NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0d48a91f9e
kumquat-buildroot/configs/orangepi_zero_plus2_defconfig

65 lines
2.1 KiB
Plaintext
Raw Normal View History

board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV4=y
configs/orangepi_zero_plus2_defconfig: bump BSP versions Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc driver has been switched to asynchronous probe. As a result, mmc indexes can be shuffled breaking board boot. Add patch that pins mmc indexes to their original ordered values. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-01-27 07:05:20 +01:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
configs/orange-pi-zero-plus2: enable WiFi support Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add DTS patch enabling AP6212 WiFi/BT combo support -- this patch is on its way to mainline Linux v4.16 - enable WiFi support in kernel config - enable Broadcom brcmfmac kernel driver in kernel config - add Broadcom wireless firmware package to image - add basic wireless tools to image - add mdev to image to enable module autoloading - add rootfs overlay with proper NVRAM file for on-board AP6212 chip Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-11 16:56:49 +01:00
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay"
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
configs/orangepi_zero_plus2_defconfig: switch to mainline TF-A Switch to mainline TF-A that provides basic support for H5 and A64. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-06-25 21:33:17 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64"
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/orangepi_zero_plus2_defconfig: bump BSP versions Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc driver has been switched to asynchronous probe. As a result, mmc indexes can be shuffled breaking board boot. Add patch that pins mmc indexes to their original ordered values. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-01-27 07:05:20 +01:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
configs/orangepi_zero_plus2_defconfig: bump BSP versions Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc driver has been switched to asynchronous probe. As a result, mmc indexes can be shuffled breaking board boot. Add patch that pins mmc indexes to their original ordered values. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-01-27 07:05:20 +01:00
BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
configs/orangepi_zero_plus2: U-Boot needs pylibfdt When building U-Boot for this platform: unable to execute 'swig': No such file or directory error: command 'swig' failed with exit status 1 scripts/dtc/pylibfdt/Makefile:26: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/123771103 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-22 10:41:48 +01:00
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
defconfigs: use BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_ For defconfigs that create a boot script, add the host package uboot-tools and update the script variable names. Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that are not manually formatted (i.e. just the result of 'make savedefconfig'), this puts them in the wrong place. However, it's easier this way, and it's more consistent in general to have the definition of the script close to BR2_TARGET_UBOOT itself. Special cases: - nanopi_* had the definition of the _SCRIPT variable in a weird place. These are moved to close to BR2_TARGET_UBOOT. - Same for orangepi_plus. - orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not added there. Related to db2b6841263c3062fa1661dcfda3110415779fa2 Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2020-10-07 15:20:51 +02:00
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-plus2/boot.cmd"
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/orangepi_zero_plus2_defconfig: bump BSP versions Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc driver has been switched to asynchronous probe. As a result, mmc indexes can be shuffled breaking board boot. Add patch that pins mmc indexes to their original ordered values. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-01-27 07:05:20 +01:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.10"
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"
configs/orange-pi-zero-plus2: enable WiFi support Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add DTS patch enabling AP6212 WiFi/BT combo support -- this patch is on its way to mainline Linux v4.16 - enable WiFi support in kernel config - enable Broadcom brcmfmac kernel driver in kernel config - add Broadcom wireless firmware package to image - add basic wireless tools to image - add mdev to image to enable module autoloading - add rootfs overlay with proper NVRAM file for on-board AP6212 chip Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-11 16:56:49 +01:00
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero-plus2/linux-extras.config"
configs/orangepi_zero_plus2: needs host-openssl to build Linux Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/125631911 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-11-27 09:08:40 +01:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/orange-pi-zero-plus2: enable WiFi support Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add DTS patch enabling AP6212 WiFi/BT combo support -- this patch is on its way to mainline Linux v4.16 - enable WiFi support in kernel config - enable Broadcom brcmfmac kernel driver in kernel config - add Broadcom wireless firmware package to image - add basic wireless tools to image - add mdev to image to enable module autoloading - add rootfs overlay with proper NVRAM file for on-board AP6212 chip Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-02-11 16:56:49 +01:00
# wireless firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
# wireless tools
BR2_PACKAGE_IW=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
board: Add Orangepi Zero Plus2 support Add initial support for Orangepi Zero Plus2 board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 10:53:38 +01:00
# Filesystem
BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus2"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-zero-plus2/genimage.cfg"
Reference in New Issue Copy Permalink