NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
master
kumquat-buildroot/configs/avenger96_defconfig

53 lines
1.9 KiB
Plaintext
Raw Permalink Normal View History

configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Architecture
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_arm=y
BR2_cortex_a7=y
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Linux headers same as kernel, a 5.8 series
configs/avenger96_defconfig: bump Linux version to 6.6.22 LTS This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board. Beside that, In accordance with the kernel 6.5rc1 commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") the device tree path also has been modified to point the device tree in the proper location. As another change, due to commit 3108eb2e8aa7 ("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and eMMC probing has swapped. The SD card is now mmcblk0 instead of mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf' file in the overlay directory of the board is changed, otherwise the rootfs was not possible to be detected. Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:43 +01:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# System configuration
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_ROOTFS_OVERLAY="board/arrow/avenger96/overlay/"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp157/post-image.sh"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Kernel
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/avenger96_defconfig: bump Linux version to 6.6.22 LTS This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board. Beside that, In accordance with the kernel 6.5rc1 commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") the device tree path also has been modified to point the device tree in the proper location. As another change, due to commit 3108eb2e8aa7 ("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and eMMC probing has swapped. The SD card is now mmcblk0 instead of mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf' file in the overlay directory of the board is changed, otherwise the rootfs was not possible to be detected. Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:43 +01:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.22"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/avenger96_defconfig: bump Linux version to 6.6.22 LTS This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board. Beside that, In accordance with the kernel 6.5rc1 commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") the device tree path also has been modified to point the device tree in the proper location. As another change, due to commit 3108eb2e8aa7 ("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and eMMC probing has swapped. The SD card is now mmcblk0 instead of mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf' file in the overlay directory of the board is changed, otherwise the rootfs was not possible to be detected. Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:43 +01:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32mp157a-dhcor-avenger96"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
configs/avenger96_defconfig: linux build needs host-openssl Fixes the gitlab build: https://gitlab.com/buildroot.org/buildroot/-/jobs/1019385566/ HOSTCC scripts/extract-cert scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-11 14:23:11 +01:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Filesystem
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Bootloaders
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
configs/avenger96_defconfig: bump ATF version to v2.8 LTS This patch upgrades the ATF version to the v2.8 LTS version. Please note that due to DTS changes from upstream commit 51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build variable is also modified to use the new DTS file. Note that the old DTS file still exists, but no longer works. Furthermore, the 'E=0' flag is removed from ATF additional build variable. It was added by commit deb8d71c9285eb60bc3d28e8abcf7208f78980a7 to avoid TFA build failure because of '-Werror' flag. However, from version v2.6 or later, it is not required anymore, the compiler warning was fixed. The ATF patch "board/arrow/avenger96/patches/arm-trusted-firmware/ 0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also has been removed. As it was not required due to using the new dhcore DTS file for the ATF build. Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> [Arnout: switch to BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom lts-v2.8.16] Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:44 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="lts-v2.8.16"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-nodtb.bin"
configs/avenger96_defconfig: bump ATF version to v2.8 LTS This patch upgrades the ATF version to the v2.8 LTS version. Please note that due to DTS changes from upstream commit 51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build variable is also modified to use the new DTS file. Note that the old DTS file still exists, but no longer works. Furthermore, the 'E=0' flag is removed from ATF additional build variable. It was added by commit deb8d71c9285eb60bc3d28e8abcf7208f78980a7 to avoid TFA build failure because of '-Werror' flag. However, from version v2.6 or later, it is not required anymore, the compiler warning was fixed. The ATF patch "board/arrow/avenger96/patches/arm-trusted-firmware/ 0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also has been removed. As it was not required due to using the new dhcore DTS file for the ATF build. Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> [Arnout: switch to BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom lts-v2.8.16] Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:44 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157a-dhcor-avenger96.dtb BL33_CFG=$(BINARIES_DIR)/u-boot.dtb"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/avenger96_defconfig: bump U-Boot version to 2024.01 Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-03-19 13:23:42 +01:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
BR2_TARGET_UBOOT_FORMAT_DTB=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp15xx-dhcor-avenger96"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 13:15:04 +01:00
# Additional tools
configs/avenger96_defconfig: add support for Arrow Avenger96 board Very similar to the other stm32mp157-based boards, except that we use the multi_v7 defconfig for ease of maintenance. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-07 22:52:27 +01:00
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink