kumquat-buildroot/board/nexbox/a95x/post-build.sh

#!/bin/sh

BOARD_DIR="$(dirname $0)"
MKIMAGE=$HOST_DIR/bin/mkimage

$MKIMAGE -C none -A arm64 -T script -d $BOARD_DIR/boot.txt $BINARIES_DIR/boot.scr

# vendor u-boot uses uImage
if [ -e $BINARIES_DIR/Image ]; then
    $MKIMAGE -A arm64 -O linux -T kernel -C none -a 0x1080000 -e 0x1080000 \
	     -n linux -d $BINARIES_DIR/Image $BINARIES_DIR/uImage
fi
board: add support for nexbox a95x Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC (quad A53), 8/16GB eMMC and 1/2GB RAM. Both the s905 (gxbb) and s905x (gxl) variant is supported. This defconfig uses mainline Linux. As the mainline support for s905 is quite young, use the latest release candidate. There is currently no support for this board in U-Boot or sources available for the vendor U-Boot, so the defconfig doesn't build a u-boot and instead uses the existing U-Boot available in the eMMC. This also means that we need to wrap the kernel as uImage, which isn't suppported for aarch64. Instead this is done in the post-build script. Mainline aarch64 defconfig builds most drivers modular, so add mdev for module autoloading. [Peter: explicitly set BR2_cortex_a53=y] Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2017-02-17 17:33:10 +01:00			`#!/bin/sh`

			`BOARD_DIR="$(dirname $0)"`
boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts Since things are no longer installed in $(HOST_DIR)/usr, the callers should also not refer to it. This is a mechanical change with git grep -l 'HOST_DIR}\?/usr/' board \| xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 2017-07-05 13:14:26 +02:00			`MKIMAGE=$HOST_DIR/bin/mkimage`
board: add support for nexbox a95x Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC (quad A53), 8/16GB eMMC and 1/2GB RAM. Both the s905 (gxbb) and s905x (gxl) variant is supported. This defconfig uses mainline Linux. As the mainline support for s905 is quite young, use the latest release candidate. There is currently no support for this board in U-Boot or sources available for the vendor U-Boot, so the defconfig doesn't build a u-boot and instead uses the existing U-Boot available in the eMMC. This also means that we need to wrap the kernel as uImage, which isn't suppported for aarch64. Instead this is done in the post-build script. Mainline aarch64 defconfig builds most drivers modular, so add mdev for module autoloading. [Peter: explicitly set BR2_cortex_a53=y] Signed-off-by: Peter Korsgaard <peter@korsgaard.com> 2017-02-17 17:33:10 +01:00
			`$MKIMAGE -C none -A arm64 -T script -d $BOARD_DIR/boot.txt $BINARIES_DIR/boot.scr`

			`# vendor u-boot uses uImage`
			`if [ -e $BINARIES_DIR/Image ]; then`
			`$MKIMAGE -A arm64 -O linux -T kernel -C none -a 0x1080000 -e 0x1080000 \`
			`-n linux -d $BINARIES_DIR/Image $BINARIES_DIR/uImage`
			`fi`