESTDIR=$(TARGET_DIR) \
		$(MAKE1) -C $(GCC_BUILD_DIR3) install
	# Remove broken specs file (cross compile flag is set).
	rm -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/specs
	#
	# Now for the ugly 3.3.x soft float hack...
	#
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
	# Add a specs file that defaults to soft float mode.
	cp toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
	# Make sure gcc does not think we are cross compiling
	$(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
endif
	#
	# Ok... that's enough of that.
	#
	-(cd $(TARGET_DIR)/bin && find -type f | xargs $(STRIPCMD) > /dev/null 2>&1)
	-(cd $(TARGET_DIR)/usr/bin && find -type f | xargs $(STRIPCMD) > /dev/null 2>&1)
	-(cd $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR) && $(STRIPCMD) cc1 cc1plus collect2 > /dev/null 2>&1)
	-(cd $(TARGET_DIR)/usr/lib && $(STRIPCMD) libstdc++.so.*.*.* > /dev/null 2>&1)
	-(cd $(TARGET_DIR)/lib && $(STRIPCMD) libgcc_s*.so.*.*.* > /dev/null 2>&1)
	#
	rm -f $(TARGET_DIR)/usr/lib/*.la*
	#rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
	#	$(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
	# Work around problem of missing syslimits.h
	if [ ! -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/syslimits.h ]; then \
		echo "warning: working around missing syslimits.h"; \
		cp -f $(STAGING_DIR)/$(GCC_LIB_SUBDIR)/include/syslimits.h \
			$(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/; \
	fi
	# Make sure we have 'cc'.
	if [ ! -e $(TARGET_DIR)/usr/bin/cc ]; then \
		ln -snf gcc $(TARGET_DIR)/usr/bin/cc; \
	fi
	# These are in /lib, so...
	#rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so*
	touch -c $@

gcc_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc

gcc_target-clean:
	rm -rf $(GCC_BUILD_DIR3)
	rm -f $(TARGET_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)*

gcc_target-dirclean:
	rm -rf $(GCC_BUILD_DIR3)

endif
# gcc-4.x only